Bulgarian is a tool quite useful in everyday life and at work. It can be used to perform a wide range of tasks. An angle grinder allows you to cut stone, metal, tiles, grind surfaces, etc. But many home craftsmen are wondering what can be done from a grinder with their own hands.
Self-finishing to a cutting machine
The simplest homemade machine is a small angle grinder. The work will be accompanied by a minimum of costs, and the manipulation will take a few hours. The outlet structure will be a long metal tube that acts as a handle and frame.
A transverse metal bar with two holes for fixing the tool is welded to one of the ends. On the same side, the pipe is fixed to the angle piece on the movable shaft. The first can be fixed to the desktop or to the floor in the working room. If abefore you the question arose of what can be made from a grinder, you can make a cutting machine, acting according to the described algorithm. According to him, on the opposite side of the mount, it is necessary to fix the spring, which will ensure the return of the structure to its original position. Upon completion of this stage, you can use your homemade product. It will only be necessary to install the device correctly.
This version of the machine is the simplest solution for metal processing, while complex work will require precision, so the design for solving such problems must be made more stable, which means that the work will have to be approached more thoroughly.
Features of making homemade products from a broken tool
Bulgarian is not an eternal thing, so after its failure, you can use the equipment for other homemade products. Sometimes it happens that the engine or gearbox breaks down. The housing may break or the gear teeth may be sheared. However, you should not rush to throw away the device. Something one of the two nodes of the grinder can still work.
If you are considering what can be done with a broken grinder, you should consider the engine. But due to its high speed, it is rarely suitable for rework. This part of the angle grinder can form the basis only if an engraver is made. You will need to cut off the gearbox and attach a cartridge to the shaft for different nozzles, there are a huge number of them on sale.
If you are stillinterested in the question of what can be made from a grinder whose engine has flown, you can use a gearbox. It is metal compact and has a powerful bearing on the output shaft. Due to the existing threaded connections, the gearbox has good mounting options. The gearbox can be mounted on a drill using a special adapter. But on such tools, the cutting wheel can be a source of danger. Therefore, the gearbox is recommended to be adapted in situations far from the original function of the angle grinder. For example, you can make a wood floor sander. This dusty work can be done comfortably by adjusting the speed and the bevel gear. A large area can be covered with a wide disc, which speeds up the process.
Quite often, home craftsmen think about what can be done from a grinder gearbox. The cone assembly is compact so it can be used for a variety of tuning and adjustment tasks. For example, to adjust the desktop on the machine. The gearbox is also widely used to create outboard motors. The issue of sealing the propeller shaft can be solved by sealing. Outside the gearbox, you can install an additional oil seal on the propeller shaft under the slip ring. But for motorized bikes, you don't need an oil seal.
But if you are still interested in the question of what can be made from a grinder, you canuse its gearbox, transferring torque to the wheels. The described node is installed on the wheel axle. Using a traditional chain, you can adapt the protective standard casing as a holder for a gearmotor. The electric motor may not be limited to using an internal combustion engine. The gearbox of the grinder in this case will be able to withstand even high loads.
Thinking about what can be made from a grinder, you can consider making a coffee grinder. It is suitable for lovers of an active lifestyle who prefer to sit in the silence of the forest from time to time with a cup of fragrant freshly brewed coffee. You don't have to think about the engine, because the mixer has a special shaft that rotates custom nozzles.
Making a machine with a bed
You can also make a cutting machine from a grinder. To do this, prepare the following tools and materials:
- profile pipe;
- steel angle;
- metal sheet;
- welding machine;
- drill;
- channel;
- bearings;
- shaft;
- pipe;
- spring;
- pedal relay.
If there is a desire, the sheet of metal that will go to the platform can be replaced with chipboard. The plate will become an easier option. There should be several bearings, they should be the same. If you think about it, welding can be replaced with strong bolts, and for this you need a drill. This option will allow you to disassemble the machine whennecessary.
Working on the frame and ruler
The simplest frame will consist of frames mounted on the same axis. The lower one must be fixed on the platform. If the tool is large, it is better to use metal. An angle grinder is screwed to the upper frame, which will rotate vertically according to the pendulum principle. A spring is needed to fix the initial position.
A mount is welded to the bottom frame, which will consist of a clamping angle and a clamp. Measuring parts should be provided in the machine. In this case, a movable ruler with a limiter is better suited. It is welded to the pipe.
Electronics
In order to make the work more convenient, the design should be supplemented with a switch button or a foot pedal. In the first case, a low-voltage relay is used, voltage will be supplied to the tool through it. This simple design allows you to free your hands and achieve a smooth cut without the use of a vise. You will also save time on this, because you do not have to make accurate measurements.
Making a miter box
What can be done from a burnt grinder, you now know. But if the tool has not failed, and you want to expand the range of tasks it performs, you can make a miter box. For this, the tabletop is made swivel. This will allow you to cut a baguette, plinth or profile from different materials at a certain angle.
The tabletop is set at an angle, the appropriate disk is mounted, then thecutting that turns into pleasure. With the help of such a home-made machine, you can cut paving slabs diagonally, thereby diversifying the ways of laying it.
Making a wall chaser
What can be done from an old grinder? This question is often asked by home masters. But if your angle grinder is working properly, you can make a wall chaser out of it. Using equipment without modification, you put yourself in danger. In order to avoid the risk, you can make a nozzle with a solid base, it will allow you to make cuts in the walls for the entire diameter of the disk.
This addition is a sole in the form of a stop that allows you to move the tool along the wall. Efforts in this case will be uniform. When you make such a device, take the time to install a closed cover, which will be complemented by a pipe for connecting a vacuum cleaner.
In conclusion
If you are among those who wondered what can be done from a broken angle grinder, you can consider the examples above. Among other proposals, it should be noted: an engraver, a grinder, a boat motor, etc. With the help of the gearbox of the described tool, even a motorized bicycle can be modified.
