Those who have encountered rodents in their own home do not always know what to do about it. You need not only to know how to charge a mousetrap, but also to understand what they are, how they work and what results should be expected.
Before you start buying, you should know what types of mousetraps you can find on store shelves.
Spring
This type of trap is the most common. These are the simplest devices. Most often made from a piece of plastic / wood, equipped with a bracket and a spring. There must be a place where you need to put the bait for the rodent. The mouse, attracted by the smell, approaches the trap. Touching the food, she starts the mechanism. The spring throws out the brace, killing the rodent.
Such traps can be used repeatedly by removing the dead animal. Understanding how to charge a mousetrap is easy. You just need to pull the spring and put a piece of food on the hook.
Traps
Such trapsvery light, because they consist of two "jaws" made of plastic. They work due to the spring, which, straightening, slams the jaws. The trap responds to movement. Its scheme of work is simple, even a child will figure out how to properly charge a mousetrap of this design. The bait is placed between the parts that slam shut when touched by a rodent. As a result, the mouse dies.
Electronic models
Such mousetraps are the latest technology. An electric charge is used to kill mice. The trap is a box connected to electricity. It is not difficult to learn how to charge a mousetrap, the instruction of which is attached to the product. The device works as follows: the animal enters the box, getting into a kind of electric chair.
Traps that don't kill
Created several models of mousetraps in which the animal does not die. This is a great choice for those who don't want to get their hands dirty with mouse blood. Prisoners can be released far from home into the wild. Using these traps requires more than just understanding how to load a mousetrap. Traps should be checked regularly as a captive mouse can die for two reasons:
- dehydration;
- stress.
Among other things, it's very important to make sure the mice can't get home from where you released them.
Glue
Glue in traps is used natural or synthetic. Before charging the mousetrap, you need to put it in a plastic tray,wood or plain cardboard. The bait is placed in the center, making sure that the ring of glue is not broken. Having reached the food, the rodent is securely glued to the stand, losing the ability to move. Such animals die from dehydration, starvation or even suffocation. Since the mouse dies slowly, activists are trying to list this type of trap as a product that prolongs the torment.
Homemade mousetraps
It is not necessary to purchase a trap in the store - you can assemble this device at home. Such devices work no worse than purchased ones. With their help, knowing how to charge a mousetrap, you can get rid of pests in the country and at home. For such a device, you need things that can be found in any household.
To set up a trap at home, you need to take a bucket three-quarters full of water. To make the mouse die quickly, soap should also be added here. Then put the bucket in the place of accumulation of animals. In order for rodents to climb to the bucket, a ramp (board, panel) should be installed. Floating food is lowered into the water. Attracted by the scent, mice will fall into the bucket and drown.
You can get rid of pests with a large number of different models of traps. With the help of any of them, you can protect your home from a rodent. It is very important to start the extermination of mice in time, as they are carriers of dangerous diseases. For example, it could be hantavirus, which is spread through urine and droppings. Rodents, in addition, are carriers of bedbugs and ticks, whichcapable of infecting humans with Lyme disease.
For the initial stage, it is better to use homemade traps, since charging a homemade mousetrap, as well as making it, will not be difficult. Such a device is no less effective than expensive store devices. But such a simple design can save money that could be spent on the purchase of proprietary products.
