Any repair work starts from the ceiling, otherwise you can ruin the new floor or wall covering. Previously, whitewash was the only option, but now hardware stores offer a variety of materials to complement the interior.
One of the most common coating methods is the use of acrylate paint with the addition of a ceiling plinth. But before starting work, it is worth understanding all the features of the material and the actions performed.
Colouring must be performed in the prescribed sequence and in accordance with the rules. Otherwise, you can be very disappointed in the result. Careful preparation of a surface for uniform drawing of material is required. Of particular importance is the selection of colors, in some cases it is possible to divide the room into different zones with their own functionality.
Dignity
Acrylate dispersion paint suitable for allsurfaces, including plastic, metal and concrete. It belongs to the category of polymer formulations, features low toxicity, no odor, high water solubility and convenient dispersion form.
After drying, the surface has high strength and glossy sheen. Among the advantages of use, it is worth noting the resistance to the influence of alkaline compounds and abrasion, as well as fire resistance. Acrylate paint is also suitable for outdoor use.
Before, there was not much variety in the design of the ceiling. Despite the appearance of many options, now the white color is still relevant, while the paint allows you to effortlessly give a new shade. To do this, it is simply mixed with a suitable color and applied to the surface. Also on the positive side is the long-term preservation of the original shade.
How to choose
There are many different types of paint that are used on all surfaces. Before purchasing, you need to pay attention to the attached instructions, which contain information on the application.
- Even white acrylate paint is presented in various shades. The required amount of material should be made by one manufacturer, this will avoid mismatching tones.
- The cost of painting the ceiling is small, while the matte version requires more than the glossy one. The number of layers is set in advance, at the stage of drawing up a repair plan.
- When choosing matte or glossycoating the latter is preferred when used in a room with high humidity.
Application
Acrylate paint can be used on wood, concrete and other types of surfaces. One of the qualities that ensured widespread distribution was the ability to work in cold climatic conditions. The composition of the material contains a concentrated pigment, preservatives designed to prevent oxidative processes, various dispersions, solvents and water. It is also possible to add elements that improve the characteristics of the resulting coating.
This material differs from acrylic in the presence of binders. The latter has no impurities and contains concentrated elements. The cost of acrylate paint is lower due to the addition of styrene or latex dispersions.
Features
One of the most common is the water-based composition, which is a quality material, despite the lower price category. Due to the presence of latex, acrylate paint acquires a distinctive elasticity, while high water-resistant characteristics allow you not to worry about the safety of the painted ceiling when it is washed. It takes about 3-4 hours for the water-based composition to dry.
Wood-based surfaces are susceptible to moisture, wind, sunlight, as well as drying out and rotting, so they require appropriate protection. The materials used mustprovide reliable coverage that prevents the damaging effects of environmental conditions. Acrylate paint is easy to mix and apply, making it possible to obtain a variety of shades.
Preparation for work
To prevent damage to the floor and surrounding furniture, they must be covered with a film before painting.
Preparation in progress in the following sequence:
- Removal of old coating and dust from the surface of the ceiling. To do this, a roller or brush dipped in water can be used. Detergent added to a container of water will get rid of dirt on a matte or glossy surface.
- Cracks are prepared with a spatula for subsequent processing with putty.
- A suitable primer is applied to the surface.
What you need to know
The ease of work and the final result directly depend on how competently the acrylate paint is prepared. It is necessary to follow the instructions contained in the instructions. Whether it is necessary to add water is indicated on the can with the material, while the amount of water, if necessary, should be no more than 10%.
When choosing a tool, the best option would be a roller or a brush. The roller is more suitable for work with large surfaces. Painting a small ceiling can be done with a brush.
Using a roller
Depending on the size of the room, a roller is selected for application. It must be completely saturated with paint when immersed.into her. For uniform distribution, the tool must be rolled over a piece of old material or a special part located on the tray. Following this rule will ensure even coverage and avoid stains and streaks.
Acrylate paint, exterior or interior, is first applied in large quantities, which is subsequently distributed over the entire surface. The direction of the strokes should be crossed to each other, so the composition will form a more uniform layer, without tool marks and streaks.
Dyeing process
Work should always start from the corners. To simplify the process, a brush can be used. The best option would be to apply paint in one motion, this will ensure that there are no areas of different shades on the ceiling. In this case, the same direction of movement must be observed. The next layer is applied with the help of strokes, reverse in relation to the first. Subsequently, the coating is smoothed to prevent streaks.
Also, before applying the second layer, you need to inspect the surface for defects. Unpainted areas should be corrected immediately. It is highly undesirable to use a thick consistency for painting, since the liquid composition will eliminate the existing imperfections by blurring and then supplementing the first layer. The application of each of them is possible only after the surface of the previous one is completely dry.
Acrylate paint is used for any type of exterior work except exteriorwindow elements and floor surfaces. When applied to wooden structures, it allows the material to “breathe”, which ensures the preservation of a normal microclimate in the house. It is worth noting the rare use of a water-based option for staining in one layer. To improve performance, 2-3 application steps are performed.
