No matter how good a wooden bed is, sooner or later it will creak when moving, interfering with sleep and rest and just unnerving. With all the preserved comfort of the bed, such a tangible minus as a creak will be the reason for the deterioration in the quality of sleep, and hence human he alth. At the same time, changing this bed to a new one is not the most cost-effective solution. In most cases, we are talking about repairing furniture and eliminating the auditory irritant that has appeared if the wooden bed creaks. How can I fix this so I can continue to use my favorite bed for many more years?
Causes of bed creaking
It is quite possible to get rid of the squeak without being a furniture specialist. However, if the wooden bed creaks, the only way to solve the problem is to first understand what is causing the furniture to make these unpleasant sounds.
Most likely, this is due to the natural process of drying out of natural material - wood. An equally common reason may bethat the fasteners of the bed parts weaken over time.
But you should exclude the sound that may come from the old mattress, as in this case it turns out that it is not a wooden bed that creaks. What to do to understand if the mattress is to blame? You just need to take it off and put it on the floor, then lie down and move around. If there is no squeak, then you need to continue the study of all parts of the bed: slats or boards under the mattress, all docking points without exception, as well as the frame and legs. As soon as the place or places of the defect are found, you can begin to act in accordance with what exactly causes the squeak.
Loose bindings
Loose fasteners are the most common cause of unpleasant sound, since all materials, without exception, tend to wear out, and over time, one part begins, at abrasion, to come into contact with another more tightly than was intended by the design. In addition, from the movement and weight acting on the parts, the tightness of the fastening can also weaken. In such cases, it is sufficient to tighten all nuts and bolts.
But it happens that from time to time they are no longer able to withstand the load on their own, and the wooden bed creaks. What to do in such cases? You need to install additional fasteners. For example, special corners made of wood or metal, which should be screwed on the other side of the furniture. Instead of corners or in addition to them, you can strengthen all joints with wood glue.
By tightening, strengthening and letting the glue dry, you can check if the squeak has disappeared. If it remains, you need to use one of the types of lubricant, which covers the joints of the bed to eliminate friction from all the wooden parts of the frame. You can use special silicone grease, grease, paraffin and even ordinary soap. These works must be carried out carefully and very carefully, since there is a high risk of damage to the upper protective and decorative layer of wood.
Gluing joints
A very good proven way to eliminate bed squeaks is to use rubber glue to seal the holes that cause the bed to squeak. The adhesive remains flexible enough to hold the filled space securely. You need to use this method according to the following instructions:
- Disassemble the bed into the smallest possible parts to assess the degree of wear.
- Degrease all joints with any alcohol, let it evaporate.
- Carefully apply rubber glue to each of the prepared parts.
- Immediately after application, we assemble and make a wooden bed back and, putting it in its usual place, wait for the glue to dry completely, in accordance with the recommendations on the package.
After that, the creak should not remain. The only disadvantage of the described method is that the glue between the elements will not allow you to easily disassemble the bed again in the future.
Reiki
The very slats on which the mattress is located is no less popular reasonwhy does it happen that a wooden bed creaks. What to do in this case? You can only fix the problem by replacing old defective rails with new ones or by trying to swap old rails.
Legs
It happens that the reason for the creak lies in the legs of the furniture. This defect is the most difficult task for a home repair. The legs, of course, can be replaced with others, but their installation can be quite difficult even for professionals. But you can simply remove the legs, for example, by sawing them down, without special skills and tools. In addition, instead of a boring classic bed, the result can be a new fashionable and original element of the interior - a platform for sleeping and relaxing, standing right on the floor.
Visual change of scenery, stability and elimination of squeaks can thus be achieved simultaneously. Of course, this solution is not suitable for everyone, but you can still consider it. Who knows, maybe someone close will wake up the talent of a room designer, and the platform bed will become the most favorite piece of furniture in the house.
What else can you do if a wooden bed creaks
What to do for those who have not been helped by the above methods? You can get rid of a squeak without resorting to drastic measures if you try to apply the following tricky solutions:
- A thick pillow placed between the wall and the headboard as an additional cushioning support, significantly reducing the force of the skip.
- Smalla layer of any dense material between the frame and the mesh or bed rails.
- Special covers put on furniture legs.
- Checking the position of the mattress (moving out may cause noise).
Thus, having discovered the cause of the creak and knowing what to do if the bed creaks, you can stop this annoying misunderstanding at no extra cost and use your favorite furniture for a long time.
