If the flash drive works well, but there are scratches and chips on the case, it is not necessary to throw it away and buy another one. An unpresentable, but working memory card can be used as the basis for a new one. A homemade flash drive will not only save money, but will also allow you to realize hitherto unclaimed creative potential.
Preparatory stage
The main function of a homemade case for a flash drive is to protect the board from damage, moisture and dust. It is also important to consider that the memory card must fit perfectly into the USB connector. It may not be recognized by a computer and other equipment if there is a gap at the connection point. In this case, you will have to throw away the flash drive or completely redo the shell.
A compact, pleasant to the touch and presentable item will please its owner more than a nondescript board, so it's better to make the case not only practical, but also beautiful.
First you need to transfer the information from the USB flash drive to another medium. This will save important data even if the card is damaged inwork in progress.
The next step is to release the board from the old shell. To do this, you need a pen screwdriver. In the process of extracting and manufacturing the case, it is important not to damage the flash drive. We must try not to get aggressive materials, hot glue or paint on it. You should act without the use of force, as carefully as possible.
Homemade USB flash drive can be made from various materials. As a rule, craftsmen use:
- lighters;
- wooden bars;
- lego bricks;
- old chips.
Very exotic options are also used: deer antlers, ivory, hot melt glue, cork wood and the like. The final choice of material remains with the master.
Plastic lighter
It's easy to make such a case. You just need to choose the right size lighter. It can be found at home, borrowed from friends or bought. If you choose a bright lighter, then the flash drive will turn out to be stylish and youthful. It is important to release all the gas before work, only then cut off the upper part.
Insert the drive into the resulting cavity and fasten it with glue for plastic. Leave for 1-2 hours. After the final hardening, remove excess glue.
Wooden block
Homemade flash drives made of natural material look solid and unusual. They serve the owner for a long time. You can make them from a regular bar. The form can be any, it all depends on the skills and imagination of the author. The workpiece consists of two parts. Onea hole for the board is made of them with a chisel. It is better to cover the drive with a thin layer of sealant. This will protect the board from dust and moisture.
It is necessary to sand well all the elements of the body with sandpaper. Then a board is installed in the hole, then the two parts are glued together. Use wood glue and a clamp for this. With its help, details are fixed for an hour. Remains of glue are removed from the body and coated with varnish or paint. For beauty, you can make an inscription or drawing.
LEGO bricks
With the help of cubes you can make a bright flash drive. It will be noticeable and stylish. To create it you need:
- pick up a cube according to the size of the board;
- make a notch for the USB connector;
- insert drive;
- fill voids with silicone pieces;
- cut another cube for the lid;
- glue parts.
Wait until the glue dries, then sandpaper to remove excess. Polish the finished product.
Old chips
The metal case will protect the board well and will look interesting. From unnecessary microcircuits, a compact storage of information is obtained. But for the manufacture of such a shell, you must be able to use welding.
A home craftsman can find two chips of the right size. The flash drive should fit perfectly in them. To prevent it from falling out, you can make a partition of copper wire. The board must first be covered with a protective layer and placed in a microcircuit. Then it is necessarysolder the parts together. If everything is done carefully, the memory card will look great.
The case for a flash drive can be made from different materials. There are simple ways that do not take much effort and time. You can make a shell for the board from improvised means. If you are not too lazy and learn how to make a homemade flash drive, you can not only save money, but also create a unique item with your own hands.
