Many today are interested in the question of how to make karambit at home. Moreover, it is necessary that it be possible to make it from improvised elements, without using expensive factory materials.
Production techniques
How to make karambit? The manufacturing technology is very easy and simple. First you need a circular saw blade. It is necessary to clean it from rust and grease using sandpaper. Then, with the help of gasoline, it is necessary to carry out a complete degreasing.
For these purposes, you can use absolutely any solvent. Degreasing is necessary so that the protective layer of varnish adheres well and does not fall off during electrical corrosion. You can use nitrocellulose varnish. It is good because it keeps well on the surface of the product and dries very quickly. For the best effect, it is necessary to apply three layers of varnish on each side of the disc. Apply varnish with a brush.
But if there was no brush at home? How to make karambit? It does not matter at all, since you can use an ordinary ear stick. The necessary model of karambit can be found in the shortest possible time. For convenience, you can print a picture that shows a karambit (drawing) so that it is always in front of your eyes. Then you need to carefully cut out the drawing of the knife. And with the help of undiluted nitro-varnish, glue the cardboard knife to the steel disk. We circle it with tin wire, which we connect to the negative contact from the power supply and, of course, to the disk itself. You can fix the wire with superglue, which will do an excellent job.
Preparation
Then circle the knife model over its entire area and prepare for the oxidation process. It is quite long, but silent, which is a positive thing in this case. The electrochemical reaction must be carried out until the knife model is separated from the steel disk. Three long reactions of this kind are enough to achieve the desired effect. The knife after such manipulations is quite easily separated. Then, using sandpaper and a file or a special electric tool, you need to proceed to the process of turning the knife and bringing it into perfect shape.
Then, using a grinding tool, it is necessary to grind both sides of the knife.
How to make a karambit handle
How to make karambit with ease? In order to make a handle for a karambit knife, you must use a high-strengthmaterial. In this case, getinaks is perfect - resistant high-strength plastic. In addition, it is very well processed. You can cut it with a hacksaw. The surface of the handle pads must be treated with coarse sandpaper.
We apply hydrochloric acid to the surface of the karambit handle for etching. The completion of the reaction can be determined by the matte surface of the metal. The reaction products can be washed off with ordinary cold tap water. Then dry the knife thoroughly and apply epoxy. You also need to apply it on the lining for the handle. When warmed up, excellent bonding will occur. After we carry out the final grinding of the knife to give a beautiful look. And in the end, you can enjoy a karambit knife made with your own hands.
Precautions
When you take this job, you should understand that it can be easy for those who are familiar with turning and are well versed in metals and all kinds of chemical reactions. When applying epoxy to a knife, be careful not to touch it with your bare hands. Carry out the sanding carefully. This kind of work should be carried out in a room that is well ventilated.
