As a rule, after the main repair work, builders mount skirting boards on the floor. This element performs two functions at once - aesthetic and practical. In the first case, it gives your repair, that is, the whole room, a complete and neat appearance, and in the second, it covers the junction of the floor covering and the wall. It is also worth noting that skirting boards are often mounted on the floor even if the repair is done perfectly, and such joints do not need to be hidden. This is done in order to make it easier to lay the wiring, because modern finishing rails provide a similar connector.
The basis from which each individual skirting board is made
First, consider what materials are used most often to make a similar interior element. Today you can find skirting boards made of plastic, MDF and natural wood. The first category, as a rule, includes structures through which it is easiest to pass wiring. They are strong enough, do not age, do notdeformed, and also able to serve you for a long time. As a rule, plastic skirting boards on the floor are ideally combined with linoleum, in some cases with laminate, as well as with carpet and simple floor tiles. Finishing from MDF looks more natural and expensive. Most often it is combined with a laminate, but in some cases it looks harmonious with parquet boards and linoleum. These skirting boards are easy to install, light and quite cheap.
Incomparable classics of the genre
The most durable and sought-after floor skirting boards are wooden. Their cost, of course, is much higher than for all of the above analogues, but the service life, aesthetic characteristics and environmental friendliness are all at the highest level. These skirting boards are perfectly combined with natural wood flooring, they also look harmoniously with carpet and laminate. Choosing a similar finishing element, you provide yourself with quality and reliability for many years. The main thing is to properly care for him, do not forget to varnish and make sure that direct sunlight and excessive moisture do not harm him.
How to install skirting boards on the floor
In order to understand each step of such installation work, we will divide everything into three stages and consider each of them in detail. The first thing to do is to install this building element along straight horizontal walls. The main thing is that the plinth should fit flat against the wall, without distortions and displacements. When you have everything aligned, attach itscrews, tightening them until they stop. If you mount a plastic plinth, then the junctions of the planks are closed with decorative caps. Wooden structures, as a rule, are selected clearly according to the size of the walls. The second step is positioning the inner corners. Plastic skirting boards are assembled as a constructor, so in this case, the main thing is that the two planks converge at the same height, and you connect them with a corner. Wooden structures are simply puttied and varnished. Well, the third step is similar actions, only now on the outer corners.
Note to the builder
If the walls are even, the flooring is strictly perpendicular to it, and there are no defects, then it is easy to figure out how to attach the skirting boards to the floor so that they look harmonious and beautiful. Moreover, such work turns into pleasure if it is carried out in the conditions of an ideally made repair. All that remains for you is to choose the appropriate step with which the main fasteners will be done with screws. It is important that the plinth does not bulge and does not lag behind the wall in those places where it is not attached, otherwise all its functions will be nullified.
