Everyone wants the final resting place of a loved one to be well-groomed and beautiful. Laying paving slabs on the grave is an excellent solution to this problem. Not so long ago, such ennoblement was very rare, most often very we althy people could afford it. However, today the situation has changed, and many people use tiles when arranging graves.
Pros
This option is considered very convenient, especially if relatives cannot often visit the cemetery. Laying tiles on the grave gives it a well-groomed appearance and protects it from moisture. The grave looks neat, no need to fight with growing grass. Everyone can choose material based on their income.
Basically, the following types of tiles are chosen for this case:
- granite;
- marble;
- porcelain stoneware.
Granite tiles
This viewlaying material differs in durability and the increased wear resistance. It is the laying of granite tiles on the grave that gives the whole structure a worthy, presentable and noble look. It does not allow moisture to penetrate inside the stone, thereby helping to preserve the grave and protects it from cracking.
Marble tiles
Marble tile is a very beautiful natural material. However, it has an increased hygroscopicity, therefore, in order to increase its service life, it is additionally treated with a special composition. Marble stone materials are distinguished by a wide range of colors. For laying tiles on the grave, products are most often used in sizes:
- 300х300 mm;
- 400х400 mm;
- 400х600 mm.
Marble and granite tiles are only available in square or rectangular shapes.
Porcelain tiles
This type of tile is the most popular. This is due to good performance and low price. Porcelain tile refers to artificial materials. It is obtained as a result of firing at high temperature in special kilns of a mixture of:
- cement;
- sand;
- water.
Laying tiles on the grave should be carried out exclusively on adhesives that are designed specifically for these purposes. They are frost resistant. To perform such work, it is necessary to prepare a solid concrete base. Porcelain stoneware products are distinguished by a large selectiondesign. Clover and maple leaf are considered the most popular and beautiful, but it must be borne in mind that laying material of this configuration is not easy. Therefore, it is wiser to opt for a tile of a simpler form.
Recommendations for selection
In order to simplify the technology of laying tiles on the grave, experts advise taking a product of a rectangular or square shape of standard sizes. In this case, it will be easier to customize the border frame. When using a material of complex configuration, a lot of waste is obtained. And since the coverage area is small, all defects, including tiles, will be immediately visible.
When choosing a material, it should be taken into account that the surface has a slight weight load, so a 30 mm thick tile is quite suitable.
It is recommended to decorate the graves with plain materials of dark or pastel colors. It is advisable to use products that are not afraid of negative temperatures, as well as those with increased resistance to moisture.
Laying tiles in the cemetery
This work can be done on your own, you just need to get acquainted with the technology of laying tiles on the grave and buy the necessary materials. It must be borne in mind that it is recommended to start ennobling one year after the burial. This time is necessary for the earth to settle down and become dense. Before starting work, remove all weeds from the site. Cut the soil over the entire area at a depth of 10-15see and tamp well. After that, proceed to the cladding. You can choose one of the available methods. Paving on a concrete base is considered more reliable. With the help of formwork, concrete is poured with the obligatory use of reinforced mesh or other iron scrap. It is necessary for strengthening. Tiles should be laid on the substrate approximately 7 days after pouring. Grass does not grow through such a lining, so everything will look neat.
Another easier way is to lay tiles on a sand bed. It is necessary to pour a thick layer of sand, level it, moisten and compact. Leave for a day and then start styling. In order to prevent grass from breaking through, it is necessary to put a black plastic film under the sand. It must be borne in mind that such paving in the future may gradually collapse.
There is another method when the tiles are laid on a dry mix, which includes:
- cement;
- lime;
- sand.
This is called a carving. A layer of 4-7 mm is poured, leveled, compacted and moistened. Tiles are laid on top, and a dry mixture is poured into the seams between them. Such paving should be moistened with water for several days. In order for everything to be done neatly, the facing is carried out along a stretched rope, each tile must be tapped with a wooden or rubber mallet.
Specialists note that it is most difficult to accurately calculate the laying area, since there is already a tombstone on the site, or there is a monument. Evenif self-made paving turned out well, there is no guarantee that it will stand for a long time. Therefore, if there is no self-confidence, it is best to turn to professionals who provide services for laying paving slabs on the grave. They will do this work efficiently and reliably.
