We have to make repairs from time to time. And not necessarily in your apartment. Putty "Vetonit" will help to make it qualitatively. With it, you can level walls or painted surfaces, and then carry out painting work or glue wallpaper. Let's dive into the world of putty and look at several of its types:
Vetonite LR+
This is a finishing putty for dry rooms on a polymer binder. Suitable for walls and ceilings. The base for it should be smooth and made of mineral materials or plasterboard. The spraying method can be used to process chipboard and porous fiber boards. It is not suitable for floor leveling, grouting, and is not used as a tile adhesive. It is not recommended to use it in damp rooms. Putty "Vetonit" is applied to a clean, dry and dust-free surface.
Dry mixture (25 kg) is diluted in 9 liters of water and mixed with a drill with a nozzle for several minutes. You can add a primer to the water in a ratio of 1:10. Next, the mass is defended for 20 minutes for better dissolution. Putty"Vetonit" is ready for use after repeated mixing. The solution can be stored for no more than a day. It must not be poured down the drain as it may clog the pipes.
The mixture is applied with a two-handed spatula. The spraying method is also used. For partial leveling, use a small spatula. The excess is removed and reused. After spraying, the ceiling does not require further processing. When leveling in several layers, it is necessary to apply a new layer after one day. After the surface is completely dry, it is sanded with special paper. After finishing work, wash tools and equipment with water.
Vetonit TT
This is a cement-based Vetonit putty. It is not afraid of water and is used for leveling brick, concrete, expanded clay concrete and plastered surfaces in rooms of any type. It is not applied to painted, plastered with lime mortars, walls lined with water-soluble putties.
For 6 liters of water you need 25 kg of the mixture. Mix for two minutes with a powerful drill. 15 minutes the mass needs to settle. The solution is then remixed and used within three hours. The hardened surface can be painted. For this, alkali-resistant paints are used.
Vetonite VH
Finishing putty "Vetonit" is based on white cement and limestone. It is used for leveling concrete, expanded clay concrete, brick, plasteredsurfaces. It is suitable for both interior work and facade decoration. After its application, the walls are pasted over with wallpaper, painted or tiled.
"Vetonit"-putty is applied in a thin layer of 1-2 mm. Its consumption is 1.2 kg per square meter of surface. The composition of the mixture is absolutely safe for humans. Before work, the walls and ceiling are cleaned of dirt, lime, grease, dust, paints and glue. If they are too dry, then Vetonit putty is applied to the surface treated with a primer.
For 10 kg of the mixture you need 3.5 liters of water. Mixing is carried out with an electric drill, then defended for 5-10 minutes. After repeated mixing, the solution is ready. The time of using the mass is 3 hours. After work, the surface should not be exposed to direct sunlight for three days.
We have considered only a few types of putty "Vetonit". In fact, there are many more. All of them are 100% quality, easy to apply and great results!
