Automatic sectional doors today have become the most convenient and frequently installed. They are actively in demand for their positive qualities, one of which is protection against hacking. Ease of use is complemented by an attractive appearance that can become a highlight of any building. The installation of sectional doors is not so difficult, so many can handle it themselves. In addition, the functional value of these gates is extended - it is thermal insulation and sealing of various premises (not only the garage).
What do they look like?
Installation of sectional doors can be done by everyone, but on condition that he has detailed instructions and recommendations at hand. As part of this design, there are several main constituent elements:
- Guides.
- Modules.
- Spring mechanism to control web vibrations.
Besides this, some use an additional function, itallows you to control the structure from a distance using the remote control. Everyone can cope with such constructions - to lift it is enough to press only one button.
Useful properties and features
Installation of sectional doors is suitable for those who have limited space, as the main leaf is lifted up. The panel itself can be of any color. Today you can even apply unique drawings. It all depends on the wishes of the buyer.
The manufacturing process has only a few steps. To avoid rapid wear, special agents are applied to the surface - this is corrosion protection. There are also designs with a built-in window, it is made of reliable glass that does not respond to impacts. This adds a touch of flair and also brings natural light into the garage. The gate will work in all weather conditions and at any temperature.
The locking system has its own peculiarity, therefore, unauthorized break-ins of the structure are completely excluded. In automatic mode, the web is blocked. Each manufacturer gives recommendations about the operation. If adhered to, the service life reaches ten years without the need to replace parts.
Preparation for installation
All work begins with preparation. And installation of overhead sectional doors is no exception. Experts recommend that beginners work with someone in a pair - it will be faster and more convenient. Each manufacturer includes installation instructions for sectional doors -work is underway on it. Do not skip a single step, otherwise the installation will not be correct.
Tools
What to take from the tools:
- Pliers.
- Hammer.
- Set of keys.
- Drill.
- Roulette.
- Building level.
This is the most basic, although many can add something to this list. Do not forget about personal protective equipment. Installation of sectional doors "Dorkhan" begins with checking all the components - this is also set out in the instructions. It also happens that some fasteners are not included in the kit. But they can be purchased separately.
Working on the doorway
It is important to prepare the doorway as well as the room. In order to avoid failures in the operation of the structure, it is better to devote more time to the place where it is mounted. For this, the shoulders and the lintel are located in the same plane. Using the level, measure the horizontal and vertical.
The required depth will be required, otherwise the structure will not work. To do this, the height of the gate should be 50 centimeters more, and if these are sections with a drive, then 100 centimeters. On the ceiling, you will need to make an entrance for supplying electricity. It is better to choose a large wire cross section.
The weight of such a gate will be rather big, so it is worth strengthening the ceiling and the lintel, because the load will go on them. The shoulders must also be strong, because during the installation process, guides will be fixed to them. There is a low and high rise - a lot depends on the lintel (itssize - from 20 to 55 centimeters). Installation of industrial sectional doors is carried out in the same way. Some plaster the opening to improve thermal insulation properties.
The main steps should be followed strictly according to the instructions. We must try to create the most reliable design that can last for several years.
Gate installation
When the preparatory procedures are completed, it is worth hanging the canvas itself. If the opening is not strong, then it is strengthened as much as possible. Alutech sectional doors already have installation instructions in the kit - it is as extended as possible, so even a beginner can do it with his own hands. Since the work takes place in automatic mode, you need to check each level - a large error is not allowed (more than 0.1 centimeter). If this condition is violated, gaps appear. We don't need them.
If there are no problems with this, then the panels are being prepared for installation. The cost of the entire kit is usually high, so the work is carried out carefully. There is no need to rush - it is better to think over a step several times than to buy additional components after.
What's next?
When the panels are in place, it is worth marking the places where the guides will stand and be fixed. Usually panels for a cloth are delivered unassembled. They are collected before starting work. The process starts from bottom to top. Such a gate will not function if there is a slight skew, so carefullymeasurements of the entire structure. If there are errors, do not hide them under mounting foam or boards - this will affect the entire installation.
To make the structure strong, you need to use metal gaskets, but not so often. Next, you need to deal with the mechanism for lifting and controlling the gate. Any measuring processes should be repeated twice so that the permissible error is not violated. When the sectional doors are assembled, their performance is checked in their place. You need to do this several times. The time spent on this work varies. It is better to do this with an assistant. Most often, two hours are enough.
Sometimes it also happens that at the top or on the sides of the opening there is not enough space for the entire structure. How to be in such a situation? It is not always worth abandoning the modern design. If the lintel is small, then a false panel is quite suitable. It is made of a material that is not spent on the gate itself, but is mounted in the opening to the carrier beam. It turns out that the height of the gate becomes smaller, and the problem is automatically solved. It is not uncommon when there is little not only at the top, but also in the side parts.
Most often, standard car garages do not suffer from such problems. But iron always have some minus. How to proceed in this case? To do this, a new frame is being made, namely, a profiled pipe of the desired section is welded around the perimeter. It depends on how much space you need on the sides and top. After it is worth spendingwarming. Some install gates around the perimeter, but this is uneconomical.
Conclusion
So, we found out how do-it-yourself sectional doors are installed. It turns out that there is a way out of any situation. To independently install such a gate in a garage or any other room, you should carefully study the instructions and useful tips. What the manufacturer says is accepted without change. Only in such a situation it will be possible to avoid any problems in the process of using automatic sectional doors.
