Manufacturers of construction equipment on the Russian market are mainly represented by foreign companies. However, the latest developments of domestic enterprises in this niche are seriously competing even with brands like Makita and Bosch. Among the leaders in the Russian segment of manufacturers of power tools, we can note the Enkor company, whose conveyors produce high-quality and functional jigsaws. The Corvette-88 model not only illustrates the responsible approach of developers to the business of tool production, but also gives users a whole range of new operational possibilities.
General information about the tool
The main task of the machine is to perform cuts on wood sheets. The design of the equipment was designed with the expectation of compliance with two conditions. Firstly, the master must be able to perform complex curly cutting. Secondly, the platform of the machine must allow the operator to carry out work operations with dimensional workpieces without the risk of injury and a decrease in cutting quality. To this end, the creators provided the Corvette-88 jigsaw with a large frame overhang, whichmakes it possible to operate the machine even for lovers of large-scale modeling. By the way, the massive base also improves the reliability of the equipment. A stable platform gives a minimum of vibrations, which also affects the quality of the result. As for curly cutting, the owner is available for the implementation of straight, oblique, transverse and longitudinal cutting along the intended lines.
Specifications
It can be said that the main advantages of the machine are its design parameters. It has already been noted that the Korvette-88 jigsaw has a large platform, which also determined the considerable production characteristics of the tool.
- Machine dimensions - 59 x 33 x 34 cm.
- Weight - 22 kg.
- The thickness of the blank is a maximum of 5 cm.
- The maximum width of the workpiece is 40.6 cm.
- The power of the unit is 150 W.
- Input voltage - 220 V.
- Frequency range - 700/1400 rpm.
- Cut thickness – 0.25 mm.
- Cutting length - 133 mm.
- Saw blade width 2.6mm.
- Saw depth - 5 cm.
- Tilt angle up to 45 degrees.
- Working platform parameters - 36.5 x 20 cm.
Jig saw features
Designers sought to subordinate the machine to the needs of the universal master, so most of its kind of innovation is focused on ensuring the "omnivorous" tool and the breadth of work operations.
So, thanks to the emphasis withdegree scale, the operator can perform corner cutting even without marking. At the same time, the implementation of non-standard cuts involves certain risks in terms of injury. For this reason, the Corvette-88 has a high-strength casing that protects against chips and chips. The presence of the casing itself does not in any way reduce the visibility for the user. The jigsaw control system is also quite developed. There are two speed modes to choose from. The working canvases are fixed at two points in such a way that an experienced craftsman can replace them with minimal disruption to the overall production process.
Scope of delivery and accessories
The basic kit includes a direct working installation of a jigsaw, a transport stop, a saw blade guard, an air tube and a screw with a nut for disassembly and adjustment of operational parameters. I must say that the base of this jigsaw, like most modern power tools, is regularly improved, allowing you to integrate all new useful additions into the design.
One of the last such inclusions was just an air tube designed for dust removal. In addition, the Enkor Corvette-88 jigsaw machine can be retrofitted with voltage stabilization devices. These are electrical blocks that provide a stable output voltage. Of course, it is impossible to work on such a machine without cutting blades. The company develops special sets of thickened files,differing in the ability to work curvilinear and rectilinear sawing. The choice of a particular set of blades should be made depending on the characteristics of the target wood material.
Possible malfunctions and repair of the jigsaw
The most common problem in the operation of this machine is the breakage of the saw element, which can occur either due to wear or due to improper tension. The prevention of such problems can be a revision of the tension force, the exclusion of lateral mechanical effects on the blade and the correct selection of the saw size for a particular workpiece. Quite often there are engine problems - the unit fails, does not start or overheats. In this case, you should check how reliable the network from which the Corvette-88 and its power unit operate is. The quality of extension cords is also evaluated if they were used to increase the length of the cable. In any case, reducing the load on the machine, as well as the use of the aforementioned voltage stabilizers, will help prevent such phenomena. The use of protective devices of this type prevents the rapid wear of consumables and increases the life of the power unit.
Maintenance details
Domestic technology still has advantages over foreign analogues in terms of the reliability of the element base. But it is not durable either. Timely maintenance will make it possible not only to maintain the functionality of the equipment for the declaredguaranteed term, but also to surpass it. To do this, regularly check the tightness of moving machine components and connections. Lubrication measures are also required. In particular, "Encor Corvette-88" must be lubricated with machine oil every 50 hours of operation. Processing is carried out in areas with groups of bearings and in drive units. A wax paste is used to maintain the surfaces of the working platform. It should be applied delicately and with minimal mechanical impact on the coating. You should get a thin, but hermetic protective layer that will ensure that the electric jigsaw is ready for technical conservation.
Positive feedback
The unit is quite powerful, and this is one of its main advantages. The user can count on complex and at the same time productive processing of both thick plywood and dense solid wood. The design can be adapted to any request, depending on the requirements for a particular project. Especially many home craftsmen appreciate the provision of detailed documentation on the unit, which makes it possible, if necessary, to modify the Corvette-88. Reviews, for example, point to the advisability of converting the fixing device to pinless high-strength files that reduce vibration.
Negative reviews
Disadvantages can also be reduced to individual design miscalculations, without which such a tool rarely does. Users note that the sheet parts of the body in some places are not very well made.carefully. Reliability does not decrease from this, but the curvature of the skin spoils the appearance. In turn, the saw blade tension regulators play in places. Many machine owners attribute this to the fact that the Corvette-88 quickly wears out the saws. There is also criticism of the developers for the triangular cams of the lever. The fact is that they are made of brittle cast iron in order to ensure reliability. But the nature of the operation of the machine is such that the impact on these parts causes a strong tension, as a result of which the files sometimes crack and literally break into two parts.
Conclusion
In the line of domestic electric jigsaws, this model will undoubtedly take, if not the first, then one of the leading places. The unit is designed for the average craftsman who works with wood-based panels for further decorative products. At the same time, the Corvette-88 machine should not be confused with manual jigsaws. These are representatives of the same category of tools, but they are designed for different tasks. The unit in question is more often used to work with dimensional workpieces, in which the formation of complex cuts is provided. Moreover, their complexity is determined not only by the curvature of the lines being created, but also by the mechanical rigidity of the thick material.
