Recently, consumers are increasingly switching to environmentally friendly materials that do not adversely affect human he alth and are safe for the environment. Cork is one of these. With its help, various decorative coatings are laid today, and she herself has long become a facing material.
It is customary to pay special attention to the walls during repairs. The mentioned finishing material looks quite attractive. On sale you can find cork wallpaper, which has recently become a fashion trend. This finish has gained its popularity precisely because of the presence of natural ingredients in the base. The cost of the material is higher than the price of conventional wallpaper, and the pasting technology is different. However, the end result is outstanding.
Glue selection
If you are faced with the question of how to glue a 25 mm cork to the wall, then first you need to understand the main varieties of such compositions. They must provide strength and reliability, as well as guarantee a minimum level of toxicity andoptimum setting time. For example, you should not use PVA glue for this, as it will not be able to withstand the weight of the cork. Liquid nails will not work for this purpose either.
The Moment glue will be the best option. This composition is versatile and quite durable. It sets quickly, and applying the mixture is quite simple, especially on tiles. But this mixture also has its drawbacks, which are expressed in the fact that the layer can deform the cork or completely destroy it. In addition, Moment glue is toxic and quite expensive.
When novice craftsmen ask if it is possible to glue a cork on a wall, they get a positive answer. After that, they begin to look for a composition that would be ideal for such work. Manufacturers have specially developed glue "Moment cork". It is not as toxic and is resistant to frost as well as water.
Decol Vern also has a special purpose. But you must be prepared for the fact that the mixture is highly toxic, so it is better to work in a respirator. The chemically active composition should not get on the skin. The material is also flammable. It sets quickly, so the cork must be applied to the wall surface exactly the first time.
If you purchased cork wallpaper, then it is better not to use such glue, as it is better suited for tiles. The most suitable options are "Wacol" and "Cork House". These compounds are odorless, there are no solvents among the ingredients. Mixtures are environmentally friendly, dry quickly, differmoisture resistant and even suitable for wallpapering cork.
Preparation of tools
Before you glue the cork on the walls, you must study the instructions for use for the glue and the base material. But first, you should take care of the availability of a certain set of tools, among them should be highlighted:
- plummet;
- pencil;
- rags;
- spatula;
- ruler;
- construction knife;
- roller;
- comb.
Work methodology
As for the technology of work, it provides for surface preparation, marking work, gluing the material, as well as cutting off excess parts. All old finishing materials, whether it be tiles, wallpaper or decorative plaster, should first be removed from the base. If cracks have formed on the walls, they should be eliminated. The same should be done with paint that has lagged behind the surface.
If you wondered how to properly glue the cork on the walls, you should know that the base must be cleaned of dirt and dust, and also leveled with plaster. After that, you can apply a layer of primer and wait for it to dry completely. Cork is completely incompatible with gypsum, so you should not putty or cover the walls with a primer or screeds in which this material is present.
Features of preparation
A few hours before sticking the cork, you need to cut the wallpaper and spread it on a flat surface so that it aligns. Wallpaper can not be pasted deformed. While the canvas is leveling, you can mark up and prepare the glue. It is necessary to start work from the window. Marking should be carried out from the same part of the room.
When drawing lines on a surface, you must use a spirit level. If sticking is carried out according to traditional technology, when the canvases are arranged vertically, it is better to use a plumb line. As soon as the entire surface is marked, you can proceed to the preparation of the adhesive composition.
Sticking cork
If you are also among those who wondered how to glue the cork on the walls, you should familiarize yourself with the technology. The next step is to apply glue. For reliability, the layer can be distributed over the wall and canvas. But not all adhesives are recommended to be applied in two layers.
Once the mixture is applied to the surface, it is left for 20 minutes to absorb the composition. This will promote better grip. The layer of glue should not be very thin, as over time the wallpaper may move away from the wall. For reliable fixation, the canvas is pressed against the surface; for this, it is best to use a roller.
Specialist recommendations
Before you glue the cork on the walls, you should familiarize yourself withrecommendations. They say: sticking is best done end-to-end. The material should not be bent for fracture in work, as the veneer is easily covered with cracks. Corners should be given special attention, in their area the material is cut, and it is joined in this part of the room.
If waste is generated, it can be used in places where the wall surface is inaccessible to the eye. All excess is trimmed with a knife, not scissors. Before gluing the cork on the walls, the step-by-step instructions must be studied in detail. After reviewing it, you can understand that the first canvas is mounted according to the markup. Next, glue is applied to the following canvases. While the mixture is being absorbed, it is necessary to process the pasted piece with a roller.
All strips are glued end-to-end, and glue residue must be removed with a rag. Excess material must be cut off. As soon as the whole room is ready, it is left for three days to dry the material. Such wallpapers are then covered with a breathable varnish. This allows you to extend the life of the coating and protect it from damage.
Using self-adhesive wallpapers
Before you glue the cork on the walls, you need to choose the material. It can be self-adhesive, and it is sold in rolls with a length and width within 3 m and 48 cm, respectively. The surface at the first stage is prepared, it is made smooth, clean and dry. Markup is desirable.
After that, the walls are measured and the sheets are cut into individual canvases. Then a piece of wallpaper is taken, fromwhich a protective layer 3 cm wide should be separated. Using the help of a partner, you will have to attach the exposed part of the material to the surface. This must be done very carefully and carefully so that everything works out the first time.
Final works
As soon as the canvas is fixed, it is necessary to remove the protective film for a certain length in order to glue the next section. If you are wondering how to glue the cork on the walls, then you should know that after finishing the room, it will be necessary to remove air bubbles from under the material. To do this, use a rag, which should smooth the surface. If the air does not completely escape, you must use a needle to pierce the bladder. Then the surface is smoothed with a rag.
