Ornaments and bizarre patterns of ceramic tiles today no longer surprise anyone. But sometimes you want to create yourself, and not hire professionals, you want to put your whole soul into the work. And then the question arises of how to cut ceramic tiles, and how to do it correctly. The need for this will definitely arise during the repair. After all, tiles have to be laid on large areas, on different surfaces, at different angles.
How to cut ceramic tiles?
The first thing that comes to mind is a glass cutter. This tool is useful for small jobs. And also if you need to quickly cut tiles. But large volumes of work are not subject to the glass cutter. After all, the use of this tool requires utmost care and concentration. It will take all the time to ensure that the incision is exactly in the right place. ATthe scale of the kitchen will be difficult to do all this. How to cut? Tiles must be placed on a hard, level surface. Now you can roll the glass cutter, directing it “towards you”. Press down evenly. As a result, a visible strip will remain on the surface. You only need to break the tile.
If the question of how to cut ceramic tiles is still not settled for you, try one of the varieties of tile cutter. It can also be used for large volumes of work. And you don't need to put in much effort. The tile cutter can be electric or manual. The latter is considered by many to be the most convenient and simple device. But a manual tile cutter will not cut a strip whose thickness does not exceed 6 millimeters: the edges will be uneven. But if you need to cut the whole into larger parts - this is ideal. The electric model will speed up the process as much as possible. It makes it possible to obtain thin stripes, curly patterns, and so on. One of the advantages of such a tile cutter is that the work is clean, because all the particles and dust settle in a special tank with water.
How to cut ceramic tiles with a tile cutter? Consider a handheld device. The tile is fixed inside it. You must keep it level and move the wheel "away from you" to the edge. Distribute pressure evenly. But if you press hard, the tile may crack. At the end, you need to press the handle of the device. As a result, the tile will break evenly. You need to use the electric model in approximately the same way.
How else to cut ceramic tiles? Possibly Bulgarian. This device combines the advantages of the two "brothers" described above in terms of purpose. The cutting speed will be high, and it is very easy to apply it. Even an inexperienced repairman will understand how to cut ceramic tiles with a grinder. However, the grinder also has disadvantages. The cut edge is often uneven and needs to be processed. In addition, you will find a huge amount of dust. Be sure to wear goggles and a respirator. And how to cut ceramic tiles with a grinder? The mechanism of action is similar to a glass cutter. Plug the device into a socket, press the "Start" button. When the disk picks up sufficient speed, get to work. You need to move "from yourself". Here you need to be extremely careful. A single awkward move can lose a pair of fingers.
Thus, cutting ceramic tiles is within everyone's power. All you need is the right tool and a little skill.
