Lime deposits can form on tiles as a result of exposure to hard water. At the same time, s alts remain, even despite the use of any cleaning methods. Splashes of plain water, falling on the tile, after a while will cause the appearance of limescale, which is not so easy to get rid of. But worst of all, over time, mold and fungus can join this problem. They not only negatively affect the appearance of the walls, but are also extremely harmful to he alth. This is especially true for children and people suffering from ailments of the respiratory system. Therefore, it is extremely important for every housewife to have information on how to clean the tiles in the bathroom. To do this, it is absolutely not necessary to use expensive modern tools. Simple folk methods are also very effective.
Helpful tips
Even white tile in the bathroom can become covered with visible stains over time. They have a rough surface andcrystal structure. To make it easier to resist dirt, it is recommended to wet clean the bathroom at least once every two weeks.
Today, in any large supermarket you can buy special detergent compositions for the bathroom. They help to clean not only limescale, but also help get rid of mold and rust. Spray-on products work best, they are quickly and evenly applied to the surface. As an option, you should also try a simple dishwashing gel. Limescale in the bathroom is easiest to wipe off with a special sponge. Patterned tiles should not be washed with products containing abrasives.
Before using a tile cleaner, test it on a separate area. The surface must not be damaged by chemicals. If you do not conduct such tests in advance, then you can permanently ruin the tile.
Cleaning Tools
How to clean bathroom tiles from plaque? For basic cleaning you will need:
- soft lips;
- universal viscose napkins;
- old toothbrush;
- small terry towels and microfiber.
Modern housewives are advised to use a steam cleaner to clean the walls from dirt and plaque. After treatment with moist warm air, it is recommended to wipe the tiles with a window cleaner and wipe dry. This will make the surface shiny and radiant. Cleaning workbath from plaque is carried out using rubber gloves and eye protection.
Causes of mold and mildew
This issue needs to be given special attention. Mold in the bathroom can form not only at the joints of the tiles, but also on their surface. It is best to start fighting the fungus at an early stage. In this case, you can protect yourself and your family from problems.
Fungus and mold can appear on walls due to:
- violations of tile laying technology;
- too high humidity in the room;
- lack of regular antiseptic treatment;
- Incorrect ventilation system.
It is best to use special cleaning compounds to combat fungus and mold, such as Silit Bang. However, they are not cheap, and they are not always available, especially in small shops. If you don’t have such a tool at hand, you can try other methods for cleaning tiles.
Alternative remedies
How to wash tiles if there is no special tool at hand? Experienced housewives are advised to try a bleach solution or plain whiteness. It must be applied to the surface of the walls and left for half an hour or an hour. After that, the product will simply need to be washed off with clean water. During the procedure, special respiratory protection devices should be used, since the chemical composition has a specific pungent odor. Immediately after treatment, the room should be well ventilated.
If strongerSince the joints between the tiles are dirty, you can try to clean them with a special stiff brush and soda ash. In addition, hydrogen peroxide should be used to whiten the joints between tiles. It must be simply applied to the surface and not washed off. If all the measures described above were ineffective, then you will have to change the grout for the joints. The surface must first be treated with an antiseptic composition. It is best to use special grout for bathrooms. Of course, the easiest way to clean surfaces is to use a steam cleaner. Tiles, tiles, glass after such processing will simply shine.
DIY cleaner
How to whiten the seams between tiles without using special compounds? At home, you can easily and simply prepare a surface cleaner that does not contain aggressive substances. This composition is suitable for tiles of any kind. It has no harsh odor and removes all types of dirt.
To prepare a solution for washing tiles you will need:
- hydrogen peroxide - 100 grams;
- liquid laundry soap - 50 grams;
- baking soda - 5 grams.
All of the above components must be mixed and applied to the surface of the tile with a soft sponge or cloth. The composition should be left for 10-20 minutes, then rinse with warm water. If you use toilet soap instead of laundry soap, the homemade product will have a pleasant aroma.
How to quickly clean floor tiles?
So, is there a secret? The floor tiles are highly resistant to abrasion. Therefore, it is quite possible to use substances containing abrasives to clean it. Light or white tiles are best washed with warm water and soda ash. Dark tiles should not be cleaned this way, as stains may remain. In this case, it is most effective to use warm water with the addition of a special agent, for example, Silit Bang. It won't leave streaks and will give a subtle fresh fragrance.
Clean light tiles
Black mold is most noticeable on white tiles in the bathroom. How to get rid of this unpleasant manifestation? If the pollution mainly concerns the joints between the tiles, then in this case it is best to use soda ash or washing powder. You can also try scrubbing off dirt with a kitchen cleaner that does not contain large abrasive particles.
Tiles, tiles and other surfaces are easily washed out without the use of household chemicals. Many improvised means can easily cope with any kind of pollution in the bathroom. Among experienced housewives, a solution of soda and vinegar has gained wide popularity. Already 10 minutes after applying this product, there will be no trace of dirt and whitish spots.
Lime deposits and dirt can be removed using citric acid. The walls just need to be rubbed with a slice of citrus or sprinkledconcentrated solution of citric acid and leave in this form for a while. After that, the surface is simply rinsed with warm water.
You can clean the tiles in the bathroom using vinegar. This substance not only helps to get rid of stains, but also gives the tile shine. Ammonia will help remove dirt and plaque. It also removes fungus and mold well. When working with this composition, be sure to use a protective mask, as it has a very unpleasant pungent odor.
Clean any surfaces in the bathroom really and with the help of acids. However, it should be borne in mind that they can ruin the glossy tile. Use extreme caution when handling this type of compound.
Dealing with rust
We have already figured out how to remove black mold in the bathroom. How to get rid of other contaminants on the tile? You can use different methods.
To clean rust, you should use cream of tartar. Usually this substance is sold in the form of a powder. They are sprinkled with the necessary area, and then wiped with a sponge dipped in water. To speed up the cleaning procedure, it is recommended to pre-treat the surface with hydrogen peroxide.
How to clean the tiles in the bathroom from rust? Baking soda and vinegar are good for getting rid of stains. Handle the surface only with rubber gloves. The sponge should be moistened with a 6% vinegar solution, and then sprinkled with baking soda. After these two substances react, it will be possible to proceed toprocessing.
Rust on tiles can also be removed with lemon juice and s alt. The contaminated area should be moistened and left in this state for 25 minutes. After that, the surface is sprinkled with s alt and rust stains are removed in a circular motion. It is best to use a meal powder that does not contain stones and crystals.
Features
Before you try to remove any contamination from the tile, you should clarify whether this surface has any characteristic feature. For example, matte tiles need to be cleaned only with the help of specialized products. Strong pollution can be cleaned if ammonia is used. After it, a special emulsion for matte ceramic products is applied. This method will help to preserve the original appearance of the tile for a long time.
If the tile, on the contrary, is glossy, and you want it to shine, then you need to take a special wax. Some believe that the same tool can be used as for a car body. However, such a composition will immediately be washed off under the influence of water and hot steam.
Conclusion
In this review, we examined in detail how to clean bathroom tiles. You can use both ready-made formulations and folk remedies. Recipes based on ammonia, vinegar, citric acid, soda and s alt in most cases are extremely effective. Try to clean your bathroom regularly. Then you do not have to suffer, wiping off strong pollution.
