"Neomid 440" is known today to consumers as a product for external use, which is intended to protect wood of different species from rotting, damage by wood-staining fungi, as well as various kinds of destructive effects. If you cover the surface with this composition, then it will not be invaded by wood-boring insects, mosses, algae and lichens will not form on the base. At the same time, the action of the composition lasts up to 20 years and more if the surface is covered with a film-forming agent. You can use this mixture as a protective impregnation for processing:
- wood beams;
- support bars;
- sten;
- window and door blocks;
- overlap;
- lag;
- rafter systems;
- fences.
Positive feedback
"Neomid 440" is known to consumers in the form of a composition that can prevent wood damage. According to buyers, with the help of this mixture, it is possible to stop the processes of destruction by biological agents that have already begun. The mixture reduces the degree of cracking of the ends of sawn timber,ensuring uniform shrinkage of buildings. Users also emphasize that this composition can be used as a primer antiseptic for further application of paints and varnishes. The mixture is not able to change the structure of wood, among other things, it does not interfere with processing, painting and gluing.
Feedback on application
"Neomid 440" has a fairly wide area of use. Consumers in their reviews claim that it can be used as a protective impregnation for surface treatment inside and out. According to users, the composition is excellent on wood structures for various purposes.
Instructions for use: surface preparation
Before Neomid 440 is applied, it is necessary to prepare the surface, protecting it in those areas where the composition should not be applied. The surface before using the drug is cleaned of resin, old paint, dirt and dust. If the surface is already affected and has acquired a bluish tint, then at the first stage you should use bleach, it may be the composition of the same manufacturer. With it, you can disinfect the surface and give the wood a natural shade. Work must be carried out under special conditions, which are expressed in a limited ambient temperature. You should not start work if the thermometer drops below +5 ° С.
Preparing the solution
Neomid 440 antiseptic is commercially available in the form of a concentrated solution, the mixture must be shaken before use, and then diluted with water in a ratio of 1 to 19. During the dilution process, you should get an emulsion that has the color of coffee with milk. The concentration can be increased up to 1:15, this is acceptable when the storage of wood before or after processing will be carried out at a relative humidity exceeding 80%.
Consumption of solution and method of application
"Neomid 440", the instructions for using which will allow you to avoid mistakes, will be spent in the amount of 100 to 200 grams per square meter. Wood can be processed in one of two ways. The first involves the use of a roller or brush, as well as a spray device, while the second involves dipping the material into the emulsion.
In the first case, the mixture should be applied to the surface as evenly as possible. If a brush is used, it must have synthetic bristles. If you decide to use immersion technology, then you can use a container made of stainless steel or plastic. The time during which the material must be kept in the emulsion should not be less than 2 minutes.
"Neomid 440", reviews of which are only the most positive, can be applied by immersing elements in an emulsion. This method is most effective in industrial environments where large quantities of lumber need to be disinfected.
The work must be carried out intensivelyventilated areas or outdoors. After treatment, wood should be protected from water and precipitation, these conditions must be observed during the entire drying phase. The first day, processed products should be stored at a temperature ranging from 16 to 20 ° C, while the relative humidity of the air should be within 60%.
For reference
If you decide to use Neomid 440 in your work, reviews of which you could read above, then you should know that after application, the composition can change the tone of the wood, this is due to the breed and variety. Do not be afraid, because within two weeks the natural shade will return to the material.
What else you need to know about Neomid 440 antiseptic
The consumption of the emulsion may vary depending on the characteristics of the wood, its maximum value is 350 grams per square meter. Judging by the reviews, it is necessary to apply the composition in a larger amount to the wood that will be stored in conditions characterized by high humidity. You can use the mixture not only outside, but also indoors.
People who have used this tool write in reviews that the final shade of wood remains pristine. The term of protection can reach 25 years. It is necessary to store "Neomid 440" at a temperature ranging from +5 to +30 °C. The mixture withstands 5 cycles of freezing and thawing. The concentrate can be stored for 12 months, but the diluted ready-made solution can be stored for 14 days. Characterizing the antiseptic "Neomid 440", consumer reviews also speak ofenvironmental safety means. Its application is carried out in several layers, their number can vary from 2 to 3. You can buy products in plastic canisters from 1 to 30 liters. As an intermediate value of the volume, packing of 5 liters is offered.
Conclusion
Customer reviews are advised to remember that when preparing the Neomid 440 working solution, the master should use personal protective equipment, namely: gloves, goggles and protective clothing. If the mixture gets on the skin or in the eyes, they must be washed with plenty of running water. If required, a doctor should be consulted. Formulated with water, processing aids and a synergistic blend of biocides.
