There are situations in life when you have to resort to various methods to clean any surface. Very often, traces of adhesive tape appear on furniture, windows and doors. This happens when you need to attach something to a surface. And when the need is gone, you peel off the adhesive tape, but the glue remains. This is unpleasant not only because the surface becomes sticky, but also because dust and other rubbish stick to it, dirt accumulates. In this article, you will find the answer to the question of how to wipe tape from plastic and several ways to solve this problem.
Remove stains with duct tape
The most common way to remove adhesive stains from tape is the tape itself. The principle of "wedge with a wedge is knocked out" works here. However, this method does not always work one hundred percent, if, for example, the traces are already old.
If you use this tool, nothing bad will happen to the plastic surface. To wipe off adhesive tape stains on plastic, take any adhesive tape andcut off a small piece. Then, with sharp movements, stick it to the stain and tear it off. You need to do everything quickly so that the tape only has time to grab the glue from the surface, but not stick by itself.
Usually, this method works well with recent dirt. But if the adhesive cannot be removed, then take more serious measures.
Sunflower oil
How to wipe tape from plastic? The solution to the problem can usually be sunflower oil. You can also use any other vegetable oil you have at home (olive, linseed, grape), or even essential oils. But still, it is more economical to use sunflower oil for this purpose, since it is the cheapest.
To understand how to wipe off traces of adhesive tape from plastic, you need to try several methods and choose the right one. So, pour some oil on a foam sponge or cloth. Put it on the stain and leave it for a while. 15-20 minutes will be enough.
Oil works as follows. Under its influence, the glue is impregnated and increases in volume, therefore, moves away from the surface.
After the specified time, simply wipe off the remaining dirt with another rag or paper towel. The oil can be easily washed off with ordinary laundry soap.
Now you know how to wipe the adhesive from the adhesive tape from the plastic using vegetable oil. It will help solve the problem on surfaces other than wood.
Wipe the glue with alcohol
Alcohol is universal andeffective remedy. Not only will it not harm the plastic surface, but it will completely clean it of dirt.
If you're wondering how to wipe tape from plastic, look in the first aid kit. In any home there is medical, ammonia or alcohol tincture. You can also use vodka.
Alcohol will not only help remove glue from the surface, but also bleach the plastic if it turns yellow. Take a cotton pad and soak it in alcohol. Apply product to stain.
Most often this method is used for cleaning plastic windows, and not only for frames, but also for glass. Even special glass cleaners are alcohol-based.
Remember, never apply alcohol to a painted surface. The product may dissolve the paint.
Stationery eraser
Many may not believe, but the solution to the question of how to wipe the tape from plastic can be an ordinary stationery eraser or, as it is called in another way, an eraser. It cleans wooden or plastic surfaces easily and easily.
There are no tricks to use here. You just need to take an eraser and rub the glue stain until it disappears. Double-ended erasers or pen erasers work even better as they have a hard texture.
When the dirt is removed, there may be a rubber mark left. There is no need to be afraid that a new spot has appeared in place of the old one. It's easyremoved with a damp cloth, preferably from natural fabrics that absorb moisture well.
Soap
Soap, especially household soap, is a folk cleaning agent that has been used since ancient times to clean various contaminants. Surprisingly, soap can even remove tape marks.
Dilute a little soap in water so that a solution of sufficient concentration is obtained. Now soak a piece of cloth or sponge in the product and rub the dirt left by the tape. If the plastic thing is small and can be immersed in water, then it will be more convenient to leave it for a while in a soapy solution. So the stain will go away by itself, and you just have to wipe the surface.
Cleaner
Among other things, in solving the problem, how to wipe the adhesive tape from the plastic, dry detergent will help. If there is none in the house, try using soda, it also works like a scrub.
Of course, if this cleaner is used incorrectly, it can damage the surface, leaving scratches. But there will be no harm if you act like this:
- Wet the sponge and sprinkle powder on it.
- Press on the stain and leave for a while to soak the dirt and become more pliable.
- Erase the glue gently. You can not rub the stain with force - this is what injures the plastic and any other surface.
- When finished, wipe with a clean, damp cloth to remove any remaining cleaning powder.
Hair dryer
How to wipe double-sided tape from plastic? Perhaps not many people know that it can be removed with a hair dryer.
So, clean up according to the following steps:
- Plug in the hair dryer. The main thing is that it reaches the place of contamination.
- If your hair dryer has several modes, then you need to set it to high power. Medium is enough if you are afraid of overheating the device.
- Now turn on the hair dryer and point it at the double sided tape. You need to hold as much as possible, at least three minutes. Especially warm up the edges of the tape - in these places the tape sticks most strongly.
- Turn off the hair dryer, pry off the corner of the tape with a flat plate or fingernail. The adhesive tape should immediately come off about half. You can carefully tear it off, or warm it up again so that it moves away by itself.
The non-sharp side of a small knife or a children's plasticine spatula will do as a plate.
Vinegar soap solution
If you are still wondering how to wipe double-sided tape from plastic, then improvised tools that are usually found in every home can help you. It's vinegar, soap and water.
Prepare the solution. This will require 270 g of water and 60 g of vinegar. This amount is equivalent to two cups and a quarter of a cup, respectively. Add some liquid soap to the solution.
With a sponge orrags soaked in the solution, remove the tape by rubbing the dirt in a circle. Be careful not to rub too long or increase the percentage of vinegar as there is a risk that the surface will fade.
However, you have nothing to fear if the plastic (or any other) surface is white. From the vinegar-soap solution, it will only look cleaner. By the way, vinegar is also widely used in glass cleaning - it not only removes dirt, but also makes the surface shine.
Melamine sponge
There is another tool in the fight against double-sided adhesive tape - a melamine sponge. In another way, it is sometimes called a magic eraser.
All you have to do is soak a melamine sponge in water. Then, simply rub off any remaining tape or glue residue. The Magic Eraser does a great job and you won't have to struggle with getting dirty for long.
This product is considered a mild abrasive. It must not be used on glass and surfaces that have been polished. However, you can safely clean walls and doors with a melamine sponge. Be aware that the magic eraser may slightly discolor the item that needs cleaning.
Many are wondering where you can buy this tool, because, perhaps, for some it is new. In fact, you can buy a sponge at a regular hardware store or a large home improvement supermarket in the cleaning products section.
Thus, do not panic if there is a trace of adhesive tape or double-sided tape on the plastic surface. Use the recommendations of this article, and such pollution will no longer be a problem for you.
