Slopes for entrance doors. Installation and finishing

Table of contents:

Slopes for entrance doors. Installation and finishing
Slopes for entrance doors. Installation and finishing

Video: Slopes for entrance doors. Installation and finishing

Video: Slopes for entrance doors. Installation and finishing
Video: How To Install A Door On An Unlevel Floor 2024, March
Anonim
slopes for entrance doors
slopes for entrance doors

The front door is an important part of any apartment. It is able to provide security and reliable protection, keep the house warm, and also not let in extraneous noises and sounds. Now installing a new door yourself is not difficult. But it is important to know that slopes suffer during such a replacement. This cannot be avoided - this is the specifics of the repair.

Slopes for front doors have two important meanings. Firstly, they help keep the apartment warm. And secondly, with the help of these elements, you can ennoble the appearance of the door itself. When choosing a material for finishing, you should remember that the service life of door slopes will depend on its quality.

entrance door trim installation
entrance door trim installation

How to finish the slopes of the front door?

The cheapest and most affordable way to finish slopes is plaster. This material has a high level of sound insulation and keeps the house warm.

In order to get a smooth and even surface, the slopes for the entrance doors can be finished with drywall. Such material is easily attached with glue or self-tapping screws. Slopes for entrance doors fromdrywall can be decorated in any design way that will give the room a beautiful and elegant look.

Finishing slopes with sandwich panels will help provide high-level thermal and sound insulation. But the use of such material has not received much popularity due to the peculiarities of its structure. A thick layer of insulation sandwich panels hides a significant part of the space of the doorway.

Expensive, but noble material for finishing door slopes is wood. It is very easy to work with him, he gives the door an aristocratic look. MDF can serve as a replacement for wood. This material (at the discretion of the customer) can be varnished or simply laminated.

Installation of front door slopes

Entrance doors, unlike interior doors, require more careful finishing. And materials are chosen with increased strength, having a high level of sound insulation, contributing to the preservation of heat. Installation of door slopes is carried out in several stages.

how to finish the slopes of the front door
how to finish the slopes of the front door

First, you need to get rid of the gaps between the wall and the door frame. They are filled with mounting foam, and after drying, its excess is cut off with a knife. Then the surface is cleaned so as to eliminate all irregularities.

After that, a primer is applied to a flat surface. It is needed for better adhesion of the plaster to the wall. Having prepared the plaster mixture, it is applied to the surface of the slopes with a layer of the desired thickness. After waiting for the mixture to dry completely, you can proceed to the decorative finish. Slopes for entrance doors ennoblevarious materials, having previously carried out certain measurements.

Slope finishing means care and precision in work

Do-it-yourself installation of slopes is quite simple. The main thing is to follow certain rules: to accurately take the necessary measurements, not to try to complete the work faster, to try to remove all the bumps and shortcomings when they are first detected. Only then can good results be achieved in the work on finishing slopes. And high-quality material will help to extend their service life.

Recommended: