Each repair is a troublesome business, which is accompanied by considerable expenses. Especially if in the course of work it is necessary to establish a system of water-pressure structures. You can't do without plumbing elements here, and when it comes to wall-mounted faucets, you should not skimp, but it is better to choose high-quality products that will not disturb you with problems.
Plumbing elements. Their types
Rooms such as the bathroom, toilet and kitchen all require a plumbing system. It is simply impossible to imagine the listed premises without beautiful plumbing, which will focus on itself. These items are:
- faucets;
- shells;
- showers;
- toilets;
- baths;
- showers.
It is the faucets that attract the eye with their appearance, non-standard shape and versatility. They are a highlight in the interior of the bathroom or kitchen. And they are divided into the following types:
- Compact. This type is most often used in shower cabins with a faucet-shower switching system.
- For the bath. Crane with one or twovalves is attached to a special hole, which was prepared in advance in the bath.
- For sink. Just like in the bathroom, there must be a special hole for installing the faucet.
- Wall-mounted basin and bath faucet. The most common type, for the reason that not all bathtubs and sinks have a hole for installing a built-in faucet and it is installed in the wall. This is also a minus: to install it, you need to crush the walls and lay the water supply and sewer system.
Wall faucet
Wall-mounted faucet, in turn, is classified by spout length:
- short;
- medium;
- long.
The spout has a variety of shapes and can be equipped with a filtration chintz. It is used for both sinks and bathtubs. When choosing a wall-mounted faucet, it is best to pay attention to a two-valve faucet: it will be possible to connect both cold and hot water - this element is simply necessary for a bath. Also in the bathroom it will be convenient to use a stationary shower hose with the function of switching the water supply in the spout and in the shower head.
Multifunctional wall faucet
In the modern construction market and in stores specializing in plumbing, there is a fairly extensive range of this product. Its versatility can be distinguished due to the fact that the wall-mounted faucet is divided into types:
- Wall-mounted basin faucet. Designed for installation in walls, during which a water pipe is laid in the wall and, accordingly, a sewer system. But nevertheless, this element of plumbing looks quite aesthetically pleasing and modern. It is very convenient to carry out these works in the kitchen. Thanks to the fact that the space in the cabinet for the sink is freed up, you can equip it to suit your taste preferences and needs.
- Concealed wall mounted basin faucet. This species is considered one of the most expensive and rare. These products are made exclusively by branded manufacturers from the highest quality materials. Often you have to pre-order this type of faucet or visit hypermarkets, where the range of plumbing is extensive. Basically, this type involves the presence of one or two levers that are separated from the main spout, but also built into the wall with it.
- Single-lever wall-mounted basin mixer. Among the entire range, this type is considered the most affordable and most common. The downside is that the gasket in it is quickly erased and the faucet begins to leak water outside the spout, so the sanitary gasket needs to be replaced regularly.
Which faucet to choose: at an affordable price or the best quality - it's up to the buyer to decide, and the article can suggest a few recommendations for a better choice.
Recommendations when choosing plumbing
- Be sure to check the integrity of the goods and worthy when buyingappearance, in the construction markets, the original product can often be replaced with a supported product. You should pay attention not only to a clean matte surface, but also try to look inside the faucet - it must be the same color and from the same material as the surface of the product.
- It is necessary to pay attention to the material of manufacture. Most commonly used:
- aluminum (service life no more than 6 years);
- brass (considered one of the best materials);
- copper.
3. The stories of sales consultants do not always justify the essence of the quality of the selected product. In order to ascertain the quality of the products, the buyer has the right to request quality certificates, which must be attached to each wall-mounted faucet.
The faucet is the main component in the plumbing system of every home. For this reason, his choice must be approached thoroughly and thoughtfully, because he must serve in the house for decades.
