Gas meters are preferred to be installed in our time not only by residents of private houses, but also by owners of city apartments. This device in many cases allows you to save the family budget by reducing the payment for the consumption of blue fuel. How to install it correctly, how to take and transmit gas meter readings to the supplier?
What is a meter?
At the moment there is just a huge number of a wide variety of gas meters.
However, ordinary, not too complex structural devices are installed in the apartments. This equipment is chosen depending on how much gas the family consumes approximately and what gas appliances are available in the home. Indeed, in apartments, not only a stove, but also a column can be mounted. First of all, you need to look at the technical data sheets of these devices and find out the amount of blue fuel they use per hour. Then the scores are added up. Thus, it is easy to find out what bandwidthability appliance must be purchased.
How is a gas meter selected and installed?
In order to get the correct readings of the gas meter, this equipment must be installed correctly. First of all, you should know that only a licensed specialist can install this device. Of course, you need to choose the right device itself. Only a high-quality counter can differ in accuracy. Therefore, it is worth buying equipment only from trusted manufacturers. Most likely, when contacting the city gas service, you will be offered to buy a meter in their own store.
How to read the gas meter correctly?
According to the rules approved by the Government, the consumer is obliged to independently notify the supplier of the consumed gas. As for the terms, they are indicated in the contract. Usually you have to take readings once a month. At the same time, it is worth having a special notebook, where to enter the information issued by the device for each first number. You need to write down only five digits before the decimal point. To find out the amount of gas consumed exactly for a month, you will need to subtract the readings of the previous month from the received date. Further, everything is simple. The resulting cubic meters are multiplied by the cost of one in your area.
How to submit readings to a supplier
In order to transfer the gas meter readings to the supplier, you need to call the phone number that will be given to you when ordering the installation of the meter.
Hisalso worth writing in a notebook. The call is usually answered by an answering machine. In some cities, gas consumers are given the opportunity to transmit readings via the Internet. In this case, you just need to go to your personal account on the company's website.
Sometimes the question of how to read the gas meter is not before the owner of the apartment. In some cities, representatives of the company come once a month to the consumer's house to obtain information. In this case, the client must provide the specialist with access to the apartment. Before signing the statement, it is necessary to check whether the gasman indicated the numbers from the device in it correctly.
What not to do
Some apartment owners, in order to reduce gas costs, begin to think about how to stop the meter or unscrew it. During installation, the device must be sealed. This procedure is carried out by the installer, which is documented. In addition, the device itself is sealed already at the factory.
However, sometimes gas meter owners find ways to bypass such fairly strict controls. For example, you can use a strong magnet. Also, sometimes apartment owners adjust the cuffs at the pipe inlet in a certain way even before installing the meter. Of course, it is absolutely not worth it to engage in such frauds. Sooner or later, these actions will be noticed. And for them a rather large fine is provided.
Thus, we answered the question of how to receive and take readings of the gas meter and how to transmit them. Of course, first of all, this equipmentshould be properly selected and installed.
