Particleboard is a material that is used in construction and finishing works and is environmentally friendly. This abbreviation stands for "chipboard".
Views
There are two types of such material: polished and laminated chipboard. Their difference lies in the fact that sanded is produced without coating, and laminated is covered with melamine film.
Basic Features
When the answer to the question: "Particleboard - what is it?" is received, and its types are considered, you can proceed to the properties of this material. Its main advantage is its low cost and the ability to carry out fairly fast processing. The operational properties directly depend on the shape, density, size, as well as on the qualitative and quantitative characteristics of this material. To ensure more reliable stability of chipboard when exposed to fire, it is treated with flame retardants.
Benefits
The main advantage of this building material is considered to be fairly easy processing. If used properly, it can last for decades. High-quality chipboard - what is it? This is the materialwhich has excellent strength, high density and elasticity. Chipboards are used in construction work, as this material is quite light, economical and multifunctional. The presence of special impregnation provides high water and fire-resistant properties of the material. In addition, there are no knots, cracks, voids on the surface of the chipboard, and thanks to this, the material easily holds nails and screws.
Scope of application
Due to its reliable quality and low cost, chipboard is widely used in construction, decorative interior decoration, and furniture manufacturing. Laminated chipboard is used in the production of sets for the kitchen, bedroom, nursery, study and office. When carrying out construction work, it is taken for the production of flooring under the roof and floor coverings.
Working with chipboard
When working with this material, you need to know the properties of chipboard, what it is and its main characteristics.
Sawing chipboard must be done slowly. It is advisable to use a saw with fine teeth, then the line along which the cut is made will not crumble and break. If laminated chipboard is sawn, then adhesive tape must be glued to its surface, thereby protecting it from damage. It is necessary to drill the material smoothly, using a sharp drill, which must work at high speeds. In this case, you need to ensure that the drill is perpendicular to the surface, otherwise chipping may occur.
To remove all irregularities, use a planer andrasp. The tool must be moved in the direction from the outside to the inside. With such work, it is important to prevent chips from being pulled out - therefore, the edge will become much neater. If there is such a need, then you can use a file. Laminated chipboard does not need surface treatment, it is enough just to process the edges. The rest of the untreated surfaces can be varnished, painted or glued with a film. Before covering the surface, it is necessary to putty the plates.
In this article, the question: "DSP - what is it?" - you received a clear and detailed answer.
