If for some reason there is no electricity or gas in a country house, it is recommended to purchase a wood-fired water heater. In addition, a similar household appliance is used for an outdoor shower or pool. Titanium - that's what this device is called. In addition, this is sometimes called electric heating devices. If the boiler is installed in an unheated house, then it should be cleaned for the winter. Therefore, you need to know how to drain water from titanium.
Wood-burning boiler: how it works
Even in ancient times, such a useful device was invented. After all, the lack of electricity and gas pipelines near the summer cottage is not a problem if a wood-burning water heater is installed in the house. Most often, copper or steel tanks are sold, which can also be made by hand. By the way, not only firewood, but also other combustible substances can be used as fuel, the main thing is that they are non-toxic.
Titanium consists of several constructiveitems:
- Baka.
- Mixer.
- Fireboxes.
The principle of operation of the boiler is that it is initially necessary to put firewood or coal into it. Combustible fuel will form a stream of warm air, which will pass through a special pipe installed inside the titanium. Thus, it will heat up and heat the water, and the warm liquid will rise up the boiler according to the principle of convention.
The outlet for hot water should be located at the top of the tank, and with the help of a special tee, the liquid will be distributed in the right direction through the faucet or showerhead.
If there is low pressure in the water supply system, it is recommended to purchase or make an open-type device yourself. In addition, in this case, draining water from titanium can be done in the bathroom. Due to the low cost, many summer residents install such devices in country houses.
Device Advantages
It is difficult to make the right choice when buying a water heating tank, so you should specify the main disadvantages and advantages of wood-burning titanium. So, the benefits are:
- long service life, because the body of the device is made of reliable material;
- fair price;
- quick heating (you have to wait half an hour to bathe in warm water);
- device can function without electricity and central water supply;
- large volume water heatertank (from 50 to 200 l);
- the power of titanium reaches 10 kW;
- quick installation device;
- easy to drain water from titanium for winter;
- boiler installed both outdoors and indoors;
- easy to use.
Disadvantages of wood-burning titanium
There are several negative qualities, namely:
- it is necessary to constantly monitor the process of fuel combustion, however, in modern models equipped with heating elements, there is no such defect;
- for titanium to work at full capacity, the firebox will have to be constantly cleaned of ashes;
- Sometimes there may be some problems with the water supply, so it is recommended to install a pump to increase the pressure;
- if you do not use the device for a long time, the question may arise how to drain the water from the titanium. If this problem is not solved, then the walls of the tank may simply burst due to exposure to low temperatures during the cold season.
Wood-burning titan upgrade
The main feature of the boiler is that it is not designed for high water pressure, since liquid is usually poured into the tank manually. Titanium can be upgraded independently so that it performs the functions of a heating boiler in a country house. In addition, with the help of some mechanisms, you can make the function of quickly draining water. To improve the boiler, you must complete a few simple tasks:
- Remove the mixer from the titanium, because in this case the circulation will occur according to the principle of an electric heater.
- Cold water will flow into the device from the hole where the mixer was located.
- If the question arises of how to drain water from wood-burning titanium, then you should install an air intake valve near the top fitting in order to quickly and easily complete the process of removing liquid from the tank.
- Recommended to install a relief valve.
Sometimes titanium is used as a reserve tank, because due to the lack of a central water supply, the device can be made into an open type boiler. Simply put, in this case, you won’t have to strain much to drain the water from the tank, since it will automatically flow into the bathroom through the faucet installed below.
Modern titanium models
Household appliances are getting better every year, so the modernization also touched on water heaters. Modern titanium models differ from their predecessors in the following ways:
- a special device (heater) is installed in a container with water, with which the liquid is heated;
- the device is equipped with a thermostat that shows the temperature of the water in the tank;
- Heated by electricity.
A modern water heater equipped with a heating element is a good choice if a boiler needs to be purchased for a summer residence. However, such titanium will have to be constantly cleaned, and for this it should initiallydrain water from it. It is the technology for performing this process that should be considered in more detail.
Why is it necessary to periodically drain the water?
Manufacturers advise regular cleaning of the water heater tank, as this is the only way to extend its service life. In addition, over time, hydrogen sulfide accumulates in the boiler, and this is an impurity that will give the water an unpleasant odor. So what is the purpose of titanium refining?
- The heating element and the capacity of the device are gradually becoming dirty. It is recommended to clean the boiler at least once a year. Water hardness is the main indicator that affects the rate of contamination of titanium. Due to the large scale, the heater will take longer to heat the water, and this will already entail energy overruns.
- To replace the anode that protects the device from corrosion. Before draining the water from the titanium and carrying out repairs, you should make sure that the warranty period of the boiler has expired.
- If the room is not heated in winter, be sure to remove all liquid from the tank, as it may freeze and damage the device.
However, the question of whether it is necessary to drain water from titanium can be answered in the negative. There are several reasons for this:
- If the boiler is not planned to be used for a long time in the warm season, the liquid in the tank must be left: the device will be protected from corrosion. In addition, accidental activation will not be a problem, since titanium, in which there is water, will definitely not catch fire.
- Without special skills, it is recommended not to repair at allsuch a household appliance, as it could be easily damaged.
- If the warranty period has not yet expired, since in this case it is recommended to call the wizard.
Periodical cleaning of the boiler is recommended to prolong its service life.
Bosch Titanium: instructions for draining water
The specified boiler is connected in two ways. In any case, first unplug the appliance and wait for the water to cool down.
If the Bosch titanium is connected using the standard method, then follow these steps to drain the tank:
- Drain the hot water, do not turn off the faucet, as air must enter the device.
- Connect a hose of the desired diameter to the fitting on the relief valve that is connected to the water supply.
- Open said valve and wait for water to drain from the tank.
- Close valve.
- Check if all the water has drained from the boiler.
The heating tank is sometimes connected according to a simplified scheme. Before draining the water from the Bosch electro-titanium, you need to make sure that the valve on the tap is working properly. In this case, to clean the boiler, you must:
- Drain the hot water completely, leaving the faucet open.
- Turn the valve on the safety valve, then wait 3-4 hours.
Draining water from the Real boiler
If the mentioned titanium is far from the bath, then you will needa long rubber hose that should reach the sink or toilet. Initially, turn off the water, and then disconnect the pipe and safety valve. The prepared hose should be tightened with a clamp, and then connected to the outlet and wait until all the liquid in the tank drains.
Before you drain the water from the Real Titanium, you need to check the quality of the sewer so that the liquid does not flow over the edge of the sink. At the end, the boiler is removed from the wall and washed from dirt and rust, and then installed in its original place.
How to drain water from Thermex titanium?
Initially, you need to disconnect the device from the mains. In addition, the temperature inside the tank should be checked, since accidents occur during the work mentioned, due to which a person may get burned. The technique for performing the work is as follows:
- Turn off cold water.
- Pour out all the hot water using the faucet or shower hose.
- Unscrew the nuts under the relief valve.
- Connect one end of the hose to the nozzle, and direct the other to the bathtub, sink or toilet.
- Before draining the water from the Termex titanium, unscrew the nuts from the pipe so that air can enter it.
The process is quite simple, but the main thing is to completely drain the liquid so that it is easier to remove the titanium from the wall.
Boiler "Ariston": step-by-step instructions for draining water
After a year of useit is recommended to clean the titanium tank. But first you need to drain the water, and for this you need to disconnect the plug, which is located at the top of the mixer. To do this, you will need the following tools:
- 32mm wrench;
- Slotted screwdriver;
- 4 mm hexagon;
- pipe wrench 1.
The following steps are required to empty the liquid tank:
- Close cold water tap and faucet.
- Disconnect shower hose and inlet pipe valve.
- Unscrew the flexible pipe through which water enters and direct it to a container (for example, a sink). The non-return valve should also be twisted, if there is one at the inlet.
- Before draining the water from the Ariston titanium, it is necessary to unscrew the nuts of the inlet and outlet pipes.
- Remove the cap located on the faucet, and then unscrew the screw, remove the handle and gaskets.
- Carefully detach the boiler body towards the faucet.
- Unscrew the plug at the top of the faucet using a hexagon.
- Now you can drain the water from the hole.
It is recommended to lay the titanium body in a vertical position, while the mixer tap must be left open. As a rule, the procedure for draining the water takes half an hour.
Conclusion
Any equipment sometimes has to be cleaned of accumulated dirt. A boiler that runs on electricity or combustible substances (for example, firewood) is no exception. This material discusses in detail the process of how to drain water fromtitanium. In this case, the main thing is to clearly follow the instructions and listen to the recommendations given in the article.
