If the kitchen does not have enough free space, then its use sometimes becomes inconvenient for some housewives. For example, it is not possible to purchase most modern hoods. Especially for this, the latest technical solutions have been developed and created - fully built-in hoods. They are great for those kitchens where there is no way to arrange large air ducts and bulky cleaning structures. If you are also planning to purchase such equipment, then you should read the information below.
Main types of fully built-in hoods
In modern kitchens, you can increasingly find very non-standard solutions for furniture placement and layout. By choosing a built-in hood, you can find the most convenient place for arranging the cooking area. Manufacturers are not limited to conventional models, which is why a modern hood can even be built into a wall cabinet.
If you are interested in fully built-in hoods, then you should deal with their main varieties. One of them is the modelhorizontal type. You can place it directly above the hob or stove, while the structure is fixed on the underside of the cabinet, in which there is no bottom. This design is hidden behind the walls of the furniture, but in some cases it is installed in such a way that the bottom panel extends slightly beyond the cabinet.
Fully built-in hoods are also available for sale in the form of models that can be built into the countertop. This option is suitable for rooms where the hob is installed in the headset, and the hood itself must be located at some distance from the cooking zone. At the same time, the air will be purified due to the automatic opening of the shutters, which suck in pollution before they rise and spread.
Flat hoods
When visiting the store, you will be able to meet not only retractable, but also built-in hoods that can change their height in the vertical direction. Flat structures can be considered similar to the first option. The main difference is the installation feature.
The design is fixed under the wall cabinet, does not imply the need to remove the bottom, but works in air circulation mode. Telescopic hoods are also built-in, their bottom panel slides out during cooking and has filters.
Expert advice
If you decide to consider fully built-in hoods, then you need to take into account the furniture layout. Thus, if there is no free space for storage, then thismay exclude the possibility of placing such a model, which is especially true when there is an air duct.
But slider panels can create obstacles when moving around the room while cooking. Despite the fact that there are some restrictions during installation, the hoods of the described type have many advantages. Particularly popular are models that can be fully integrated into pieces of furniture.
Key Benefits
A fully built-in hood, reviews of which are only the most positive, has many advantages. Many pay attention to the assortment range. There should be no restrictions on the choice of colors, materials and shapes for the consumer. However, for the reason that such models will hide behind the walls of furniture, you should not make design a top priority. It is better to pay attention to other pluses, including:
- possibility of body masking;
- easy installation;
- multifunctionality.
Due to the fact that the products can be completely hidden, you will have a great opportunity to save space in the interior. You can mount the hood yourself, without resorting to outside help. Such devices are multifunctional, they have not only an automatic shutdown mode, but also a backlight, a timer and other useful functions.
The 60 cm built-in cooker hood is not the only model. Modern manufacturers offer for sale designs withdifferent sizes, which can be perfectly fit into a wall cabinet with certain parameters. Moreover, you can choose a model that is controlled by an electronic or mechanical system. Some of them have remote control.
Consumer Reviews
Users note that the cases of such devices are easy to clean, and internal filters can be changed quickly and independently. Buyers pay attention that after the launch of a particular model, it works at a low noise level, and the performance remains at its best. However, in most cases this is true when the equipment is operating at medium speeds. Ease and practicality will largely depend on the correct installation. This will be discussed below.
Installer's advice
Fully built-in cabinet hood 60 cm can be mounted by you yourself. First you need to measure the distance between the hob and the bottom of the piece of furniture where the equipment is supposed to be placed. If a gas stove is installed in the house, then this parameter can be equal to the limit from 70 to 80 cm.
If we are talking about an electric hob, then the distance can be reduced to 60 cm, but you should not do it less. If it turns out that there is not enough space, then this can negatively affect performance. In this case, the filters will quickly become clogged and the surface will lose its appearance.
For reference
The kitchen hood 60 cm shouldbe arranged according to one of the existing technologies. You can not use furniture by creating a niche in the wall. This will use the free storage space, but the work will take a long time.
Work technology
The hood of 60 cm must be lined up according to a certain method. It involves, at the first stage, marking in a niche or cabinet. At the desired height, a horizontal line should be drawn, along which the master will navigate when installing the equipment. Holes for screws are made in the cabinet body. In this case, the parameters of the hood model must be observed. Next, you can proceed to fix the device.
Many models require the necessary fasteners. Using a level, you can make sure that the device is located strictly horizontally. There should be a small distance between the walls of the equipment and the cabinet. This will not only reduce the risk of damage to furniture, but also save the owner of the apartment from additional problems that may be associated with noise and strong vibration during operation of the equipment.
Once the 60 cm hood has been installed, you can start connecting the vent pipe. It is fixed in the hole of the device and leads to the ventilation shaft. For this, a corrugation is used, the pipe should be located in such a way that there are no bends in it on the way to ventilation. Otherwise, the equipment will not cope with air purification. It is important to seal the seams so that air does not escape back into the room. Fully built-inhoods are installed taking into account the connection of communications, which must be checked for serviceability. They must be located next to the outlet, which should be located near the working area. If the work is not accompanied by strong noise and other reactions, then no mistakes were made in it.
Advantages of the Elikor Integra hood
Fully built-in extractor hood Elikor "Integra" 60 cm, according to users, has a fairly simple design. It does not make too much noise in operation and is inexpensive. It draws air well, but in winter this can be a problem.
Consumers also note that this model is very easy to use, the build quality is excellent, the design is attractive, although this does not make much sense with this option. The panel is convex, for many users this is a significant plus. If you are on a budget, then consumers who have already experienced all the advantages of this option are advised to purchase it. The model copes with its tasks perfectly.
Advantages of Bosch Hood DHL 545S
The fully built-in Bosch hood of this model has an acceptable cost, you will have to pay 9,500 rubles for it. The manufacturer gives a guarantee for 12 months, during which time you will be able to evaluate the quality of the product. The product is compact and suitable for small spaces. The case is painted in silver, so you can fit the model into any design project. The maximum performance is quiteimpressive and amounts to 540 m³ / h. This indicator was achieved thanks to the switching of speeds.
In the operation of the hood, you can use an intensive level. With the slider control system, you can choose from four speeds, which simplifies operation and makes operation possible even when the equipment is used by elderly people. If you install a fully built-in hood of this type, you will be able to use several modes. Among them, it is worth noting the removal and circulation. High-quality work will also be ensured by the presence of grease filters. The latter are extracted and cleaned, as they have a fairly simple design.
This 60cm kitchen hood is a wall-mounted model with a power consumption of 310W. Before purchasing, you should consider that the equipment does not have a display, and a halogen lamp is used as lighting. You will have to monitor the contamination of the filter yourself, because the equipment does not have an indicator, as well as an anti-return valve.
Conclusion
Before purchasing a built-in hood, you should familiarize yourself not only with the technical specifications, but also with the manufacturer, who could in some way establish himself in the market for the relevant products. For example, Simfer machinery is capable of delivering throughput rates of up to 460 m3 per hour. Typically, these models are made out of glass, and you can buy them for 4800 rubles. In the sameIn the price category there is Hansa brand equipment, the capacity of which reaches 300 m3 per hour.
