The issue of saving resources is always on the agenda. It doesn’t matter if it concerns heat loss, electricity consumption or finances. Modern science allows you to use the latest technologies in the economy and in everyday life. Installing meters for water and heat consumption makes it possible not only to regulate the climate in the apartment, but also save money. And additional heat sources allow you not to depend on central heating and regulate the desired temperature in the apartment yourself. Now there is no need to increase the number of batteries in the room, it is enough to change the stereotype of thinking.
Today, there are several technologies that achieve the desired temperature. First of all, these are heated floors that use hot water. You can connect them to batteries, but it is better to have your own heating device for this purpose. If you decide to heat a room with a water floor, then you must first carry out a series of works. Pipes of small diameter are laid on the subfloor, which are then poured with a screed. From above they are covered with any coating.
Hot water underfloor heating allows you to use floor tiles, laminate, linoleum andeven parquet. It is only necessary when choosing a finishing material to pay attention to its characteristics, so that later the floors do not lose their attractiveness. If you take cheap parquet, then it can crack from exposure to heat changes. This also applies to the rest of the coverage. It is necessary to choose any material taking into account temperature indicators.
Laying pipes and pouring the screed is quite laborious work. Electric underfloor heating will simplify this procedure. They are sold in rolls and do not require any additional tie. The heating mat is ready for use. It is easy to install and is suitable for any flooring you like.
In addition to water and electric, there is also underfloor heating, which uses nanotechnology. The infrared rays generated by the polymer used in this method heat the floor without overheating. This technology is also good because it has a very beneficial effect on a person and his body.
Each option is interesting in certain conditions. But they have an overall positive figure that makes underfloor heating stand out. Heat is created on the entire perimeter, there is no overheating of individual elements. The air warms up at the floor and rises. The temperature is the same at every point in the room. You can do all the work yourself. But it is better to involve specialists in this. They will help not only to correctly calculate the amount of material needed, but also tell you what is best.use for your apartment. You can choose one type of underfloor heating, but if desired, they can be combined. In the bathroom, for example, use a water floor, and in the kitchen and hallway, install electric heated floors.
In addition to saving money and a comfortable temperature in the apartment, underfloor heating allows you to get a lot of pleasant sensations from walking barefoot.
