In the water of any pool, various microorganisms always appear over time, but at the same time, algae fruitfully multiply in it. They are blue-green in color and are cyanobacteria. Algae in most cases have excellent resistance to chlorine, since this substance cannot penetrate the dense shell that has formed, which is obtained due to their large accumulation. It was to combat large colonies of cyanobacteria that the Algitinn preparation for the pool was created. It is available as a liquid concentrate. Chlorine is still the best substance for algae control, although the required concentration is much higher than it would be required to kill microorganisms. At the same time, the right amount remains at a level that will not harm people who bathe.
Action of liquid concentrate
Substance "Algitinn" for the poolnot designed to kill algae. It prevents their growth. In addition, this effect lasts a large amount of time. As a result, the water in the pool is clarified. This effect is achieved by destroying the protective film of cyanobacteria, so the disinfectant does its job effectively. It is recommended to use the drug "Algitinn" for the pool before the artificial reservoir is heavily overgrown. But if, nevertheless, this happened, then in this case the liquid concentrate is an additional component that allows a large concentration of chlorine to fulfill its purpose. It is very easy to maintain a constant level of the substance in the pool, as it is not destroyed by exposure to sunlight.
Composition, impact on a person and the price of the product
The substance "Algitinn" for the pool is made on the basis of ammonium, or rather, from its quaternary compounds. Their composition contains 10%. The liquid concentrate is algicide and pH neutral. At the same time, it contains absolutely no chlorine, nor does it contain heavy metals. This, in turn, eliminates side effects for the human body, but at the same time with such indicators, its cost increases compared to other similar drugs.
Mixing Aids for Pool Fluid
With the help of a special measuring device, it is recommended to add the drug "Algitinn" to the water. Instructions for use of the product advises to usealso for these purposes an automatic device that allows the addition of a substance in controlled doses. Direct mixing of the algaecide with water takes place in the swimming pool itself. But at the same time, it must be remembered that such operations must be performed at the time when the circulation pump of an artificial reservoir is operating. In addition, the process is carried out exactly near the place where the liquid medium is supplied to the pool.
Drug "Algitinn". Instructions for using the product
One of the tips for owners of pools of any type is that the liquid algicide concentrate is recommended to be dissolved in water before adding to the swimming facility, and a separate container must be used. During this action, the initial concentration of the drug should be reduced by about 3-5 times. As a result of the performed processes, a solution is obtained, it must be combined with the water of the pool near the triska (nozzle). Such places are mainly gratings through which fluid is supplied from the circulation pump. You can also perform these actions in several places at once, but it is necessary to avoid direct contact with the filters if possible.
Algicide dosage recommendations
Today, there are several ways to treat the pool, which directly depend on the concentration of cyanobacteria in it:
- Processing as usual. During suchDuring the process, the drug "Algitinn" non-foaming is recommended to be added in an amount of 50 ml to an artificial reservoir, which belongs to the open type, and for an indoor pool, the dosage is 30 ml. In this case, the amount of the product is indicated for every 10 cubic meters of liquid. The procedure must be performed once a week.
- Processing by impact method. During such an operation, 150 ml of algaecide is added for every 10 cubic meters of water. The process is performed as needed.
- If a large amount of cyanobacteria has accumulated in the pool, that is, it is heavily overgrown with algae, it is recommended in this situation to initially treat the liquid medium with ten tablets of Chloritex for every 10 cubic meters of water. Then after about 10-12 hours, adhering to the same ratio, add 250 ml of algaecide. After performing this type of processing, a technical break is required, during which the artificial reservoir will not function for 12 hours.
| Drug doses, ml | The volume of an artificial swimming pool in cubic meters. | |||||
| 20 | 40 | 60 | 80 | 100 | 120 | |
|
Treatment in normal mode (for closed/open water) |
100/60 | 200/120 | 300/180 | 400/240 | 500/300 | 600/360 |
| Impact processing | 300 | 600 | 900 | 1200 | 1500 | 1800 |
Terms of Use
When Algitinn pool cleaner is used, basic safety precautions must be observed:
- Children should not have access to the drug.
- All people must avoid contact with the eyes and skin of the liquid concentrate.
- Products should not be taken internally.
- Algicide should not come into contact when used with other chemicals.
Opinions of customers about the drug "Algitinn". Reviews about it
According to consumers, the tool is quite simple to use. They recommend that before using it, perform an operation that allows you to backwash the filter. Then it is necessary to turn on the circulation pump, then add the required amount of chemical to the reservoir directly near the zone where the liquid medium is supplied. After that, the pool is preserved for 12 hours. In such a situation, being a colorless and odorless substance, like water, the Algitinn preparation for the pool has only good reviews from all the people who happened to use it. This method of using the drug almost completely corresponds to the process described in the instructions, so there is no doubt about the effectiveness of the method. In addition, almost all owners of artificial reservoirs use to clean tile edges andrubber rugs means "Algitinn" for the pool. Numerous reviews confirm this effectiveness of the use of the product. To achieve the best antifungal effect, it is necessary to prepare a working solution, which will consist of 500 ml of water and 100 ml of the drug.
