Refrigerators are large-sized household appliances that are equipped with a sophisticated cooling system. In this regard, there are special rules for their transportation. That is why many people who have recently purchased this kind of equipment are interested in one important question: how long can you turn on the refrigerator after transportation.
But besides this, you need to take note of other equally important points. In what position can equipment be transported, how exactly to transport it in winter. We will try to find answers to all these and some other questions.
First connection
Few consumers know how to properly connect the refrigerator for the first time. Many owners turn on the equipment immediately afterhow it was delivered. And ultimately face the need for repair due to improper start. Of course, the reasons for this can be very different.
At the same time, there are certain rules that relate not only to the peculiarities of the transportation of refrigerators and other equipment, but also to their correct inclusion. And if you ignore them, then soon any device may fail.
Receiving goods
How long does it take to turn on a new refrigerator after transportation? There is no need to rush here. Otherwise, some problems cannot be avoided. This applies not only to new equipment, but also to those cases when it becomes necessary to transport it to a new location.
First of all, you need to accept the goods from the persons who delivered them. Let's say the refrigerator is new and was delivered by a transport service. In this case, you need:
- Unpack the goods to check (if there are any external damage), it does not hurt to look inside.
- All excess should be removed from the internal cavity and the refrigerator should be washed, and it is also desirable from the outside.
- Now you can arrange shelves and drawers as you wish.
Washing will not hurt in any way, but will only benefit, since dust and other contaminants could accumulate on the refrigerator while it was in a warehouse or in a store. In addition, you can get rid of the smell of plastic, which is sometimes not very pleasant.
The same applies to shelves: before placing onthem products, you should make sure they are clean. To do this, wash them in warm water with the addition of soda or a small amount of vinegar. Then rinse and wipe dry.
Proper installation
In addition to knowing when you can turn on the refrigerator after transportation, you need to understand the importance of its correct installation. What is meant by this? This equipment must be on a completely flat surface. But this is not always possible to achieve. Fortunately, all refrigerators are equipped with legs that can be adjusted to achieve a perfectly upright position.
Slight deviation back is acceptable. Thanks to this, the door will close tightly, which is very important for the full functioning of this technique. And when the refrigerator is slightly tilted back, the door can close even with a slight push, which is very convenient during operation.
For an experienced craftsman, it will not be a problem to install the refrigerator as it should be. However, you can do it yourself. Now it remains to find out when exactly you need to turn on the technique.
What threatens ignoring recommendations
What can happen if you still turn on the refrigerator immediately after delivery? In order for the compressor to work smoothly, it is necessary that the oil sinks down. The refrigerant, in turn, must be evenly distributed throughout the system. Only under such conditions is the correct operation of the device guaranteed.
And the question is: after what timeturn on the refrigerator after transportation is relevant not only for new equipment. Before starting the old device, you also need to wait some time. However, this applies to any electrical device.
Need to transport refrigerator
In life, there may be different circumstances when, at your own request or in case of emergency, you need to change your place of residence. Then you have to think about how to transport all things safe and sound.
This is especially true with regard to overall household appliances, and in particular the refrigerator. In order to deliver it to a new location without undesirable consequences, it is necessary to take into account a number of important points.
Preparing the refrigerator
When to turn on the refrigerator after transportation, if it is no longer new and has been in use? To answer this question, it is important to consider how it was prepared for transport. It is clear that the packaging is unlikely to have survived.
In this case, you can not do without the preparatory stage, which includes the following steps:
- The device itself is disconnected from the mains, and the cord is twisted and securely fixed. Otherwise, during transportation, it may be stepped on, damaged, etc.
- Products, including all other items to get. Shelves can simply be fixed securely.
- The refrigerator should be thawed and washed thoroughly, removing all moisture. Otherwise, certain problems cannot be avoided.during transportation: the ice will start to melt, water will flow.
- If the equipment has external handles, they must be removed. Cabinet and freezer doors must also be securely fastened to prevent them from opening during transport.
- Now you need to pack the technique, for which it can be wrapped with a film, overlaid with foam and placed in a box of suitable sizes.
It is better to contact one of the special companies, which has everything you need for the proper transportation of large household appliances. This will prevent damage.
Transporting the refrigerator in a standing position
There can be several opinions about how long it takes to turn on the refrigerator after transportation, as well as methods of transportation. According to the recommendations of most manufacturers, it is necessary to move large household appliances only in an upright position. This will avoid or at least minimize the risk of damage.
At the same time, due to the fact that most modern models have a rather large height, certain difficulties may arise. However, there is one acceptable trick: you can tilt the refrigerator, but so that the angle is no more than 40 °.
After preparation, the equipment should be securely fixed in the back of the truck, and a sheet of cardboard should be placed under the bottom. Also, it will not be superfluous to fit the refrigerator with special belts or impose stops and gaskets. Equipment can be transported in this positionfor any distance. It is worth noting that when transporting in a different way, which led to the breakdown of the refrigerator, the warranty service will not accept it for repair. After all, this is a clear violation of the instructions.
Transportation of equipment on its side
How long does it take to turn on the refrigerator after being transported on its side? After all, situations can develop in different ways, and it is not always possible to transport the refrigerator while standing. Then there remains the transportation in the supine position, but here it should be understood that it is almost impossible to do without the risk of damage. Due to this orientation of the device, various breakdowns can occur:
- tube breakage;
- compressor oil leak;
- clogged supercharger.
And this is not all the faults. In addition, the possibility of the formation of cracks through which refrigerant will leak over time cannot be ruled out. In addition, the very fastening of the compressor to the frame may break.
But if you follow a number of rules, then the likelihood of breakdowns can be minimized:
- Even at the preparation stage, you should pay special attention to the compressor: cover it with packing material or at least fix it well with adhesive tape.
- Do not place the refrigerator on the door or back. This is guaranteed to end in some sort of breakdown.
- Put the technique on its side, but not any. This is done only in such a way that the side to which the oil pipes exit is on top. Usually,this is the side where the hinges are fixed.
- Directly under the technique itself, put a thick cardboard sheet, foam or a blanket. After that, it is necessary to secure the refrigerator well in order to prevent its movement along the vehicle body.
When the device is transported in a horizontal position, you should warn the driver and ask him to drive as carefully as possible, avoid bumps and holes.
Features of transportation in winter
How long can I turn on the refrigerator after transportation in low temperature conditions? If it is necessary to transport the refrigerator in winter, the preparation procedure, as well as the state of the equipment itself, is no different. However, there are a number of features regarding the transfer of equipment to the car and its use in a new place.
During loading, you can not put the refrigerator on bare asph alt or snow - you should put something on it. When the equipment is already at its destination, you should wipe it with a dry cloth.
The waiting time before turning on the refrigerator in winter is even longer than usual. This is due to the fact that all the condensate has evaporated. Otherwise, damage to the contacts of the internal elements cannot be avoided.
When you can turn on the refrigerator
Now we will analyze when it is already possible to turn on the device after delivery from the store. We now know that immediately after transportation it should not be plugged into an outlet. Everything here largely depends on how the transportation was made.
If large equipment was transported in an upright position and the weather is not too cold outside, then it is enough to wait 2 hours. In winter, you will have to wait longer - up to 4-6 hours. It is necessary that the temperature is equal to room conditions, and that the condensate evaporates.
How long does it take to turn on the refrigerator after being transported in a horizontal position? In this case, you should wait an even longer period of time - at least 12 hours. There is a risk of oil leakage here, therefore, it is necessary to wait for it to return to its place.
