Self-leveling self-leveling floor is a type of screed, the main feature of which is the possibility of pouring a layer of different thicknesses. This technology has alternative names: leveling screed, filler floor, and self-leveling mixture. During the work, the finished composition self-levels, spreading evenly over the surface. At the same time, there are no cracks and gaps, as well as air bubbles and height differences. If you will be laying a self-leveling floor, the price per m2 should be of interest to you.
Use area
The ability to form an almost perfect surface determines where such a floor is used. As a rule, this is a finishing leveling screed before laying floor coverings such as laminate, carpet, ceramic tiles, strip parquet and parquet board.
Varieties of self-leveling floors
On sale you can find self-leveling compounds that are used to equip the finish coat. This ismatte and glossy self-leveling floors, as well as 3D surfaces that imitate natural materials, stones, and sometimes are represented by multi-colored patterns. Working with such compounds is not so difficult, so you can make a self-leveling self-leveling floor with your own hands. However, first you need to decide which brand to choose, as well as familiarize yourself with the characteristics and reviews in more detail.
Features of the Starateli brand floor
Visiting the store, you can choose one of the varieties of quick-hardening floor "Prospectors". As one of the options, a quick-hardening floor can be distinguished, which is used to eliminate significant irregularities. For a 25-kilogram bag you will have to pay 315 rubles. However, consumers are interested not only in the cost, but also in the quality characteristics that are characteristic of the mixture.
Thus, the compressive strength reaches 15 MPa, the composition can be applied with a layer of up to 100 millimeters, and it is intended for internal work only. Already 4 hours after pouring, the surface can be used by moving on it. In its thickness, you can lay a warm floor.
It is necessary to carry out work at normal humidity, which also applies to the period of operation. It is recommended to lay the composition on reinforced concrete or concrete, as well as a rough cement screed. You can use the surface as a thick self-leveling floor, which will replace the rough coating. It is possible to lay natural stone, piece parquet, linoleum, floortiles, laminate, and carpeting. The composition is universal in terms of application method, laying technology can be mechanized or manual.
Reviews on the quick-hardening system "Prospectors"
Quick-hardening floor "Prospectors" has a light gray color, its minimum thickness can be five millimeters. According to users, the time recommended by the manufacturer (40 minutes) will be enough to cope with the work. It is necessary to carry out manipulations at a temperature of +23 degrees. After 28 days, the screed will reach the above compressive strength.
Buyers like that the composition is economical, its consumption can be equal to the limit from 13.5 to 14.5 kilograms per square meter. This is true for a layer thickness of 10 millimeters. Home craftsmen advise using this composition for arranging the floor, which is supposed to be used in moderately wet or dry rooms. As a base, you can use not only cement, but also anhydrite, as well as gypsum surfaces, the strength of which is 150 kilograms per square centimeter or more. Before starting work, all cracks, seams and joints are recommended to be repaired. A universal primer is applied to the surface, which dries for an hour. Along the perimeter of the room, along the walls and near the columns, it is necessary to fix the damper tape.
Characteristics of the thin self-leveling floor "Prospectors"
If you need a self-leveling self-leveling floor, you can choose the composition to create a thin base. It is designed for final leveling and is called a thin floor. For a 25-kilogram bag you will have to pay 400 rubles. The mixture can be applied in a layer ranging from 1 to 20 millimeters. After 4 hours the surface can be used. The mixture has excellent spreadability upon application.
As a distinctive feature of this floor is the ability to use it at high humidity. The material has minimal shrinkage, and after 28 days it can be 0.1%. If the thickness of the self-leveling floor is equivalent to 10 millimeters, then the average consumption will vary from 14 to 15 kilograms per square meter.
Reviews on the thin floor system from the Starateli company
If you decide to use a thin floor for work, then you need to rid the rough base of grease stains and other contaminants. When it comes to dealing with highly absorbent substrates, their priming is carried out again after applying the first layer of the appropriate mixture. According to users, it is very important to properly prepare the composition for forming a thin floor. To 9 liters of cold clean water, add 25 kilograms of dry material, and then mix manually or with an electric mixer for 5 minutes until a homogeneous current mass is obtained. The composition is left for 5 minutes, then mixed again. Importantavoid water overdose.
Self-leveling self-levelling floor, reviews of which are important to read before visiting the store, is easy to apply. This process can be carried out with a pump or manually. If necessary, a needle roller can be used to level the surface. Home craftsmen advise during the hardening period to exclude direct sunlight and the formation of drafts. It is recommended to start laying the top coat 7 days after completion of work, the waiting period will depend on the thickness of the self-leveling floor layer. If we are talking about porcelain stoneware, ceramic tiles or natural stone, then the installation of these materials can be started only after three days.
Characteristics of the self-leveling floor Bergauf
The Bergauf self-leveling self-levelling floor is also popular with consumers. Having visited the store, you can pick up one of the varieties of self-leveling floors. For example, Boden Inter Gross is a fast-acting mix that can be used by hand or machine and is non-shrinking and non-cracking. If you are not familiar with the mixtures described, then you should choose Eeasy Boden, which cures quickly, is easy to install, and is also crack resistant.
It will be possible to move on such a surface in 8 hours. To form a screed, the thickness of which will vary from 5 to 60 millimeters, it is worth choosingBoden Zement Medium, this composition is used as the basis of a floor covering with a heat-insulating layer. It is widely used, as it can be used as early as 4 hours after styling.
Reviews on the Knauf Tribon self-leveling floor system
As users emphasize, this composition can be used to create a screed with a thickness of 10 to 60 millimeters. This mixture is a universal composition based on a complex mixed binder, as well as special modifying additives and quartz sand. The latter is used as a placeholder. According to novice craftsmen, it can be argued that this solution is an excellent solution for people who are just starting to gain experience in repair and construction work. This is due to the fact that the composition has an extended pot life.
It will be possible to load the floor after 24 hours, and it is permissible to walk on it after 6 hours. The screed does not shrink and is also resistant to cracking. The Knauf Tribon self-leveling self-leveling floor is environmentally friendly, as it contains only safe materials that do not contain substances harmful to human he alth. This advantage quite often leads consumers to choose the described floor leveling system.
Glims S-Level roster reviews
Glims S-Level self-levelling floor, reviews of which are the most positive, can be purchased by you for 490 rubles. Such a cost will have to be paid for a 20-kilogrambag. Mixtures are produced in Russia, therefore they are common in the domestic market. According to users, the claimed consumption of 1.5 kilograms per square meter with a layer thickness of 1 millimeter is true.
It will be possible to equip this system, as well as operate it, in rooms with normal humidity and in the bathroom. The layer thickness can vary from 2 to 30 millimeters, and parquet board, linoleum, tile or laminate can be used as a topcoat. Home craftsmen emphasize that when arranging a layer of 10 millimeters, it will be possible to move on its surface within 4 hours after pouring. This self-leveling self-leveling floor can be used as a rough base for linoleum, which is recommended to be laid after 5 days. The same recommendation applies to laminate and parquet boards. But the tile can be mounted after three days.
Cost of work
If you don't want to lay the self-leveling floor yourself, the price per m2 should be of interest to you. On average, it is 400 rubles, with regard to thin-layer coating.
