"Teploknauf" - insulation for roofing and walls: specifications

Table of contents:

"Teploknauf" - insulation for roofing and walls: specifications
"Teploknauf" - insulation for roofing and walls: specifications

Video: "Teploknauf" - insulation for roofing and walls: specifications

Video:
Video: Утепляем дом! Это должен знать каждый! Утеплитель для стен 2024, November
Anonim

Every consumer today is trying to save money. This applies to various areas of human life. For example, not only to the construction of your own home, but also to its operation. If you do not want to overpay for heating, then it is recommended to insulate the building. This is especially true for large cottages.

To do this, a huge variety of solutions are presented on the building materials market today. Among others, the Teploknauf insulation should be highlighted, which will be discussed below. It attracts buyers for a variety of reasons, among them the quality and low cost.

Technical specifications: "Teploknauf" for roofing

heat insulation teploknauf
heat insulation teploknauf

This material is a professional insulation that looks like rolls. The thickness is 150 mm. Thermal insulation is characterized by enhanced water-repellent effect. It is specially designed for pitched roofs.

Insulation "Teploknauf" for the roof has an elastic structure that allowsfill the roof space. This material is comfortable to use, safe, as it does not have acrylic resins, as well as phenol formaldehyde. Manufactured with a water repellent finish.

Slabs cut well, they are easy to install by surprise, they are not combustible. If you are interested in the Teploknauf insulation, you should definitely consider the technical characteristics of this material. As for the thermal insulation for the roof, it is presented in another variety - "For ROOF +". In this case, the thickness is 150 mm, while the length and width are 5500 and 1220 mm respectively.

The volume in one package is 1m3. The packing area is 6.71m2. This material is not combustible, like Teploknauf for roofing. The latter variety has a thickness of 50 mm, while the length and width are 6148 and 1220 mm, respectively. In the package, the volume is 0.75m3, while the area of the material in the package is equivalent to 15m2.

The described materials are durable, they can last more than 50 years. The materials do not have an unpleasant odor, are resistant to adverse conditions and perform their functions perfectly even if errors were made during installation. Insulation "Teploknauf" is resistant to insects and rodents.

Specifications: Cottage and Cottage Plus

heater teploknauf reviews
heater teploknauf reviews

As practice shows, "Cottage" is the most innovative and warm solution for houses, ownerswho choose the best options, but are not used to overpaying. The material is fireproof, highly elastic, and is created using the “three in one” technology.

Insulation "Teploknauf Cottage", the characteristics of which will be presented below, is suitable for protecting the house from noise and cold. The material has excellent water repellency. This type of thermal insulation can also be used for warming pitched roofs. Excellent material suitable for soundproofing rooms.

Depending on your preferences, you can choose from thermal insulation in the form of rolls or plates. "Cottage Plus" is a 100 mm insulation that is cheaper than two layers of 50 mm. Labor costs during installation and cutting of material are reduced, less scraps and debris are generated in the process.

Due to the increased elasticity, the fastening in the structure is more reliable. This is also due to the integral structure of the material. As practice shows, the thickness of the elements of building structures is usually a multiple of 100 mm.

The described insulation "Teploknauf" for roofing and walls in slabs has the following parameters: 1230x610x50 mm. The volume of material in the package is 0.6m3. As for the area in the package, it is equal to 12 m2. There are 16 tiles in the package. As for the rolled Cottage, its length, width and thickness are 6148x1220x50 mm, respectively. The volume of material in a package is 0.75m3 while the area is 15m2. Pack of 2 rolls.

Teploknauf Dom and Dom Plus

teploknauf roof insulation
teploknauf roof insulation

Insulation "Dom Teploknauf" is comfortable to use boards that are used to insulate floors and walls. Thermal insulation was created according to today's popular and already proven 3d elasticity technology. The material adheres well to structural elements and eliminates the formation of cold bridges.

Insulation "Teploknauf Dom +" is a 100-mm material that has many advantages. With the same area, it is cheaper than two layers of 50 mm. During installation and cutting, labor costs are reduced, less scrap and debris are generated. Thanks to the one-piece structure, the material is more securely attached to the structure.

Specifications: Teploknauf Dom and Dom Plus

teploknauf insulation characteristics
teploknauf insulation characteristics

Looking closer at Teploknauf Dom, you will be able to understand that its length, width and thickness are 1230 x 610 x 50 mm, respectively. One package contains 0.6m3 material. As for the thermal insulation area, in one package it is limited to 12 m2. There are 16 sheets in one package.

This material is also non-flammable, like Dom Plus. Insulation "Teploknauf Dom Plus" has the following parameters: 1230 x 610 x 100 mm. The volume of the material remains the same, but the area decreases and becomes equal to 6 m2. There are 8 sheets in one package.

Reviews about "Teploknauf Expert"

heater teploknauf house
heater teploknauf house

Before you buy a heater "Teploknauf", reviews about it are recommendedread. Teploknauf Expert is no exception. It is a thermal insulation, which is compressively clamped in the package. This allows to reduce transportation costs, which is very popular with consumers, as well as the fact that thermal insulation is convenient for installation: it does not generate dust when cutting. It is environmentally friendly and non-flammable.

Used by "Expert" for the floor, partitions, floors and attic floors. The density of the material is 20 kg/m3. When purchasing insulation "Teploknauf Expert", consumers emphasize that the price of this product is acceptable and amounts to 690 rubles. per package or 1413 rubles. for m3. There are 8 plates in one pack, it is 4.88 m2 or 0.488 m3.

Consumers emphasize that the insulation is mineral wool. It is designed for DIY chains and has enhanced heat and sound insulation properties, compact package sizes and 3d elasticity. The material is stable in construction, has an attractive cost and is a popular and affordable solution for private home builders.

This insulation is great for unused attics, soundproofing interior partitions, insulation of floors and floors. The plate is presented in two versions, the first has a thickness of 50 mm, while the second is 100 mm.

Reviews about the heater "Teploknauf Dacha"

teploknauf insulation for roofs and walls
teploknauf insulation for roofs and walls

Before you purchase the Teploknauf insulation, the characteristics of this material must be studied. Is notthe exception is the "Dacha" variety, which has excellent soundproofing and insulation characteristics. This material allows you to save on cost, but you will not lose in quality characteristics and durability.

With it, you can insulate attics, pitched roofs, unused attic superstructures, partitions, as well as floors and lay between joists. Consumers like the low weight of thermal insulation, long service life and ease of installation. This material is very popular among those who know how to count money and save without losing quality.

For one package you will have to pay 927 rubles. The packing volume is 0.9m3. For the price mentioned above, you will purchase one pack with an area of 18 m22. These are two plates. For a cubic meter you will pay 1029 rubles.

Reviews about "Teploknauf Dom Mini"

teploknauf insulation technical characteristics
teploknauf insulation technical characteristics

This material is intended for ceilings, walls, attic floors and floors. The density of the material is 11 kg/m3. You will have to pay 304 rubles for one package, which is 1013 rubles. per cubic meter. The volume of material in one package is 0.3m3. The area of the material is 6 m2. There are eight plates in one package.

This solution, according to consumers, is affordable and comfortable. It is suitable for walls and ceilings. The packaging is compact. The material in it is suitable for soundproofing and insulation of small rooms, as well as for additionalcarrying out work in the zone of individual sections. Now the buyer can purchase exactly as much thermal insulation as he needs, without overpaying for extra volume. This is very popular with consumers who want to save money.

Insulation is produced using a unique technology. The material does not contain phenol-formaldehyde resins and does not have an unpleasant odor. Consumers especially emphasize incombustibility, as well as high soundproofing properties. The material is soft to the touch and comfortable to wear.

For reference

Insulation under the Teploknauf brand is offered for sale in a wide range. If desired, you can choose the material for floors, walls, and roofs. Each offer has its own advantages, as well as cost. If there is a need, then you can insulate individual zones or sections by purchasing "Teploknauf Dom Mini", the density of which is 11 kg/m3.

Conclusion

It is noteworthy that each type of material presented above does not require the master to have special skills. Special equipment and tools are also not needed, so you can do the work yourself at minimal cost.

Recommended: