The majority of people are convinced that energy for existence can only be obtained from gas, coal or oil. The atom is quite dangerous, the construction of hydroelectric power plants is a very laborious and costly process. Scientists around the world say that natural fuel reserves may soon run out. What to do, where is the way out? Are humanity's days numbered?
All from nothing
Research on the types of "green energy" has been intensifying lately, as this is the way to the future. Our planet initially has everything for the life of mankind. You just need to be able to take it and use it for good. Many scientists and just amateurs create such devices? as a generator of free energy. With their own hands, following the laws of physics and their own logic, they are doing what will benefit all of humanity.
So what kind of phenomena are we talking about? Here are a few:
- static or radiant natural electricity;
- use of permanent and neodymium magnets;
- getting heat from mechanicalheaters;
- conversion of the energy of the earth and cosmic radiation;
- implosion vortex motors;
- solar heat pumps.
Each of these technologies uses a minimal initial impulse to release more energy.
How to make a free energy generator with your own hands? To do this, you need to have a strong desire to change your life, a lot of patience, diligence, a little knowledge and, of course, the necessary tools and accessories.
Water instead of gasoline? What nonsense
An engine running on alcohol will probably find more understanding than the idea of decomposing water into oxygen and hydrogen molecules. After all, even in school textbooks it is said that this is a completely unprofitable way of obtaining energy. However, there are already installations for the extraction of hydrogen by ultra-efficient electrolysis. Moreover, the cost of the resulting gas is equal to the cost of cubic meters of water used in this process. Just as importantly, electricity costs are also minimal.
Most likely, in the near future, along with electric vehicles, cars powered by hydrogen fuel will drive around the world's roads. An ultra-efficient electrolysis plant is not exactly a free energy generator. It is quite difficult to assemble it with your own hands. However, the method of continuous hydrogen production using this technology can be combined with green energy methods, which will increase the overall efficiency of the process.
One of the undeservedly forgotten
Devices such as fuelless engines are completely maintenance free. They are absolutely silent and do not pollute the atmosphere. One of the most famous developments in the field of eco-technologies is the principle of obtaining current from the ether according to the theory of N. Tesla. A device consisting of two resonantly tuned transformer coils is a grounded oscillatory circuit. Initially, Tesla made a free energy generator with his own hands in order to transmit a radio signal over long distances.
If we consider the surface layers of the Earth as a huge capacitor, we can imagine them as a single conductive plate. The second element in this system is the ionosphere (atmosphere) of the planet, saturated with cosmic rays (the so-called ether). Through both of these "plates" are constantly flowing electric charges of different poles. To "collect" currents from near space, you need to make a free energy generator with your own hands. 2013 was one of the most productive years in this area. Everyone wants free electricity.
How to make a DIY free energy generator
Scheme of a single-phase resonant device N. Tesla consists of the following blocks:
- Two regular 12V batteries.
- A rectifier with electrolytic capacitors.
- An oscillator that sets the standard frequency of the current (50 Hz).
- Current amplifier block routed to output transformer.
- Converter of low-voltage (12V) voltage to high-voltage (up to 3000V).
- Ordinary transformer with winding ratio 1:100.
- Step-up transformer with high voltage winding and tape core, up to 30 W.
- Main coreless double wound transformer.
- Step-down transformer.
- Ferrite rod for system grounding.
All installation blocks are connected according to the laws of physics. The system is configured empirically.
Is it all true?
This may seem absurd, because another year when they tried to create a free energy generator with their own hands is 2014. The circuit described above simply uses battery power, according to many experimenters. To this the following may be objected. Energy enters the closed circuit of the system from the electric field of the output coils, which receive it from a high-voltage transformer due to the mutual arrangement. And the battery charge creates and maintains the electric field strength. All other energy comes from the environment.
Fuelless device to get free electricity
It is known that ordinary inductors made of copper or aluminum wire contribute to the occurrence of a magnetic field in any engine. To compensate for the inevitable losses due to the resistance of thesematerials, the engine must operate continuously, using part of the generated energy to maintain its own field. This greatly reduces the efficiency of the device.
In a transformer powered by neodymium magnets, there are no self-induction coils, and, accordingly, there are no losses associated with resistance. When using a constant magnetic field, the currents are generated by the rotor rotating in this field.
How to make a small DIY free energy generator
The scheme used is:
- take a cooler (fan) from the computer;
- remove 4 transformer coils from it;
- replace with small neodymium magnets;
- orient them in the original directions of the coils;
- changing the position of the magnets, you can control the speed of rotation of the motor, which runs completely without electricity.
Such an almost perpetual motion machine remains operational until one of the magnets is removed from the circuit. By attaching a light bulb to the device, you can illuminate the room for free. If you take a more powerful engine and magnets, the system can power not only a light bulb, but also other household electrical appliances.
On the principle of Tariel Kapanadze's installation
This famous do-it-yourself free energy generator (25kW, 100kW) is assembled according to the principle described by Nikolo Tesla back in the last century. This resonant system is capable of producing a voltage many times greater than the initial impulse. It's important to understandthat this is not a "perpetual motion machine", but a machine for generating electricity from freely available natural sources.
To obtain a current of 50 Hz, 2 square-wave generators and power diodes are used. For grounding, a ferrite rod is used, which, in fact, closes the Earth's surface to the charge of the atmosphere (ether, according to N. Tesla). The coaxial cable is used to supply a powerful output voltage to the load.
In simple terms, a do-it-yourself free energy generator (2014, scheme by T. Kapanadze) receives only an initial impulse from a 12 V source. The device is capable of continuously supplying normal voltage to standard electrical appliances, heaters, lighting, and so on.
Assembled self-powered free energy generator designed to complete the circuit. Some craftsmen use this method to recharge the battery, which gives the initial impulse to the system. For your own safety, it is important to consider the fact that the output voltage of the system is high. If you forget about caution, you can get a severe electric shock. Since a 25kW do-it-yourself free energy generator can bring both benefits and dangers.
Who needs all this?
Almost anyone who is familiar with the basic laws of physics from the school curriculum can make a free energy generator with their own hands. The power supply of your own home can be completely converted to ecological andavailable ether energy. With the use of such technologies, transportation and production costs will be reduced. The atmosphere of our planet will become cleaner, the process of the "greenhouse effect" will stop.
