Having a child in the family, you have to take care of him more than yourself. And remembering my childhood, I want to give the baby something that his parents did not have. One of these joys can be a treehouse. Surely, many dreamed of having a small and cozy house, located in its dense green crown. From there, a great view will open, and the place itself will become a favorite for kids to play. The most important thing is that you can build such a home with your own hands. The only basic requirement to be met is security.
Preparation for work
The first step towards making a treehouse with your own hands will be the choice of a suitable support. In this case, it is a trunk, and therefore the choice of a tree is one of the most important tasks that a builder faces. It should be said right away that plantings such as birch, poplar, willow or chestnut are not suitable. The reason is that the trunk is too weak, unable to withstand the weight of the structure. The best choice would be oak, spruce, maple, beech or fir. The trunks of such trees are quite hard and strong, able to withstand the weight of a person and a small house.
Correct choice of tree
After it became clear which trees are suitable and which are not, it is important to consider a few more details. Not any oak or maple is suitable for building a treehouse. First, the support must be large enough. Secondly, the tree must have a large number of branches, which will indicate the presence of a powerful and developed root system.
After the object has satisfied the master in all visual parameters, it is necessary to carry out an additional check. Its essence is as follows: you need to take a wooden stick and hit the trunk several times. If a dull sound occurs upon impact, then the tree inside is rotten and decrepit, it cannot be used as a support. In addition, those plantings that are overgrown with moss or mushrooms should be avoided. These parasitic growths quickly undermine the plant from the inside, destroying it and thus making it an unreliable support for construction.
How to make a treehouse?
After the tree selection stage has been completed, you can start building the object. The primary task of the builder is the erection of the platform of the hut, which is the foundation for him.
In order to build a strong platform for the house, it is necessary to place two beams at the selected height on opposite sides of the tree trunk, while fixing them not with nails or self-tapping screws, but with anchor fasteners. It is also worth adding that one bolt with a diameter of 6 mm and a length of 10 to 15 cm is quite enough to attach one beam to the trunk. If you attach a beam to twoor more bolts, this can adversely affect the he alth of the tree, causing it to rot and break.
How to make a treehouse with your own hands
The second step after mounting the beams parallel to each other is to install additional supports. They should be placed on adjacent sides of the trunk. They should be placed perpendicular to the previous two. They should also be higher and eventually form a cross. At this stage of construction work, it is important to think about safety. It is recommended to tie the beams that will be attached to the tree with cables or ropes to the upper branches.
After this stage is completed, you can proceed with the installation of a rectangular frame, which will become the basis for the floor in the treehouse. The supports for such a platform will be four beams installed lower than the first two, parallel to each other. In addition, the installation of these wood supports must be carried out at an angle of 45 degrees.
The next step in the construction of the facility will be the arrangement of the floor. In order to build it, you can use any wood products. It is recommended to use ordinary nails as fasteners. At the same stage, it is necessary to think about placing a place for a manhole, through which in the future it will be possible to get into a treehouse.
Sturdy house option
If you want to build the safest hut for your child, it is recommended to choose a polygonal platform as the main platformplatform. On this basis, you can even place a small plastic slide. Installation of this design will be carried out using three wood supports, and a clamping collet is used as fasteners.
In order to get into the hut, you can equip ordinary wooden steps under the tree or hang a rope ladder. The second option is more dangerous in terms of climbing, but the impressions from it will be much brighter. In addition, if a rope ladder is chosen, then a large amount of sawdust can be poured under the base of the house. They will soften the blow when falling, and also will not allow any weeds to grow. To further increase the safety of your child, you can install small railings in the house.
Selection of material
Before you start building a building, it is important to determine the amount of material needed. You can focus on different schemes that are on the Internet, but these are only approximate options. You need to build on your own measurements.
In order to accurately calculate the required amount of building materials, you need to measure the distance between those trees that will be supports. After taking measurements, it is important to decide on the design of the hut. The amount of consumable material will also depend on it.
Step-by-step construction of a hut
The first stage of construction begins with the fact that the prepared beams are sawn to the desireddimensions, as well as the installation of supports for poles. Further, the direct installation of the pillars into the prepared supports is carried out. The next step at this stage will be the installation of beams. First, external structures are mounted, and then diagonal, between the installed pillars. When carrying out all construction work, one very important rule must be remembered. The fastening of the structure must be strong enough, but at the same time elastic, since in the wind the tree will sway and pull the hut along with it.
The second stage of building a tree hut is the installation of the crossbeams. This operation is carried out on the spot. It is important to firmly fasten all beams, clamps and poles together in order to understand exactly how the future structure will look like in its entirety.
The third stage is the strengthening of the frame. At each corner of the strut, the necessary frame should be reinforced with a bed.
Fourth - work with the bindings of the house. At each right corner, the existing framing must be bolted to the support posts.
The fifth stage is the installation of a movable joint. It is necessary to find a thin trunk of a tree, fix it between the planks and beds. Mounting in this way will help make the house movable.
After completing these basic steps, you need to do the following: install the suspension structure for the hut, check all the knots, attach the beds to the tree trunk, arrange the flooring, make the railing, install the children's slide.
Treehouse design
If everything is clear with the question of how to build a treehouse, then it should be added that thisit does not have to be a monotonous design of the same color. It can be painted with various colors, decorative work, and redesigned to look like a fairy tower, a flying ship, etc.
