How to sheathe a garage inside: basic materials and requirements

Table of contents:

How to sheathe a garage inside: basic materials and requirements
How to sheathe a garage inside: basic materials and requirements

Video: How to sheathe a garage inside: basic materials and requirements

Video: How to sheathe a garage inside: basic materials and requirements
Video: Building Better Walls | 5 Sheathing Pro Tips 2024, March
Anonim

There is a wide range of materials that you should pay attention to when looking for an answer to the question of how to sheathe a garage inside. It is necessary to focus on technical characteristics, namely: durability, strength, aesthetic qualities. You should choose the option that suits your particular garage.

What are the requirements for finishing materials?

How to sheathe a garage inside cheaply and beautifully
How to sheathe a garage inside cheaply and beautifully

On the modern construction market there is a large selection of finishing materials, different in cost and technical characteristics. When choosing how to sheathe the garage inside, you should pay attention to the materials that correspond to the specific use of this building.

The following requirements must be met:

  1. Resistant to high loads. It is important that the wall and floor coverings do not deform either from impact or from heavy loads.
  2. Resistant to chemicals. The garage is used not only as a place to park the car, but also to store various combustible materials, substances andcar service tools. When carrying out repair work in the garage, acid, lubricants, gasoline fall on the surrounding surfaces, polluting them. It is important that after cleaning the materials remain unchanged. It is on this criterion that you need to focus on when compiling a list of materials, the better to sheathe the garage inside.
  3. Fire safety. During repair work, as well as during regular maintenance of the car, substances that can quickly ignite are used. To ensure safety, fire-resistant cladding must be used.
  4. Resistant to temperature effects. This aspect needs to be paid attention if you do not plan to carry out heating in the room. Under this condition, it is important to consider how to sheathe the garage inside so that the effect of the repair is preserved for a long time.
  5. No maintenance issues. When working in the garage, significant pollution often appears. In order not to experience difficulties in the care of facing surfaces, it is necessary to make sure that these materials consist of substances with low absorbency. It is important that the surface is not only quickly wiped off, but also does not absorb foreign odors.
  6. Possibility of quick cosmetic repairs. When choosing how to sheathe the walls of the garage inside, consider updating the surface with paintwork.

PVC paneling

PVC panels
PVC panels

With the use of PVC panels, you can decorate a garage of any size. To the advantages of materials than cheapevery car owner can sheathe the walls of the garage inside, the following aspects include:

  1. Affordability.
  2. High moisture resistance, as well as no need for additional processing, such as coloring, decorating.
  3. Easy installation process and subsequent easy surface care.
  4. Relatively small weight of each sheet. When using PVC panels, there is no additional load on frames, hinges and other important structural elements of the building.
  5. The need to use a frame allows not only to fasten the panels quickly and securely, but also to insulate the building at the same time, for example, using mineral wool.
  6. Quick and inexpensive repair in case of damage to the appearance or more serious damage. You can only change the part that was affected, you do not need to work with the rest of the structure.

Cons

Disadvantages of PVC panels:

  1. Relatively low mechanical strength. In the event of a sudden load, the panel may be deformed, requiring subsequent repair.
  2. Negative reaction to temperature changes. Cheap PVC boards can warp over time if the garage is not heated. To avoid changing the technical characteristics, it is necessary to choose more expensive panels designed for facade work or specifically for garage cladding.

Wooden lining

Wooden lining
Wooden lining

In the production of natural wooden lining in most casesuse pine or other coniferous trees. Such material is easily mined, it is convenient to process, and the final product is not harmful to he alth. When choosing a wooden lining, you must make sure that the material was soaked with an antiseptic before processing, and also completely dried.

The main positive qualities of wooden lining:

  1. Complete environmental safety.
  2. High service life.
  3. Most items are reasonably priced.
  4. Easy wiring diagram.
  5. High strength, resistance to temperature extremes, including severe frost.
  6. No breakage even when exposed to mechanical stress.
  7. Natural material looks attractive, you can choose from a large list of natural shades.

Some features are not in favor of lining when deciding how to cheaply sheathe a garage inside:

  1. Accumulates moisture if not properly waterproofed.
  2. There is a risk of mold, and pest animals can also deform wooden lining.
  3. The risk of fire remains even after the flame retardant is applied to the surface, but is significantly reduced compared to the cases of using wooden elements without pre-treatment.
  4. Difficulties in care. Walls are difficult to clean from oil stains, which is why it is desirable to cover the lining with varnish, then foreign substances will not be absorbed.

Drywall: Should it be used for garage sheathing?

The better to sheathe the garage inside
The better to sheathe the garage inside

Sometimes drywall is called dry plaster. To finish the garage, guaranteeing reliable protection against moisture and fire, GKLVO sheets are usually chosen.

Obvious benefits of drywall:

  1. Relatively low cost.
  2. Can be used as a base for attaching other building materials.
  3. Easy installation of the product. Sheets of drywall are attached to the surface with a special solution or to the frame. The second method is used only if the installation is carried out on uneven walls or insulation is being done at the same time.
  4. No installation difficulties, minimal waste after work.
  5. Can be used as a basis for fastening other building materials. The surface must be absolutely flat, then tiles or embossed plaster can be laid on it.
  6. With the help of drywall, you can sheathe not only the walls of the garage, but also make a small partition, delimiting the main space, for example, from the utility room.
  7. Different in shape options. The choice of different sizes and textures of drywall sheets is so great that with the help of this material it is possible to veneer not only an absolutely flat, but also an arched structure.
How to sheathe a garage inside cheaply
How to sheathe a garage inside cheaply

Flaws:

  1. Not comfortable enough for a small space. If you attach drywall to the frame, the area of \u200b\u200bfree space will decrease even more.
  2. Leaving the drywall surface without additional cladding does not provide sufficient impact resistance. When facing with tiles or other materials, this disadvantage is leveled.

Wall cladding with OSB sheets

If you are wondering how to sheathe a garage inside cheaply and beautifully, please note that you can limit yourself to plywood and other materials made using wood shavings. To avoid problems during repair work and during operation, it is advisable to choose sheets marked OSP-3. This option has high strength characteristics, has moderate resistance to moisture. To make the perfect coating, it is advisable to additionally install waterproofing. OSB-4 is a more reliable option, it can act as an independent cladding. Paying attention to the photo, how to sheathe the garage inside, you can choose by carefully viewing them.

Sheathing with OSB sheets
Sheathing with OSB sheets

Benefits of SDE

The main advantages of this material:

  1. High trouble free life.
  2. Durability, temperature resistance.
  3. Protection against penetration and accumulation of moisture.
  4. Mold does not affect OSB because it contains antiseptic ingredients.

Disadvantages of SDE

Main disadvantages of garage wall cladding using OSB panels:

  1. High risk of fire.
  2. During installation and operation, the coating emits harmful substances. Contains formaldehyde, which cancause harm to he alth, but with proper ventilation, the risk factor does not exceed the norm.

Ceiling trim

Usually, the roof in the garage has a flat shape. This is the most economical and easy-to-build option, however, it provides for the possibility of leakage, since water can stagnate during heavy rains. The decorative lining of the ceiling in the garage is installed after reliable waterproofing. In most cases, plaster is applied to the surface, then painted. PVC or MDF panels are also considered a good option. These options allow not only finishing, but also at the same time building insulation of the structure, hiding communication systems.

Finishing the floor

How to sheathe the floor of the garage inside
How to sheathe the floor of the garage inside

The coating must be resistant to constant loads, be sure to support the weight of the machine. Most popular flooring options:

  1. Concrete floor followed by painting. Supports the weight of any car, does not collect dust, and is also wear resistant.
  2. Ceramic tiles. The original design, neat appearance is combined with high durability and easy maintenance.
  3. Bulk floor. Providing the most even surface, resistance to mechanical stress, as well as the ability to use in an unheated room.
  4. Wooden structure.

If you are interested in how to sheathe a garage inside, give preference to reliable and high-strength materials. The most popular and resistant toload options that will not require repairs for a long time.

Recommended: