A private house is always a lot of trouble and worries, especially in terms of its arrangement. For example, when we build our own housing, we try to make it the most reliable and durable so that trouble does not happen to it, as with the houses of Nif-Nif and Nuf-Nuf. Therefore, everything is important: the choice of construction technology, the selection of materials, and the design features of the future building. A lightning rod in a private house also plays an important role.
Protection against natural disasters
Today's news is simply full of various events related to natural anomalies and cataclysms. And one of the most dangerous for humans is lightning. If it gets into the house, it can lead to a fire, and therefore a lightning rod in a private house must be. According to the laws of physics, lightning is a spark of electrical origin. To reach the ground, she seeks a conductor of metal. And elements such as antennas, a metal chimney, zinc roofing can provoke lightning strikes into them. And that can lead to trouble.
It is to protect the house fromsuch dangerous consequences, a lightning rod is installed in a private house. Ideally, it should be built on a separate tower, so that in the event of a lightning strike, the strike fell not on the house, but on the tower itself. But before you build a lightning rod, you need to do certain calculations. First, you need to find a place for this design. As a rule, for this, a piece of land is chosen the most distant from a residential facility. Secondly, the height of the lightning rod plays an important role: it should be at least two meters higher than the building, but not too high.
Mounting the tower
To put a lightning rod in a private house, you need to build the tower itself. Its design can be any, the main thing is that there is space in the middle of the tower - a grounding conductor will be laid here. Clamps are installed on the tops of the tower, a copper or aluminum rod is attached to them, which is connected to the ground. The finished tower must be dug into the ground to a depth of at least two meters. After strengthening the structure, lightning protection and grounding are connected. To equip the ground around the tower, you need to draw a triangle with equal sides. Reinforcement is dug into its tops to a depth of about two meters - it serves as a ground loop. Then you should connect them together with metal rods. The last stage of work is the connection of the lightning rod conductor to the ground.
In order to correctly and competently build a lightning rod in a private house, the scheme is simply required:it will help to avoid possible mistakes. In addition, it is important to make all connections carefully and responsibly - only in this case it will be possible to protect your home. It is best to overlay the conductor with a corrugation - it will help prevent the appearance of oxidation, which will reduce the conductive properties. The tower also needs to be painted to protect it from corrosion.
A lightning rod in a private house is an important component of the safety of living in it. This structure is especially relevant for open areas or zones located on hills. You should think about a lightning rod at the design stage of a country house - this will allow you to protect your home from one of the most dangerous elements in a timely manner.
