The front door is an important element of any apartment or house. It protects the premises from thieves and unwanted guests. The main criterion that it must meet is reliability. How to install the entrance doors with your own hands will be discussed in detail later.
Selecting a metal door
Installation of entrance doors begins with the selection of a suitable product. Many people prefer metal varieties to wooden doors. But, coming to the store, not everyone is sure that they will be able to choose the right door. It should have a good locking system and sound insulation. Also, a high-quality canvas has a layer of insulation. A reliable manufacturer provides a long-term warranty for its products.
To a person who came to the store behind a metal door, it may seem that its price is too high. If the seller offers a design at a low cost, the system is not in the category of high-quality products. Perhaps the door is defective. When choosing the presented design, you must first of allpay attention to reliability and quality. Don't skimp on your own safety.
For a metal door, a peephole with a large viewing area is best suited. Thanks to this, he will show the picture taking place on the other side of the door from all sides. If we turn to statistics, then approximately eighty percent of cases of robberies occur precisely in the entrances. The best solution would be to install a peephole that will allow you to carefully examine the space in front of the door.
Important details when choosing
In order for the installation of the front door with your own hands to be done quickly and without problems, you must always pay attention to the details during the purchase process. A lot depends on them.
So, for example, first of all, you should inspect the hinges. If a burglar wants to enter the house, he can easily knock down low-quality fittings with a sledgehammer. To avoid such a nuisance, you need to install anti-removable pins. The more, the better.
Before you install the front door, dismantle the old structure, you should consider the main points that you should pay attention to when choosing a new product.
The lock is, although temporary, but an obstacle for people who decide to enter the apartment. An absolutely reliable design has not yet been created. However, the lock will delay the intruder for some time. Therefore, it is very important when choosing to pay attention to the design. It must be complex. Today, one of the best is considered a cylinder lock. He is differenthigh reliability.
Preparing for installation
Do-it-yourself installation of an entrance metal door is not an easy task. Here you will need to act in stages.
First, you should prepare the doorway, that is, fit it very accurately to the door to be installed. If the opening is too wide, then the door itself will look unnatural. Accordingly, there can be no question of any reliability here. The same applies to a small opening into which it will simply be impossible to install a door. Therefore, the work should be almost jewelry.
Next comes the crucial moment. It is required to push the door into the opening. And in order for it not to fall, you need to open the canvas ninety degrees and substitute a support under the bottom. Then you need to take the rack level and move away. From afar, the owner of the door will see how the product looks, whether it fits well into the opening.
Installing the door unit
Installation of entrance doors after the preparatory process involves the installation of the box. You can start leveling the door block. It is necessary to try to do everything so that in relation to the vertical edge of the plane they take the exact position. Set the level to the hinged side of the box. Under the part that is opposite, you need to put wooden bars. This way you can achieve the desired position of the door block.
Now it's time to deal with the fit of the new door. Extend the topor the bottom of the box is required. The door is installed on the wall. There may be some inconsistency in doing this work. Doors can open and close by themselves. In this case, you will need to align the entire system. Skews cause similar problems.
Installing the door frame
In a certain sequence, the entrance doors are installed. Installation involves, after carrying out the above manipulations, to fasten the door frame. It is worth starting from the side where the canopies are located. It is required to drill a hole through the eyes, where the anchor will subsequently be inserted (it is not necessary to tighten it). This procedure is continued with all other eyelets on the same side. Then you can move on to another part of the box.
After that, it's worth taking the level again and starting to tighten the anchor from the side where the awnings are. After completing the process on one side, you need to move on to the other, not forgetting the installation level. The result will be a solid door block.
Finishing installation
Installation of the entrance metal door is completed by a number of simple works. If after installation the unit still staggers a little, then you should not worry. Mounting foam will help fix it. It is worth taking a closer look at the door. You need to close it and check the operation of the lock. If its bolts do not pass through the reciprocal holes, you need to align the canvas with a level.
Afterthis you can proceed to the final stage. There is no particular difficulty here. It is necessary to take a can of mounting foam and shake it well. Then fill with its contents all the gaps between the opening and the door itself.
Why you shouldn't pay attention to appearance
For most people, the main criterion when choosing a particular item is the aesthetics of the product. This is useful when buying clothes or furniture. But when it comes to safety, the appearance of the product should be the last thing to think about. Here, the main criterion should be reliability and quality.
Metal doors have a discreet appearance. But they, unlike wooden varieties, are less aesthetic, their design is not so diverse. Therefore, you should not give preference to a beautiful, but unreliable design.
Expert Tips
A door made of metal is a reliable protector of any home. It must be chosen correctly. In this case, the house will be reliably protected from burglary and theft. Entrance doors that are of high quality will also be faster and easier to install.
If the design is not reliable, then you should not expect that the system will be able to protect the home from the entry of unexpected guests. A lot depends not only on the door itself, but also on its manufacturer. Details matter a lot. The safety of the house also largely depends on the correct installation.
In order for the installation procedure to be successful, and the door to meet all the requirements of the buyer, you should purchase products from trusted manufacturers. This iswill allow you to avoid significant financial losses, thefts and other similar troubles. Having considered how to choose and install the front door correctly, you can do all the work yourself. Acting in accordance with the instructions, relying on the advice of experienced professionals, you can mount a reliable structure that can block the way for intruders into your home.
