The hood is an indispensable element of any kitchen, which ensures the purity of the air and the removal of excessive moisture from the room. There are different types of presented devices. However, hoods with an air duct are most often used. They are connected to a common ventilation system. Kitchen exhaust ducts come in a variety of sizes, materials, colors and shapes.
So, the presented elements can be made of plastic or aluminum. The second option is represented by a corrugated pipe, which is connected at one end to the hood, and at the other - to the ventilation duct. It is cheap and practical. However, it does not fit very organically into the overall interior of the room, so such air ducts for kitchen hoods are installed if they are located in a closed bedside table. The disadvantage of corrugations is that due to the folds, it may not do its job as efficiently. However, it is very quickly mounted and does not require any special tools. But you need to pay attention to the fact that the metal is not too thin, as it quicklywill break.
Plastic kitchen exhaust ducts are quite attractive in design, they can have different shapes. In addition, such elements are very easy to clean, do not accumulate harmful bacteria. The only drawback of such products is that they may not withstand high temperatures and melt. In principle, situations rarely occur in the home kitchen when too hot air (90 degrees or more) passes through the hood. Naturally, you need to choose such a device based on your individual requirements, as well as the conditions in which the item will be used.
Now you need to figure out how the ducts for the kitchen hood are attached. In principle, this procedure is relatively simple, and you can handle it without a specialist. However, all work must be done accurately and accurately. So, if you decide to use an aluminum element, then you need to purchase special clamps to connect to the hood and ventilation duct. Naturally, corrugation should be chosen if the neck of the main device to which the product will be attached has a round shape.
During installation, make sure that the clamps are tightly tightened, and the pipe itself does not have sharp bends that will impede the outflow of steam. Also, be sure to pay attention to the fact that the air ducts for the kitchen hood should be as short as possible. In this case, the efficiencypurifier performance is the highest.
The rectangular air duct for the hood is also quite easy to install. The fact is that it is enough to install it on the cleaner and attach it with a clamp. It does not cause any difficulties. However, if the hood is in the wall, then you will have to attach a knee to the main duct. As for the shape of the neck of the cleaner, there are no problems here, since there are various adapters.
