In modern construction, the phrase "cement particle board" is quite common. How to cut a DSP board? This question is asked by many who have encountered this material. You can cut this material using circular or band saws. In this article, we will talk about sawing methods, as well as give some useful recommendations.
Feature and advantages of material
- Functionality. DSP panels are the main element in the construction of frame-panel structures, they are necessary for sheathing the frame base outside the walls. In addition, with their help, the lining of the internal partitions of buildings is produced. They are necessary for leveling the flooring without the use of bulk technologies or other traditional methods of installing floors. They are also used to install window sills in buildings in different areas - residential or office. Window sills made of such material will not yield to their counterparts made of wood, butstrength they are better than plastic models. Thanks to them, they produce communication boxes, porch canopies, mount tracks for the building.
- Cement particle board is a really durable material, which is determined by the production technology: elevated temperatures contribute to the manufacture of a monolith that can withstand huge loads. If the material is bent, no more than 10% will be deformed.
- Machinability. Such panels are easy to saw, cut, grind, mill and other actions. The work uses tools like a drill for steel, a grinder or a circular saw.
- Moisture resistant. The mineral elements contained in the material and the smooth coating make the product resistant to moisture. But slight indicators of swelling are still present: immersing in a liquid for a day, the product will only swell by a couple of%. It is for these purposes that there are minimal gaps between the plates. The even coating allows water to evaporate quickly, so the sheets are often used to create moisture-resistant walls, arranging sanitary rooms in public buildings.
- Sustainability. DSP is an absolutely environmentally friendly material that does not include formaldehydes, phenols, carcinogenic mixtures and toxic substances are excluded here. Cooker panels do not accumulate electrical charges.
- Resistant to fire. Cement particle board is a material that is difficult to ignite and burns poorly. Even when ignited, the fire will go slowly and be located only in the areathe fire itself. When smoke appears, the release of toxic substances is excluded.
- Resistant to low temperatures. TsSP possesses the best frost resistance. This is an important indicator for construction in Siberia or the regions of the Far North.
Sawing DSP
Cement particle board, or DSP in other words, is a building material that is now often found in construction work. Due to the fact that the element is made of aluminum, it has high strength and wear resistance. These boards are the perfect combination of the best characteristics of wood and cement. TsSP than to cut? For sawing, the main thing is to use a cutting device with high strength, it is recommended to give preference to hard alloys. The process will create dust, so you need to protect the respiratory tract.
How to cut a DSP board without chipping at home? Such material is well cut, ground, drilled, and also milled to meet the needs of installation at a particular facility. To cut the plate, just a hand or electric saw with a tungsten and carbide blade is enough. For proper drilling, you will need screw drills with high speed. The best method is a factory environment where special equipment is available.
Sawing Methods
DSP than sawing? Suitable sawing methods for cement bonded particle boards include:
- Transverse or portable circulardrinking.
- Hacksaw (machine) or machine (formatted).
How to cut a DSP board without chipping? It is important to immediately process the edges during installation and apply protection products. The installation of cement-bonded particle boards often involves many holes for fixing. These actions are best done with a drill with a torque of about 220 revolutions in 60 seconds. You will also need steel drills or a portable drill press with tungsten drills.
Recommendations
How to cut DSP board? If there is no desire to make holes in the cement particle board, then the coatings must be fixed exclusively with self-tapping screws. In terms of strength, they are better than wood chip coatings, but you can work with them with similar devices. TsSP than to cut? As a professional processing, tools, cutting surfaces made of hard alloys should be used. Cutting the board to size can be carried out at the factory at the request of the customer. If it is necessary to cut the coating at the installation site, it is advised to use a cutting tool with tungsten carbide inserts.
Important! It is necessary to think in advance about the suction of dust and sawdust from the milling area. Cement particle boards have an even and smooth finish, so sanding is not done at the factory. In addition, this treatment of the entire surface of the board will knock off the top coating, and the structure of the product will be exposed. This contributes to an increase in water absorption, and subsequently a decrease in physical and mechanical characteristics.
Tips fromdust-free sawmills
How to cut a DSP board without dust? To prevent or reduce the amount of dust from cutting products, you can use the following means and methods:
- The plate must first be wetted. Wipe with a damp cloth, cut slightly and wipe again.
- A power saw with a blade will give much less dust than a standard angle grinder.
- You can take a jigsaw, find an old vacuum cleaner that will have a dust collector. The bag must be disposable. The vacuum cleaner must be turned on, directed to the area where you work. It is advisable to find an assistant. By pre-spraying the parts with a sprayer, dust generation can be reduced to a minimum.
Necessary equipment and supplies
DSP than sawing? First of all, due to the large weight, the sound will not provoke the resonance of a plate weighing 50-70 kg. Products are easy to break. Cutting long models will be tedious. Plates should be cut with a grinder that has a cutting wheel for concrete or stone. Cement particle board is in fact a layer of concrete, only thin and with a slight addition of wood. Often, insulation is used as a coating on the outside for a hinged ventilated facade.
DSP facade: material characteristics and installation method
What is the best way to cut DSP panels? Plates with a minimum thickness will break quickly. Products can be carried exclusively on the edge, and they are folded only in a horizontalposition. Insulation for the facade is used mainly in rigid models. With a step of no more than 60 cm, the brackets are fixed to the main wall. The plates are installed on several fungi, after which they are protected with a wind barrier. There should be gaps of about 4 mm between the tiles.
Algorithm of actions and tips
If necessary, it is advised to cut the cement-bonded particle board with a circular saw or a machine, saw blades are suitable as an analogue. The plates must necessarily be made of hard alloy. DSP boards are made in such a way that they have a smooth gray finish, suitable for priming and further painting without puttying. The strength of the product does not depend on the area of application and deformation, namely, it does not depend on whether the tile is fixed in a transverse or longitudinal format. The product is monolithic, will not delaminate, it is unstable only to the atmospheric factor.
When constructing any building, safety and environmental friendliness will be a priority. The thicker the plate, the more difficult and dangerous it will be to work with it manually. The slabs have a smooth finish, and their thickness is about 8-36 mm.
Cement particle board is a new and modern material that is often found in the construction industry. It combines the best properties of wood and cement. Such products can be not only a surface, but also suitable as a material for the walls of a frame building. They have excellent durability.
