During the construction of the bath, there comes a moment when you need to decide on its interior decoration. Here it is very important to choose a material that will not only be beautiful and functional, but will also be able to withstand the specific microclimate of this room. Based on this, many are wondering how to inexpensively sheathe a bathhouse inside and what qualities should the selected material have? A properly equipped steam room is the key to a comfortable and pleasant stay, which is why the finishing of all its surfaces must be approached as responsibly as possible. In this article, we will consider in detail the process of landscaping this room, starting from the choice of materials and ending with the technology of their installation.
Choosing the right material
To the question of how inexpensively sheathe a bathhouse inside, there is one correct answer - with a tree. Why exactly them? Because it is the only 100% natural material that meets all the requirements for use in rooms with high humidity and high temperatures. This finish gives the space a special aesthetics,creates a pleasant atmosphere, and most importantly, perfectly retains heat.
For those who are interested in how to sheathe a bathhouse inside, besides wood, we should mention glass-magnesium sheets. This is a new material that is made from wood chips and fiberglass with the addition of various binders.
The plates are produced in light colors and can be used in rooms with high humidity. Since this is a relatively new product, it is rarely used for bath cladding, so we will not dwell on it for a long time.
From wooden materials are actively used: block house, panels and lining. For a bath, these options are considered the most suitable.
Which wood should I choose for a bath?
When it comes to decorating walls and ceilings, it is not at all necessary to limit yourself to any one type of wood. The combination of various varieties that differ in shade will make it possible to make a more interesting and extraordinary design. But, before deciding which tree to sheathe the bath inside, you should take into account the properties and performance characteristics of each tree species.
When lining the ceiling and walls, it is better to use larch, linden, aspen and cedar. It is extremely undesirable to place pine materials in the steam room, as when heated, they emit a pungent odor into the air, which can interfere with comfortable rest.
But for finishing dressing rooms and rest rooms, this option is optimal. Pine has a beautiful texture, easy toprocessing and has a very attractive price.
It is better to sheathe a steam room and a washing room with linden and larch.
These species are able to retain their original color for a long time and practically do not heat up under the influence of high temperature.
Finishing a steam room
Only high-quality materials should be selected for finishing the surfaces of the steam room. Most often, lining is used here. For a bath, a top-class board made of hardwood is chosen.
Lamels are located in a horizontal or vertical position and are fastened with nails, adhesives or staples in a secret way. In order to ensure reliable retention of heat and steam inside the room, a layer of heat-insulating material is placed on the walls.
For this purpose can be used:
- foil;
- mineral wool;
- foam covered styrofoam;
- glassine and others
It is very important that there is air space between the lining and the insulation. This can be achieved by mounting the crate on which the facing material will be installed. The distance between the rails should be no more than 50 cm.
The finished frame and lining are covered with an antiseptic. Processing is carried out before assembly. Wall cladding starts from any corner of the room, fixing the boards on both sides, with any of the above fasteners.
Flooring: wood orceramics?
The temperature in the steam room at floor level usually does not exceed 30 degrees, so they can be made of any material. It is more important to make the correct and quick draining of water from the bath. The rough floor is covered with plank flooring, on which a polished floorboard or ceramic tile is laid.
Comparing these two coatings, it should be noted that the tile is more durable. This is due to the fact that under the influence of moisture, the wood darkens, rots and fails after a while. Ceramics, in turn, is not afraid of humidity, temperature changes and is not subject to rot and mold.
Despite this, it is very often wooden floors that are laid in the baths. This material harmonizes perfectly with the surrounding interior and is much more pleasant when touched with bare feet.
Considering how inexpensively sheathe a bath inside, it is worth dwelling in detail on the installation technology of both options.
Wooden flooring
The process of finishing the floor with wood materials is very simple. First of all, the logs are laid on which the boards are mounted. They are placed on brick columns, which are installed on the base of the floor. For a log, choose boards measuring 20 x 20 or 25 x 25. They are laid in increments of no more than 1 meter. The floor level in the steam room must be 10-15 centimeters higher than in other rooms of the bath. This is necessary so that warm air does not leave the steam room for as long as possible. For laying the finished floor, tongue-and-groove or edged material is used, at least 30 cm thick.
Before sheathing the bath inside with a board, all lining and logs must be pre-treated with an antiseptic composition. This will protect them from colonization by microorganisms and extend the life of the wooden floor.
Ceramic tile floors
For safe movement for floors, you should choose tiles with a rough surface. This will make them less slippery when in contact with water.
To lay the ceramic coating, it is necessary to make a solid concrete base. The surface must be perfectly clean, even and dry. Immediately before laying, the tiles are soaked in water for a couple of minutes. This is necessary so that it does not absorb moisture from the solution and the floor lining is of the highest quality and durable.
From the most visible corner of the room, begin laying tiles using sand-cement mortar or moisture-resistant adhesive. At the end of the work, the seams are hidden with a special moisture-resistant grout. It helps protect tiles from mold.
For more comfortable movement on the tile, you can place flooring made of wooden slats on the floor. Such designs are convenient in that they can be taken out of the steam room to dry.
Cost
To properly plan your own budget, you need to understand how much it costs to sheathe a bath inside. The final amount depends on who will perform the finishing work and how high-quality material is chosen for finishing.
If you plan to hire specialists to equip the bath, you need to be prepared to pay for their services. So, the installation of the crate is estimated from 130 rubles per m2. Facing the walls and ceiling with clapboard will cost the owner of the premises from 350-500 rubles per m2.
In the event that the walls inside the bath will be sheathed with their own hands, only the costs of purchasing lining and related materials are taken into account.
A top quality board made from basswood costs about 500-600 rubles per m2.
Larch lining will cost 250-350 rubles per m2, while material made from softwood has a price tag of 150-200 rubles m 2.
To these costs should be added the cost of fasteners, bars and thermal insulation.
Conclusion
In this article, we found out how and how to inexpensively sheathe a bath inside. In order to save money, the interior arrangement of the premises can be done independently, without resorting to the expensive help of specialists. After facing the floors, walls and ceiling, you need to take care of lighting and furniture installation. A variety of shelves and hooks will not be superfluous, on which you can put personal items and hang towels. After completing all the work, you can start bathing procedures and enjoy your vacation with family and friends.
