Currently, water supply in plots or country houses is not a problem. If earlier the solution was wells, buckets and the like, today rural residents and summer residents use a submersible domestic vibration pump. In the absence of centralized water supply, this is the right way to solve the problem of providing the premises with water. The vibration pump consumes little electricity and is affordable.
It is quite compact and easy to use. We can say that such a pump consists of three parts, namely: a housing, an electromagnet and a vibrator. The case contains all the components, and most often it is made of anti-corrosion materials, so it has good strength and tightness. An electromagnet is a core connected in series with two coils of copper wire with high magnetic permeability. Namely, with the help of a vibrator, which is specially separated by a rubber membrane from the electrical part, water is pumped. It includes shock absorber andpressed stem.
The vibration pump has no rubbing and rotating parts that require lubrication, as it uses valve oscillations, therefore the weight is appropriate: no more than 5 kg.
The main condition for the operation of a vibration pump is its complete immersion in water and the presence of water in it, since water provides cooling of the pump, which is necessary due to the high frequency of vibration. Lack of it can lead to its failure. It is worth paying attention also to the power cable and the cable with which the pump is immersed in water. Usually, when selling, a nylon cable is included in the kit to avoid breakdown of electrical wiring insulation.
It is worth talking about the advantages and disadvantages that a vibration pump has. Its positive qualities include a simple device, rare breakdowns, compactness and reliability. For example, the vibration pump "Kid" can work for a long time without fail in any extreme situations. Cost-effectiveness and durability make such a pump an indispensable assistant in providing water to any room in the absence of a centralized water supply. However, there are also a number of disadvantages. For example, if the well is not strengthened, over time, the constant vibration of the pump can simply destroy it. In addition, for full-fledged work, he needs a little rest, otherwise, with continuous work, he may fail. The depth of immersion, unfortunately, is also small - only 3 meters.
After studying the working principle,advantages and disadvantages that a vibration pump has, you can safely proceed to the choice of a model. But pay attention to the technical specifications, including the type of valve placement. They are of two types: upper and lower water intakes, in which the valve is located above or below, respectively. Given the fact that the lower intake is not as practical as the upper one, due to the fact that the pump is buried in the ground, as a result of vibrations, the valve clogs faster. In addition, the top valve will not overheat due to constant water cooling.
Knowing all the characteristics and capabilities, choosing the right option is not difficult.
