The final stage of installing any plastic window is the installation of flashings at the joints. This element is an integral part of the decor. The flashing for plastic windows has another name - a feigned bar. Being an element of decoration, it performs some functional duties, namely, it hides the gaps between walls and window blocks, which are sometimes formed during the installation of the structure.
Selection rules
When choosing a flashing for plastic windows, do not forget about two important points.
- First, you need to carefully choose the manufacturer. This requires an individual approach. Look for flashings that have proven their quality from manufacturers of metal-plastic windows (SALAMANDER, REHAU, VEKA, TROCAL) or manufacturersfittings (WINKHAUS, MACO, EXPERT).
- And secondly, this fixture should be in harmony with the already installed windows and their finishes. This is important when choosing the specified device. The flashing for plastic windows should be chosen from the same material from which the windows are made. To get a whole picture, do not forget about the harmony of color and design of the structure.
Varieties of flashings
Currently, the main criterion for the difference between these products is the material from which they are made.
- PVC flashings. They are sold in rolls. Waste during their cutting will be no more than 1%, which indicates the cost-effectiveness of this option. As a rule, these devices are made with a self-adhesive layer, which greatly simplifies their installation. However, in this case, it is necessary to observe the temperature regime. Installation work must not be carried out at temperatures below 5 degrees. This is important in this case. If the temperature is below the specified mark, then it is necessary to preheat the surface to be treated or resort to such additional fasteners as self-tapping screws and screws. Another advantage of these devices is the possibility of their use in rooms with high humidity, such as kitchens and bathrooms.
- Flats made of wood are also called layouts. They are mademostly pine. Most often they are used when installing window blocks made of wood. Characteristic features of this type of flashings: environmental friendliness, aesthetics and durability. They are also characterized by a huge variety of shapes: curly, book, flat, semicircular.
- Metal flashings. The material for their manufacture is galvanized steel or aluminum. As a rule, they are used in the construction of hangars, buildings, garages. Installation of flashings on plastic windows in this case ends with a layer of polyester. This is necessary to give the design an external aesthetic appearance.
Result
After reading this article, you can easily pick up flashings for plastic windows, the price of which will be quite acceptable (from 20 to 450 rubles, depending on the size, shape and material of the product). Don't chase the lowest prices. A flashing for plastic windows, made of quality materials, will have an appropriate cost. Choosing a cheap product, you may encounter some nuances. Namely: fragility, shape change during installation and further use, manufacturing defects are also possible.
