Each living area has a bath or toilet. The door, both from the inside and from the outside, should perfectly match the design of the room. An important factor on which the service life of the product depends is the material of manufacture. There are also rooms where the door leaf is not quite a standard opening, so you have to shorten or reduce the width of the door. How to do it right?
Views
Many are wondering what doors to install in the bathroom or toilet, as well as what types of these products. They can be classified according to their design.
So, classic swing doors made of any material are still popular and relevant. In addition, they do not require additional installation time, since the hinges with which they are attached to the door leaf are pre-installed. Among the shortcomings can be noted the inconvenience of use, especially in a small room. In this case, you need to choose products that do not open inside the bathroom or toilet, butout.
There are also products that save space. These include sliding or sliding doors. Such door leafs operate silently and do not have a threshold, which is safer for residents. In addition, the dimensions of the doors to the bathroom and toilet do not really matter, as they are made only to order. The only drawback is the additional cost, both in terms of time and money, for the installation of such a design.
Folding products are also a kind of door leaf. They are made of several vertical sheets that fold when opened or closed. They can open to one side or have a book layout. But with frequent use, the leather or textile tape between the vertical canvases is rubbed, and the product loses its strength. In addition, over time, there is additional noise during use, and there is no privacy effect.
There are also less popular models. These include doors with a rotary mechanism that allows the leaf to open 180 degrees, which is convenient for the elderly or those with disabilities.
Materials
There are three types of materials for the manufacture of bathroom and toilet doors: wood, plastic and glass. Each of these materials has advantages and disadvantages.
Glass analogues of door panels do not lose their original appearance when used, are not afraid of high humidity in the room and react to temperature changes. Such modelsenvironmentally friendly, soundproof, easy to maintain, available in a variety of designs or colors and suitable for any existing interior. But they will transmit light, have a lot of weight and little choice in relation to the color scheme.
Plastic bathroom doors are at the lowest price point. These products are not subject to decay processes, as they do not react to high humidity, do not deform, are light in weight and are easy to install and maintain. Such models can be presented in various shapes or colors. Often, manufacturers additionally stick special films on plastic doors that imitate the color of wood or another option. Among the minuses, one can note the impossibility of restoration during deformation.
Classic wooden doors are the most popular. Despite the fact that they are in a fairly high category, they can swell and deform under the influence of high humidity, but they are the most environmentally friendly, have a pleasant fresh aroma and a long service life. In addition, such doors can be changed in length or width if necessary, especially in the case of a non-standard doorway.
Sizes
In order to choose a door leaf that fits perfectly into the doorway, it is worth taking measurements correctly. At the same time, product standards will differ in each room.
On average, the smallest door width is 400 mm, and the largest is 1000 mm. The table shows standard sizes that will helpchoose the right door. If the standards differ significantly from the available dimensions of the door leaf, then you should use the order for the manufacture of the product to order.
| Canvas, mm | Opening, width, mm | Opening, height, mm |
| 550 x 1900 | 590 – 650 | 1950 – 2000 |
| 600 x 1900 | 640 – 700 | 1950 – 2000 |
| 600 x 2000 | 540 – 700 | 2050 – 2100 |
Color
When choosing a color scheme for a door leaf, it is worth starting not only from the already existing interior in the room, but also from the design solution of the remaining or nearby doors. Thus, as in the photo, the doors to the bathroom and toilet will fit more organically into the room. In texture, it should be a smooth and comfortable material that does not get very dirty.
The most popular colors on the market are white and natural wood. Often in products there are frosted glass inserts. Plastic doors have the largest number of different modifications in terms of color. But they are more intended for public places, rather than residential premises, as they have a number of disadvantages among other manufacturing materials, although they are inexpensive.
Design
In order to create a truly designer product from a simple door to the bathroom or toilet, you can use all kinds of vinyl stickers, productsmade of polyurethane, which creates additional volume and relief on the door. Wooden patterns look good on wooden versions.
The most modern high-tech method is to hide the door leaf, that is, to paint it in the same tone as the wall. This creates the illusion of integrity, since it is not immediately possible to see the door itself. Design is a flight of fancy for any inhabitant of the room, you can also use the services of specialists or professionals who will help make all your wishes come true.
Selection Tips
When choosing, you must first decide on the color that matches the interior of the room, modification, as well as the size of the doors to the toilet or bathroom. If the doorway is a non-standard size, then you should pay attention to the manufacture of individual models or choose the material of manufacture that is suitable for further modification of the door leaf if necessary.
You should also consider the following points when choosing: sound insulation, non-susceptibility to increased moisture, which is specific to this room. Doors should not be afraid of dampness or fungus, and should not deform or swell when used.
Additionally, it is worth looking at not only the classic swing models, but also sliding ones, which are becoming more popular every year due to their space savings. It is also worth choosing a manufacturer that is time-tested and has all quality certificates for itsproducts.
Installation features
When installing doors to the bathroom and toilet, you need to leave a small gap between the door leaf and the opening to improve the process of ventilation of a closed and high humidity room. At the same time, it is important to choose high-quality fittings, that is, handles and hinges, since such products are subject to frequent use and increased stress.
When installing doors to a toilet or bath, it is important that the distance between the bottom of the door and the floor is at least 5 cm.
It is also important to pay attention to the doorway, if it is somewhat narrower than the door itself, then you should choose wooden analogues or a custom-made product. The inner edge of the door should be at the same level as the wall or lining in the bathroom. Otherwise, this edge will have to be filed and reduced.
What to do when the door to the bathroom and toilet is wider than the opening?
If the door is slightly wider than the doorway, it is important to pay attention to the material of manufacture. So, not every product can be sawn to reduce the width, but also not every doorway can be made wider.
Enlarging the doorway does not look very aesthetically pleasing, especially when the door to the bathroom or toilet, as well as to the kitchen or storage room, are located nearby. Such asymmetry does not look harmonious in the room.
In most cases, it is not the doorway that is modified, buta door to the bathroom and toilet, especially if the product is made of wood. Several sawing off or cutting off the product on one side will not be difficult. The place where the door leaf was reduced can be subsequently painted over with varnish to match the product itself. A plastic door cannot be reduced in size so easily, and the place where the width is reduced will always look uneven. Therefore, in this case, when the doorway is not quite standard, it is better to give preference to wooden counterparts, which are easy to modify.
How to reduce the length of the bathroom door?
With a small length of the doorway, especially in a non-standard room, only bathroom and toilet doors made of wood can be shortened. It is this material that makes it possible to modify the length of the door leaf without loss of quality and aesthetic appearance.
In most cases, it is the lower part that is sawn off, but here you need to pay attention to the latches, that is, fastening the door directly to the door leaf. They must be located correctly, on which the possibility of unhindered closing and opening of the door depends.
Famous Manufacturers
Manufacturers of doors to the bathroom and toilet quite a lot. Consider the largest manufacturers of products that, over the many years of their existence on the market, have confirmed the quality of their products and are most popular among consumers.
- Factory "Dera" (produces certified goods that meet all GOST standards, specializes in products fromwood, plastic, and models with glass inserts).
- Company "Volkhovets" (can offer a wide variety of products that will satisfy even the most sophisticated taste of the client, specializes in the manufacture of combined doors from various materials).
- Alexandria Doors Company (produces goods only from wood, provides a 3-year quality guarantee for each item to its customers).
- Factory "Sofya" (doors for bathrooms and toilets with elements of Italian design are produced here, there are moisture-resistant or dry models, as well as with glass inserts, both matte and glossy, or mirrors).
- Via Plast (Ukraine) and Rehau (Germany) specialize in plastic doors of various shapes and colors.
- Finnish company Jeld Wen (Jite) produces products for both residential premises and saunas or baths (such items are highly moisture resistant and treated with antifungal agents).
Ways to decorate the door leaf
Often the color of the door is chosen from cold tones. At the same time, some housewives prefer to decorate them additionally so that the room itself looks more cozy, comfortable and aesthetically beautiful. One of the types of door design for the bathroom and toilet is decoupage. It is also another way to express yourself creatively. For decoration, the surface of the door is treated with special means and excess dirt is removed. You can use all sorts of pictures on napkins or just printouts to put this image on the door. Herea true flight of fancy.
In addition to decoupage of doors, you can simply paint them in a different color or several shades at once if you wish, apply an image using a stencil, stick photo wallpapers or custom stickers. But it is worth remembering that the drawings look most successful and beautiful on wooden canvases. If the door is plastic or glass, it is better to give preference to all kinds of stickers or photo wallpapers, especially since the surface of such products is as smooth and even as possible.
Result
When choosing products, you need to pay attention not only to the photo of the doors to the bathroom and toilet, but also take into account many different factors from the type of product to the material and size. You also need to take into account the interior of the room itself to make it concise and complete.
The above tips and characteristics of each model will help you make the right choice, which will not only fit perfectly into the room, but also please the eye for decades.
