To be able to dry towels or other things regardless of the season, it is recommended to purchase a heated towel rail. It will be possible to avoid problems with the possibility of connecting the device to hot water supply or heating if you choose a product from a domestic manufacturer. If you carefully study the proposed recommendations, you can install, install and connect the heated towel rail yourself, which will save money and know exactly the level of quality of the work performed.
Which product is better to choose?
Russian manufacturers create models that are less susceptible to corrosion compared to European counterparts. There will be no difficulties with connecting heated towel rails, because the diameter dimensions will necessarily coincide with those standards that are traditionally defined. How to install a heated towel rail in the bathroom yourself? We will talk about this later, consider the types of systems.
Varieties of dryers
Which towel warmer is better to choose? To do this, it is important to know the varieties of products that are currently presented:
- Towel dryers that work with water. They are connected to the heating system or to the hot water supply system. These devices are beneficial to use if you want to save on utility bills.
- Models that will function with electricity. Their work does not depend on heating devices and hot water supply, and durability will be ensured due to the property of the material, which is not affected by corrosion. These devices are easy to mount to the surface of the walls. The main condition for operation is the presence of a power source. It is important to correctly connect the heated towel rail.
- Which towel warmer is better to choose? Combined type models, combining the capabilities of water and electric options, since during the heating season it will be possible to connect heating elements that heat water. To install them, you need to know how to connect a heated towel rail.
How to install
Today, consumers have the opportunity to purchase a heated towel rail in the following modification:
- With the presence of a heating element.
- Water type.
- Combined version.
Which models can be mountedhandmade?
If you study as much information as possible on how to install a heated towel rail in the bathroom yourself, you can proceed with the installation work. When you decide on a water model, you can do without assistants in this process.
If you want to connect an electric or combined heated towel rail, you will need special skills. Here it is better to take the help of a professional who is well versed in electrics. So ensure the safety of the structure.
It is important to understand that for water and combined models there are restrictions regarding the installation location. When installing in the bathroom, you can use a pipe through which hot water or heating enters. In this way, heated towel rails are placed in residential premises of a domestic sample. It is convenient to dry clothes and towels on this device.
How to properly install a heated towel rail? Electric models have features of their own internal environment, in which heating occurs with the help of a heating element. Installation of such a model takes place regardless of the place, it is only important that power is provided.
Replacing old models
How to install a new heated towel rail on old pipes? If it is necessary to replace an old device that was installed back in Soviet times, choose a type with a lower connection method, and there should be a similar diameter.
According to user reviews, the most successful choice isThis is a water heated towel rail. If you connect such a device to a hot water supply system, it can work productively throughout the year. With the ability to control the water supply, you can repair and mount such a device at any time.
If you connect a heated towel rail to the heating system, the operation of this device will be limited depending on the season. Since the opportunity to quickly dry the laundry will only be during the heating season. Inconvenience will also arise in the availability of mounting such an installation. To perform such work, you need to wait until the heating period is over. In winter, this will not work if you live in an apartment building, as such actions will lead to freezing of the riser.
If the pipes are hidden in the wall, and their outlets are only outside, you can mount it with a side connection. This process is more time consuming, but aesthetically the view of the room will be more advantageous. It is important to take care to ensure a thorough waterproofing of the joints. It will be very difficult to eliminate leaks in case of non-compliance with the sealing of the joints.
Features of connecting a heated towel rail
How to install a heated towel rail in the bathroom yourself? The simplest technology is to connect an electrical device. No complex connections here.
In order for this process to be carried out correctly, it is necessary to fix the fasteners on the walls in placeslocation of fixed outlets. At the same time, it is important to follow the safety rules.
Where in the bathroom to install a heated towel rail? It is important to ensure that water drops do not fall on the surface of the device. When installing such a device, it is recommended to observe the minimum allowable distances of 2.4 m from the place where the bath or shower is located.
Installation of an electric towel warmer can be done in the room where it will be beneficial for you. It will be necessary to implement the plan in 2 stages: dismantle the old device that was connected before and install a new one in the same place.
Preparation of materials and tools
How to install a heated towel rail in the bathroom yourself? To connect to the surface of the riser through which hot water flows, decide on the necessary materials and tools with which the device will be connected to the heating system or hot water supply system.
Mounting the heated towel rail to the wall can be done by yourself. To successfully install and connect the device correctly, you must have:
- Directly the product of the heated towel rail, the diameter of which corresponds to the size of the pipe in the system.
- Brackets to fix the structure to the wall.
- Varieties of couplings and fittings.
- Drills and dowels to attach brackets.
- Knife.
- Pipes with a diameter of 23-32 mm.
- 2 or 3 balltaps.
- A machine used to weld pipes.
- Adjustable wrench.
- Tees.
To work with the electrical version of the device, the proposed list of tools and materials is not required, it will be necessary to purchase the device of the heated towel rail itself, mounting brackets, a set of drills and dowels, with which the device will be fixed to the wall surface.
How to dismantle the old device?
For the correct connection of the heated towel rail, the dimensions of which may differ from the previous version, you must start by dismantling the device that was installed earlier. First, turn off the water supply. If we are talking about the heating system, then in order to carry out all the manipulations, it is necessary to coordinate the work with the employees of the supervising services - management companies or the housing office.
In the event that the heated towel rail is connected to the pipeline system using a threaded connection, unscrew them and remove the heated towel rail from the fasteners. If you work with such types of devices that are welded to pipes, you must use a grinder. Leave part of the pipe and subsequently cut a new thread in this area.
The algorithm for dismantling the old heated towel rail consists in sequentially performing the following steps:
- Closing the pipes of the water supply system.
- Unscrew the threaded type connections.
- Usinga tool such as a grinder, only if you need to remove the heated towel rail, which was previously welded to the pipe. There are also situations when, over time, the thread sticks, and it becomes impossible to unscrew it.
When planning to connect a heated towel rail during repairs, put a number of marks on the wall that will indicate the location of the specific installation of the device. To successfully bring the pipes, it is necessary to punch the channels. After this procedure has been completed, proceed to the next steps.
When dismantling the old device, it is important to consider that the length of the pipes that remain must be such as to cut a new thread.
How to mount grains (bypasses)?
The bypass is a jumper pipe that is needed to install the ball valve. It is necessary to ensure the circulation of water through the system. After all, there are situations when there is a need to turn off the heated towel rail.
The installed faucet supplies or shuts off water, and then redirects through the bypass. If you know how to connect an electric towel warmer, you won't need to install a device such as a bypass.
Did you decide to install a bypass? Select a pipe from the same materials that were used in the manufacture of the system. One of the best options would be to choose stainless steel, which is considered durable, resistant to interactions with moisture, and has a strong structure.
What are bypasses
When a bypass is installed, ball valves are initially installed. Whenthe absence of threads on the pipes, it is necessary to cut it.
In the places of entry and exit from the coil of the heated towel rail, the dimensions of which can be chosen for every taste, it is necessary to install one tap each. It is mandatory to ensure a high-quality tight connection so that in the future you will not be bothered by the appearance of leaks.
Without installing a bypass, the system will be able to function, but this part will help in an emergency if, for example, there are leaks. Then it will be possible to ensure the shutdown of water in the riser. At the same time, there will be no hot water supply until the end of the repair work.
This option is not very convenient. When a towel warmer is connected to a central heating or water supply, this is a real problem.
How to mount a heated towel rail?
How to install a heated towel rail in the bathroom yourself? Stock up on a set of fittings in advance to connect the device and pipes. There are varieties of straight or corner mounts. Welding is used to connect fittings and pipes.
Description of the algorithm of actions is:
- Turn off the water supply.
- If you live in an apartment, coordinate the work with the supervising organizations.
- Install three faucets at the inlet and outlet areas where the heated towel rail coil is located. For another faucet, a bypass jumper is suitable. Later, you can easily change and repair such a structure.
- How to install a water heated towel rail in the bathroom? To do this, it is necessary to ensure that the maximum permissible distance from the wall cladding is maintained.to the device. With a pipe diameter of 23 mm, it is necessary to withstand 50 mm, up to 23 mm, the gap dimensions are 35 mm.
- Connect the appliance to the pipes to which the fitting is welded. It is better to ensure the use of linen winding to seal the place where the connection was made. With careful work, the thread will not be damaged after tightening it
- Check the results, see how tight the connection is. This is easy to do on your own if you supply water to the system. If the work was done correctly, there will be no leaks.
Towel warmer installation methods
How to install a towel warmer "ladder" with a bottom connection? First you need to know that there are several ways to connect:
- diagonal;
- universal;
- side.
For a heated towel rail "ladder", the possibility of water entering from above is allowed. For normal operation, it is important that during the installation process there are no bends, rings and arcs, which will lead to air accumulation.
Due to uneven water drainage, blockage of pipes and air lock may occur, which can lead to a complete disruption of circulation. Fittings that have very narrow gaps can also contribute to this.
The Nika Laris water heated towel rail is made of durable stainless steel, the grade of which is AISI 304.
The device is designed to heat the bathroom, dry moist air,decorating the interior and drying towels. The correct functioning of the product, subject to proper connection to the hot water supply system, will not require spending money on electricity.
Reliable water heated towel rails use industrial water as a liquid. In addition, oil or antifreeze may be used.
To ensure the normal operation of the devices, the coolant pressure should be within 1.5 MPa at a temperature of 100 °C.
Towel dryer "Nika" is made in accordance with the requirements of domestic GOST. This is a reliable and durable model. You can fix the heated towel rail to the wall yourself.
Summarize
A process such as installing a heated towel rail can be done independently. It is important to study the range of products offered on the construction market and choose the best one for your premises.
It is recommended to purchase domestic heated towel rails, as they will fit exactly in size, especially if you decide to install such a design in conjunction with old pipes. Device sizes vary. But most often they choose the same "ladder" with parameters of 100 x 60 or 60 x 60 cm. On average, the height of heated towel rails fluctuates around 50-120 cm, and the width is 40-60 cm.
You can choose the option of electric or water towel dryer. In the first case, it will be necessary to additionally consume electricity, and the help of an electrician is also desirable to connect the system.
If you connect the device to the heating system, it willwill be heated only during the heating season. In addition, in case of problems with such a heated towel rail, you will need to turn off the heating throughout the house. This is quite problematic for residents of apartment buildings. Therefore, you need to think about which option to choose.
Which towel warmer to install, only you can decide, based on the recommendations of this article.
