How to paint ceilings? The question is stupid at first glance. Indeed, it’s easier not to think of anything than just picking up a roller and walking it over the entire surface of the ceiling. But it's not. Each process has its own technology that must be followed. This is the key to a successful job.
If you do not know how to paint ceilings correctly, you can get an unsightly result, which, instead of pleasant feelings from a fresh and beautiful renovation, will only cause disappointment in your soul. In our case, these are the so-called non-paints. That is, areas of the surface where the paint has a different texture and, as a result, different shades. To avoid such a result, several very important recommendations should be followed. If you follow them, then the probability of high-quality work will increase significantly.
The first thing to start with is the choice of tools. This work can be done with a spray gun, roller or brush. It is better to cut off the last option right away, because with its help you getperfect result is very difficult. This is only for great professionals. Using a spray gun is, of course, a good option. But it needs to be taken somewhere else. If you buy, the cost of repairs will increase significantly. The most suitable tool is a roller. The price does not bite, and getting a quality result with it is quite simple. Therefore, let's try to figure out how to paint the ceiling with a roller.
The issue with the painting tool has been resolved. You can safely get to work. And the first thing to focus on is mixing the paint. A lot depends on the quality of this operation. If it is unevenly mixed, then the texture of the paint applied to the ceiling will be different. And this will lead to stains. The paint must be uniform. Be sure to read the manufacturer's instructions. If it is written there that when stirring, water or other liquid should be added in some quantity, then this should be done. If there are no such recommendations, then you should not do it on your own initiative.
The distribution of ink on the roller is very important. And anyone who knows how to paint ceilings will attest to this. It must be even. It is very easy to achieve this. The roller should be dipped into a container of paint. It is to dip, and not to immerse completely. After that, the paint on the roller should be rolled out on a pre-prepared grid or on a piece of hardboard or linoleum, or even better, purchase a special container. This isnecessary in order to evenly distribute it throughout the instrument. It is possible that you will have to lower the roller into the paint container again. If this is not done, but immediately proceed to applying a decorative layer to the ceiling, then there is a high probability of stains due to different thicknesses of the paint layer in certain areas of the surface. And this will immediately catch your eye.
The next important point in the question of how to paint ceilings correctly is the application of the material itself. This must be done evenly and quickly. There should be no gaps in work. The entire operation for applying a decorative coating should take 15-20 minutes. During this time, the paint will not have time to dry. It will have an even texture. If there are gaps somewhere, then they should be painted over immediately before the paint dries. It is not always possible for the performer to see this, so it is better to place an assistant in the corner of the room who would look at the work being done and point out problem areas.
With the very process of applying a decorative layer, everything is clear. Another question: "How many times to paint the ceiling?" To achieve the required quality, it is enough to apply 2-3 layers. Moreover, each of them should go perpendicular to the previous one. With this approach, small defects will be almost invisible. Another important condition that should be observed is that each subsequent layer must be applied after the previous one has completely dried. It is very important. Drying time is indicated on the package.
