Without a doubt, the key to a he althy and sound sleep is a good mattress. But, acquiring it, many buyers face a number of questions. Which type of mattress to choose? Which design is right for you? In this article, we will try to tell in detail about the construction of different types of high mattresses and what properties each of them has.
So. Mattresses that manufacturers offer to customers today can be divided into two categories: spring and springless. Springless models have less spring effect. They tend to be chosen by people who reject the "push" effect of springs. It would be a mistake to say that a high springless mattress is better or worse than a spring one. The absence of a spring block in the design gives a feeling incomparable to those that can be experienced on mattresses with springs. There are good models among some and among other models. However, you will find most mattresses of medium hardness among spring structures. But lovers of hard mattresses should pay attention to springless models. Now let's take a closer look at both categories.
Spring mattresses
In order. High spring mattresses can be divided into two more groups - dependent ("bonnel", continuous weaving) and independent. So. Dependent spring blocks ("bonnel") are usually used in high mattresses. Economy class. In this design, each spring is connected to the neighboring one quite rigidly, and by pressing one, you push through the neighboring ones as well.
The disadvantage of such structures lies precisely in the rigid fastening of the springs, due to which the supporting effect is reduced, since the springs react to the weight of a person together with their neighbors, and not separately. But, given the fairly affordable cost, this option is quite acceptable for many, especially if he is changing an old sagging cotton mattress.
Independent springs. In this design, each spring is barrel-shaped and placed in a separate case. In other words, the springs are in contact with each other only by covers. Thanks to this solution, any vibrations of the structure are completely excluded, and the load is distributed more evenly over the entire area: the mattress “adjusts” to the human body. And bends only in the right places. On such a high spring mattress, you will not experience the “hammock effect”. In a word, very convenient.
Spring independent blocks are divided into standard - 200-300 springs / m², and small diameter - more than 500 springs per m², which are called Multipocket. The smaller the diameter of the spring, and, accordingly, the greater the number of springs per square meter, the more clearly the mattress distributes pressure and follows the contoursbody.
Springless mattresses
Next. We have already said that this category should be paid attention to those who need a high hard mattress. On the modern market there is a large selection of such structures made from a monoblock of one material or from various materials (in terms of stiffness and properties).
Latex mattresses
Such natural latex products are medium-hard or soft, but always elastic. They follow the contours of the body as accurately as possible. Mattresses made of latex, polyurethane foam, waterlatex, bilaxilast are well-ventilated products that can withstand heavy loads and have good support properties.
They are recommended for people with problems in the upper spine, as well as teenagers. Such mattresses are supplied to our market by Italian manufacturers - Bedding, Magniflex, Mollyflex, Montalese. In recent years, Russian analogues have also begun to compete with them: Atmosfera, Lonax, Mr. Mattress and others.
Multilayer constructions
Multilayered mattresses, for example, in a combination of "coconut-latex" - usually hard. This is an excellent choice for connoisseurs of natural materials. But in this case, we must not forget that coconut has a weight limit - no more than one hundred kilograms per bed. With more weight, the life of the product is significantly reduced. Coconut mattresses are often recommended by pediatricians for newborns, as they are natural,well breathable and tough.
Dignity:
- do not creak;
- comfortable;
- well ventilated;
- easy to transport (can be rolled up);
- does not accumulate static electricity.
Flaws:
- wet;
- dries too long;
- filler often wrinkled.
High bed mattresses
Next moment. Once the mattress was a mattress - a quilted bag stuffed with cotton. Modern models are attractive not only externally. Their internal structure has undergone major changes. Even in springless versions, the packing is not randomly placed in the case, but is glued together from different materials in several layers.
As a rule, at least two blocks of foam with a certain level of rigidity are sewn into the shell. There are models supplemented with “memory” layers. These are foam materials that have the ability to remember the contours of the body. In frame models, the “stuffing” is even more complicated: under the flooring there is a block of metal springs. An additional hard layer is laid over the steel frame, which protects the cover from being squeezed through, and the sleeper from the metal resting against the side.
Top Producers
When purchasing a bed and a mattress for it, not all buyers pay attention to the label on which the manufacturer is indicated. And, completely in vain - often it depends on whether your purchase will cause he alth problems, and how long the product will serve you.
The safest and highest quality high mattresses are made by companies that develop their own developments and actively cooperate with orthopedic doctors. These include:
- Ormatek.
- Askona.
- Dreamline.
- Sealy.
- Serta.
Inflatable Mattresses
Most recently, inflatable pillows and mattresses were associated with a beach holiday. But today such products are also used in everyday life, for sleeping. High air mattresses (up to 25 cm) are made of high density polyvinyl chloride. Which provides rigidity and elasticity. It should be noted that mattresses for sleeping and outdoor recreation are different. In the first case, they are distinguished by increased strength, since they are subjected to serious loads every day. For cushioning, they use air chambers made of rubber or vinyl, which are lined with foam rubber.
Such products are produced single, one and a half, double. In recent years, improved models have appeared, with a layer of foam that has a memory effect. Mattresses use different types of valves. Sometimes it resembles a plug, or it is screwed in, which is more reliable.
How to choose an air mattress?
- Don't be tempted by a model that is too cheap: it is unlikely to be of high quality.
- Pay attention to the type of assembly - machine or manual. The first option is preferable - such models are stronger.
- Mattresses with an orthopedic effect should havecontour frame. If there is none, it is hardly possible to talk about the presence of orthopedic properties.
- Try the feel of the coating. It must be durable and non-slip.
- Important if the model has a pump included.
- Need to know if the cover is removable from the mattress for washing, is the top fabric practical.
- Place the product at an angle on a short edge - it should not bend.
Inflatable model benefits:
- This mattress is good if you need to organize an extra bed.
- Inflatable products are very convenient to store.
- Light weight and compact. Some models weigh less than three kilograms.
- Fast inflation. This is especially true for high air mattresses for sleeping with a pump. Hand, foot or built-in. The ability to adjust the elasticity and density of the mattress yourself.
- With anti-slip waterproof coating.
- Do not absorb odors, do not spread dust mites.
- The kit usually includes a repair kit with a patch in case of damage.
- Orthopedic models developed.
Flaws:
- Over time, the air mattress begins to release air and needs to be pumped up.
- Prone to mechanical damage.
- Mattress creaks when used on bare floors.
- It is not very comfortable to sit or sleep on an air mattress together.
- Shorter life than a standard mattress.
Popular models: Intex Super ToughAirbed
Single high inflatable mattress with pump, made of thermoplastic polyurethane foam. Its elasticity is guaranteed by Dura-Beam baffles. The mattress can withstand loads up to 140 kg. Thanks to the flocked surface, bed linen does not slip from it. Mattress weight - 4.2 kg. The model has a built-in electric pump, which is charged from USB or a car cigarette lighter. A bag is provided for storage.
Intex Orthopedic
Single high inflatable mattress, the sides and top of which are made of flocking. It has a 3 in 1 valve that allows you to inflate the product with different types of pumps. Product weight - 5 kg, can withstand significant loads - up to 273 kg.
High orthopedic mattresses
A separate category of products that deserves special attention. The main feature of such products is maximum support for the spine. The orthopedic mattress exactly repeats the curve of the body and guarantees a comfortable sleep due to the correct position of the sleeper, as well as normal blood circulation. Such models have a verified structure and a comfortable degree of rigidity. We will present you the best models in different types of mattresses.
So. Choosing an orthopedic high mattress (up to 28 cm) follows two criteria: spring and springless. Spring orthopedic mattresses can be divided into soft, hard and medium hard products. The choice of the buyer depends to a large extent on individual preferences.
Low Firmness Mattresses – TorisCollection
Excellent orthopedic model with good support properties and combined filler. Sellers recommend such a high mattress for children, which is a mistake. Since, in order to form the correct curve of the child's spine, rigid products are required. This mattress is recommended for those who periodically need to change the rigidity of the bed.
Medium hard models: Benartti Optimal MAX Duo
High orthopedic mattress (25 cm) can withstand up to one hundred and forty kilograms. The most durable materials used as a filler - natural and synthetic latex, coconut coir. The orthopedic characteristics of the mattress are slightly inferior to the comfort created by a very pleasant to the touch coating.
High rigidity. DreamLine Eco Strong
In this high mattress, special inserts are used between the springs of the bonnel block to enhance the bearing capacity. For one seat, the maximum weight reaches 150 kg. The features include the permissible difference in the weight of sleeping up to twenty-five kilograms. This guarantees he althy and restful sleep. Customers note the durability of this product, as well as the preservation of the original characteristics throughout the entire period of operation.
Hönnemed Traum
Very comfortable mattress filled with natural linen. This unique orthopedic design relieves muscle tension and ensures efficient blood circulation. This model does not lose its orthopedic properties for many years, and a special technology does not allowdeformations during prolonged exposure to a certain area. However, it must be taken into account that this model is not designed for too much weight - one hundred and ten kilograms. Along with this small drawback, only premium models can compete with it in terms of comfort.
A few words in conclusion
We have described to you popular models of high mattresses, which are presented on the Russian market, related to the middle price category (up to 20 thousand rubles). If you experience serious back problems, suffer from a severe form of osteochondrosis or a complex disease of the spine, we recommend that you consult a specialist and choose more expensive models.
