The construction of a steam room consists of several stages. Taking bath procedures with good flooring is much more pleasant and comfortable. Therefore, a double floor is made in the locker room, that is, first a rough floor, and on top - a finishing floor. Traditionally, a Russian steam room is equipped with a wooden or concrete floor. When arranging the base, they always think about how to make the floor in the bathhouse so that it is warm?
Wooden floor
The classic wooden floor never loses its relevance. This material is environmentally friendly, and wood always creates a feeling of comfort. Wooden surfaces are aesthetically attractive, they are associated with stability, solidity. British scientists say that the presence of natural wood indoors is the prevention of asthma.
How to make a floor in the bath so that it is the best option? One of the best floorings is double wooden. Two types of wooden bases are mounted in the bath - leaking and non-leaking. Leaking needdry all the time, so the second option is more often used. Non-leaking bases are mounted with an inclination so that water flows into the drain hole. In addition, they must have a rough flooring.
Draft floor
How to make a rough floor in the bath correctly? Logs are laid on pre-prepared concrete pillars. Support chairs are made of wood, only a concrete platform is necessarily poured under them. The distance between the beams should be 60 cm. When installing a leaky flooring in the bath, they do not make a slope, but a non-leaking floor is laid under a slope. To get such a slope, cuts are made on the bars. It is impossible to save on beams, the thickness of the lag depends on the distance between them and their number. In the place where the furnace will stand, it is necessary to further strengthen the bars. Then lay the boards, insulation and vapor barrier. After that, the bars are strengthened, and the final flooring is installed on top.
The concrete floor in the bath has a drawback - it is cold, so it must be insulated. First of all, you can put a concrete base in 2 layers, and between them thermal insulation. The bottom layer should include crushed stone. Before pouring, guide beacons are installed along the room. The level checks in all directions. Concrete mortar is poured from the corner of the room. Having smoothed the first batch of the solution, prepare the next one. It is necessary to ensure that there is no wave-like transition when pouring the floor.
Insulation
How to make a floor with a gasket in the bath? as a heat insulatormaterial used expanded clay, glass wool and perlite. The gasket is prepared from the following components: perlite (3 buckets), cement (1/2 bucket) and water (1.5 buckets). The resulting mixture is poured onto concrete in a thin layer. Such a base is considered reliable and durable.
Specialists also make water heated floors. They consist of pipe systems that are in a screed. They also make electrical warm bases by mounting electrical cables.
Ventilation
This is a very important point that needs to be paid special attention to. To do this, a ventilation hole is made in one of the walls, and a box made of tin or wood is mounted below. In this case, one end of the box goes to the roof, and the other goes down. Any owner of a bath - provided that he erected it himself - can share information from personal experience on how to make a floor in a bath.
Conclusion
Wooden flooring decorates the steam room - it becomes comfortable in it, and the body receives a charge of vivacity and he alth prevention for many years. If professionals take up the matter, the floor in the bath will be installed correctly.
