The heated towel rail plays an important role in the apartment, it is convenient to dry clothes in the bathroom on it, and the bathroom is also heated. Due to the constant maintenance of heat in the room, dampness is not diluted and such an unpleasant thing as a fungus does not appear. The bathroom is dehumidified. Nowadays, people often make repairs and combine a bathroom with a toilet. To combine, it is necessary to transfer the heated towel rail from one wall to another. How to do it and what are the nuances? Let's try to understand our today's article.
What preparations should be made before transferring the heated towel rail?
The easiest way to change the location of the electric models of the heated towel rail. They are installed by hand and do not require coordination with special supervisory authorities. With this type of device, no additional investment is needed. Even a beginner can handle the installation of this device. The transfer of the heated towel rail takes placeas follows: the desired device is removed from the wall and mounted on another. In some cases, you have to work on sockets and wiring.
With water appliances, the situation is much more complicated. It is necessary to coordinate the transfer of the heated towel rail with the authorities for the supervision of the state of communications in residential buildings. The state of communications inside the housing is assessed, after which permission is given for the installation of devices. The homeowner takes responsibility for changing the settings in the overall home system.
What to consider when choosing new equipment?
When choosing a new appliance and transferring the heated towel rail to another wall, it is important to understand that there should not be additional loads on the thermal system. The device must have a quality certificate. It must be selected by power, based on the area of \u200b\u200bthe bathroom. Specialists install a heated towel rail, avoiding the creation of a hydraulic backwater. Installers also do not make an air lock. The work must be carried out only by a qualified tradesman or independently, but under the supervision of a specialist.
Where is the best place for a heated towel rail?
Having received an agreement to transfer the heated towel rail to another wall, people think about how best to position it. The ideal option is to install equipment above the washing machine. If a front-loading machine is installed, its lid must not reach the heated towel rail when opened. The minimum distance between them should be approximately 60 centimeters.
Additional requirements
There are additional requirements for the installation of this equipment according to SNiP:
- The device must be fixed at a height of at least 95 centimeters. The maximum height for a heated towel rail will be 170 centimeters. Human growth is taken into account, it should be convenient for residents of the apartment to use this unit.
- If people choose U-piece, then the mounting height will be 110cm. When the M-shaped heating element is preferred, it is mounted 90 centimeters from the floor.
- Many choose a ladder-type heated towel rail. It is mounted in such a way that a person can hang clothes on the top bar.
If you follow all the recommendations for the selection and installation of the required equipment, then it will be convenient for all residents of the apartment to use.
What are the nuances
Transferring a heated towel rail to another wall is carried out according to the rules:
- You need to choose the shape of the device, as well as its design, so that they fit the side of the intended location of the element. It is necessary to take into account how the communications go, to check whether the heated towel rail will fit on the selected wall.
- The selected device must have a bypass. It is a jumper with a crane. This element is necessary to maintain the he alth of the heating system at home in case of an accident.
- Length andthe cross section of the device must correspond to the diameter of the pipe that is installed in the house.
- When installing, it must be observed that there are no sudden changes in levels. Otherwise, there is a risk of an air lock. Usually the pipeline is laid horizontally and then installation work is carried out.
- The important point is which pipes are used in the work. They must be heating and cope with high pressure. Such pipes heat up quickly and keep a certain temperature regime for a long time.
Requires special tools to work. These include a grinder, wrenches, and screwdrivers. With these tools available, the operation can begin.
How do I get started on transferring a heated towel rail?
The transfer can begin when the person has made sure that the hot water supply is turned off. Usually they ask the plumber to block the riser in the basement of the house by a certain time. It is advisable to inform the neighbors about your actions, you can place an announcement at the entrance. Indicate in it when and for what period of time the water supply will be turned off.
What stages of work can be identified?
The transfer of the heated towel rail in the bathroom is carried out in stages. The following sequence of actions is distinguished:
- Old equipment is being removed. To do this, you need a grinder, it removes old appliances. It is important to cut the pipe correctly, as new equipment will have to be mounted on the remainder.
- Producedpressure testing of communications, a bypass with a crane is installed.
- Pipeline is being laid. The work goes from the new heated towel rail to the riser. When the distance to the new heated towel rail increases, then the hydraulic calculations are carried out again. Then it becomes possible to immediately position the pipe correctly. If there are errors during the installation process, the element will not warm up and maintain a certain temperature level.
- Some hide the pipeline under special materials, erect a false wall. This method of covering the pipe takes a long time.
- Before attaching the heated towel rail, mark its future location with a pencil. After that, you can connect the required element to the pipeline.
Be sure to check if the heating device works at the new location. If everything is in working order, then it is possible, if necessary, to carry out repairs in the bathroom.
Possible installation difficulties
To people who are not familiar with the installation of elements of this type, it seems that every beginner will cope with such a task. This statement would be clearly misleading. Few people think that the transfer of a heated towel rail is associated with a change in pressure in the system. In the future, the device will operate under high water pressure, so all inaccuracies during installation will result in big problems during the operation of the element. That is why it is better to invite competent specialists to install. They will carry out the transfer of the heated towel rail in the shortest possible time. Systemwill work flawlessly, there will be no risk of flooding the neighbors.
Difficulties may also arise at the stage of removing the heating element from its previous location on the wall. You can damage the heated towel rail at the joints. Therefore, when working, you should be extremely careful.
So, we figured out how to transfer the heated towel rail to another wall. Now there should be no problem installing it.
