The hood is one of the main elements that should be present in every home. It is important that the person in the room breathe fresh, bacteria-free and dust-free air. The hood plays an important role in purifying the air in a wide variety of rooms. However, without an additional element, namely the Krona hood filter, this is not possible. The hood filter is an important, even the main element that can trap grease, soot and other harmful particles.
What are the filters for the hood
Cleaning filters for hoods, there are three types: aluminum, acrylic and carbon.
- The Krona hood aluminum filter is also called grease filter. Its main task is to capture fatty particles. This is a reusable unit that is easy to clean and easy to install.
- Acrylic filter, like aluminum, performs a grease-catching function. In addition, it serves as a protection for the exhaust motor.
- The carbon filter protects ventilation not only from grease, soot and dust, but also eliminates unpleasant odors. Because it is so versatile, itcan safely be called universal. The filter works according to the circulation mode with activated or purified carbon.
The main advantage of the carbon filter is the ability to absorb fumes and contaminants that other devices cannot eliminate.
Specifications for grease filters
The grease filter for the Krona hood, or as it is also called, aluminum, is designed to trap soot and grease particles. Grease filters are disposable and reusable.
The first devices are made of cardboard, non-woven fabric and synthetic winterizer. So that every housewife can change the filter in time, special marks are applied to it, which disappear from the surface and signal that it is time to change the filter.
Unlike disposable devices, reusable devices can be used again after thorough cleaning. In turn, reusable filters are divided into two groups:
- acrylic;
- metal.
Outwardly, most filters resemble small mats, they are included with many hoods.
Cleaning the grease filter
In order for the grease filter for the Krona hood to serve for a long time, it must be regularly cleaned of dirt. Dirt and soot accumulated on the surface of the filter adversely affects the operation of the device. Thus, all fat particles settle on the walls, ceiling and on the structure itself.
There are manya variety of ways to clean the filter from dirt and grease:
- Soak the filter in hot water and add detergent, after ten minutes clean the remaining dirt with a brush.
- Dip the filter into the soap solution and add two tablespoons of baking soda. Wait a few minutes and rinse with plain water.
- If heavily soiled, it is better to boil the filter for fifteen minutes in a large container.
Carbon filter features
Because the Krona hood charcoal filter is made of both plastic and synthetic fabric, the appearance of the devices differ from each other.
- A round plastic cassette is filled with charcoal.
- The synthetic fabric filter is impregnated with the same solution.
The principle of operation of the carbon filter for the hood is as follows:
- air, getting into the hood, passes through a dense viscose layer impregnated with charcoal solution, and is partially cleaned;
- then goes directly to the cassette where the special granules are located.
After several cycles, the air in the room becomes clean and free from unpleasant odors. If the performance of the hood has dropped sharply and the filler is heavily contaminated, it is best to purchase a new filter. To prevent this from happening, you should choose a filter with a sensor that signals an immediate replacement.
Setting the filter
Before you start installing the filter for the Krona hood, you should carefully read the attached to the deviceinstruction. It indicates in what sequence it is necessary to install the filter. Sometimes the instructions contain pictures that greatly simplify the installation work.
To install a charcoal filter that looks like a rectangular panel, you must follow a simple instruction and follow the order of installation rules:
- unpack the product and fix the mounting bracket;
- open the door and remove the grease filter;
- install the carbon filter and fix it with a screw;
- install the grease filter and close the door.
Advantages of circulation devices
Customers often ask why buy filters for Krona hoods when there are ordinary air ducts, because this is an additional expense. Despite the fact that the filter hood is a little more expensive, it has a lot of advantages, namely:
- Compact.
- Heat insulation.
- Easy care.
- Easy installation.
- Autonomy.
These installations have almost no flaws, which is why they are so popular. All you need to do is change the filter on time. Simple operation, but how much benefit such a device will bring to the owner who equipped the hood with this kind of addition. The charcoal exhaust filter is indispensable, because it is characterized by a lot of positive characteristics and, importantly, makes the air really cleaner.
When you buy a filter for a Krona Kamilla hood, youyou will never regret your choice. Easy installation, quick cleaning and, most importantly, affordable price. Timely replacement of filters will extend the operating life of the hood, clean the room from dust, bacteria and unpleasant odors as efficiently as possible.
