Many car owners do not know how to inexpensively sheathe a garage from the inside. For people who spend all their free time near the vehicle, the decoration of the room is of particular importance.
If the right materials are chosen, they help keep the garage clean, make it more comfortable and cozy, and also contribute to the careful storage of the car and all tools.
Do I need plating?
Many are interested in whether it is necessary to make a sheathing of a metal garage from the inside, like any other buildings of this type for storing vehicles. If we consider outdoor work, they will make the building look more beautiful. And the frame structure will also be protected from environmental factors. But inside the garage, nothing threatens at first glance.
In fact, interior decoration is also necessary, since the walls of the building will be protected from this side as well (from mechanical damage, moisture, dirt, etc.).
The second aspect is aesthetics. It's much more pleasant in a comfortable environmentwork. And in the garage, vehicle owners usually spend a lot of time.
Also, finishing is needed in case of insulation of the building. The material will protect such layers so that they do not lose their properties.
Requirements for materials
When choosing how to inexpensively sheathe a garage from the inside, it is necessary to take into account the specificity of such a technical structure. The cladding material must meet the following requirements:
- Strength. You need to choose a coating that is resistant to loads of various types.
- Resistant to aggressive chemicals. The garage stores a lot of combustible materials, acids and more. They pollute walls and floors.
- Fire resistance. Most vehicles are highly flammable. Fire must not be allowed to spread in the garage.
- Immunity to sudden changes in temperature. Especially important if you plan to install a heating system.
- Easy care. There is always dirt in such a room, so the walls and floor should not absorb it. In addition, you need to choose a material for lining the inside of the garage so that it is easy to clean.
- Easy to update. Ideally, materials are recommended that can be easily updated or additionally protected with paint and varnish.
When choosing materials, be sure to take into account such requirements.
PVC panels
How inexpensive to sheathe a garage from the inside, few know. However, there are many budget options available. For example, PVC sheet.
Kmaterial advantages applies:
- small cost;
- moisture resistance;
- no need for painting or other additional processing;
- easy to install and maintain;
- light weight;
- cheap to repair (you can replace one panel without removing all the others).
The disadvantages include low strength. If you hit the panel, then defects will appear. In addition, sheets are susceptible to sudden changes in temperature. Such material is suitable for garages that are not heated.
But when asked how to insulate the garage from the inside with your own hands, you can use mineral wool slabs. For this you need a frame. By the way, PVC panels are also installed either on it or directly on the wall.
Counting the number of panels is easy. It is necessary to calculate the entire length, and then divide by the width of 1 sheet. It is recommended to purchase 2-3 pieces more in case of deformation during transportation or during operation.
To fix PVC panels with glue, the latter is applied to the wall and to 1 side of the sheet. The frame method is more labor-intensive. The surface must be washed and dried. Then make a markup to set the first bar and draw vertical lines for the profiles.
First, install the side rails, and hang a rope between them. Thanks to this, the lines will be more even. Internal profiles are mounted at the corners, and the starting one is below. After that, they put the bars.
Wooden lining
Clapboard is usually made from softwood. for garageit is necessary to choose options that are impregnated with a special composition against fire. Also, the lining must be treated with antiseptics.
The advantages of the material are as follows:
- Cheap. This option is available to almost everyone.
- Large range of products, natural shades and textures.
- Sustainability. The material is safe for humans.
- Strength. Withstands loads and is durable.
- Resistant to frost.
- Easy installation. The parts have special protrusions and recesses that facilitate the process.
As for the disadvantages of wooden lining, they are as follows:
- has increased hygroscopicity;
- there is a risk of mold, pest attacks;
- may ignite, but the risk is reduced by flame retardant treatment;
- difficult to clean upholstery from stains (to fix this problem, it is recommended to varnish the surface).
Many do not understand how to sheathe a garage from the inside with clapboard. But the technology is simple. As with PVC panels, the frame is first mounted, and then the parts are installed on it.
Before installing the lining, it is necessary to treat the walls with antifungal agents so that mold does not appear.
Ceramic tiles
If you are interested in how inexpensively sheathe a garage from the inside, then ceramic tiles are perfect.
It has the following benefits:
- Strength. Withstands increased loads.
- Physical parameters. Moisture and frost resistance, fire resistance.
- Easy maintenance. It is enough to wipe ceramic tiles with a cloth. You can even use products with abrasive particles.
- Large range of products. It is best to choose clinker or porcelain stoneware for the floor and walls. Tiles should be non-slip, matte.
- Good looking. The surface will look neat and beautiful.
But there are also disadvantages:
- Quite a lot of weight. Best installed on concrete or brick walls.
- The cost of the material and its installation. It's not the cheapest (compared to others) option.
When using cement mortar, it will take more time. But you can use special glue.
You need to lay on a perfectly plastered surface. To ensure that the distance between the parts is the same, crosses are placed on each corner of the element. Many people prefer to finish the walls with tiles only up to 150 cm high, and plaster and paint everything else.
Drywall
Car owners are often interested in whether it is possible to sheathe the garage from the inside with drywall. For such purposes, it is necessary to use a material that has increased resistance to fire and moisture. The product will have a red marking, the inscription "GKLVO", and the sheets themselves are usually grayish-green.
The benefits of drywall include:
- low cost;
- light weight;
- simplicityinstallation;
- possibility to attach tiles, embossed plaster from above.
But there are also disadvantages:
- not suitable for small garages as the frame makes them shrink even more;
- low strength (but if there is a lining, the problem will disappear).
Gypsum board sheets must be fixed to the walls with special glue or on a metal frame. The latter option is used when the walls are very skewed, and also if it is planned to do insulation.
Plaster
If you need an inexpensive material for lining the garage inside, then plastering is suitable. This option is simple, fast and economical. Walls become strong, durable and fire resistant.
Plaster is best suited for concrete, brick and aerated concrete surfaces. As a basis, it is recommended to choose a cement-sand composition.
When the plaster dries, it needs to be painted. Facade options are best suited, as they have repellent properties in relation to dirt and moisture, immunity to chemical reagents. The surface is easy to clean.
The only downside is that plastering requires the right skills. Otherwise, all defects on the wall will be immediately visible, and cracks and flaking will appear at the first sharp temperature changes.
OSB Sheets
Oriented strand board is great for insulated walls. Such sheets are made from a mixture of wood and special additives. It is best to use products marked OSP-3 or 4.
The material has the following advantages:
- strength;
- resistance to sudden changes in temperature, moisture, fungus.
Cons include the following:
- material may ignite;
- harmful substances evaporate within 2-3 months from the moment the sheets are created.
Panels after installation must be primed, and then only their coloring is allowed. Instead, ceramic tiles can be glued on, which increases fire safety and the sheets are less contaminated.
Profiling
Another option for lining the garage inside is corrugated board. It is a profiled steel cast, which is coated with a polymer and paint composition.
The advantages of corrugated board include:
- will last a long time;
- off;
- mounts quickly.
As for the downsides, there is a possibility of rust. You need to install on a wooden crate - the same as with lining.
Finishing the floor, ceiling and doors
The garage roof is usually flat. To prevent water from entering the premises after precipitation, waterproofing is required. The most common finishing option is plaster and paint. A PVC panel is usually used. It is convenient, practical and cheap. In addition, it allows you to make insulation.
Garage floor could be:
- concrete painted;
- tiled;
- pouring concrete;
- wooden.
These options are simple, practical and inexpensive.
Many are interested in how to sheathe the door in the garage from the inside. The most common thermal insulation options are foam, penoizol, mineral wool, polystyrene foam. And on top they cover with any of the above listed material, which is used for wall cladding.
