How to choose a well submersible pump? Many experts recommend trusting only trusted brands. The performance parameter for low-power models does not exceed 230 cubic meters. meters of water per hour. Pushers in devices are used in various lengths.
An adapter is used to connect the pump. The dowel pins can be with or without clips. Rods are integral elements of pumps. They are located in a horizontal or vertical position. A high-quality submersible pump costs around 12 thousand rubles.
Pump specifications PEDROLLO 4BLOCKm2/20
This well pump (submersible) is suitable for wells of various depths. The piston itself in the device is on the lining. If you trust the words of experts, then his move is quite large. The weight of this model is 12 kg. The coupling in this case is designed for a pressure of 8 N. The pushers in the device are located behind the valves. The feeding mechanism is provided with an expander. The return spring is not very large.
The plunger device is behindholder. The model is connected via an adapter. The stand at this pump is made entirely of stainless steel. The presented submersible pump operates at a frequency of 60 Hz. If you trust the reviews of experts, then lubricating the valves is quite simple. The pressure in the plunger mechanism is maintained at 3 bar. The pump protection system is second class. This well pump (submersible) costs around 13 thousand rubles.
Reviews about the model PEDROLLO 4BLOCKm2/22
The indicated pump (submersible well) reviews, as a rule, receive a positive character. Many experts praise him for his quick turn-on. The plunger mechanism is located behind the holders. If you trust the reviews of experts, then swapping is carried out quite quickly. The overload indicator is at around 14 N. To service the devices, keys of various sizes are used. The rod of the presented pump is located behind the piston.
The camera in this case has a length of 35 cm. The pusher is located behind the counter. The performance indicator is exactly 130 cubic meters. meters of water per hour. For wells of 10 meters, the model fits perfectly. The pumping device is used with a holder. The protective ring at the pump is installed behind the rod. It is made entirely of cast iron. According to experts, the frequency of the pump is well maintained. Problems with pumping water are observed infrequently. The piston diameter of the modification is 3.3 cm.
The return spring of the mechanism is used without a clamp. Filters at the pump specifiedseries are missing. It is also important to note that the model uses only one rod. In order to monitor the parameters of the device, it is allowed to connect a pressure gauge. The coupling in the device keeps the maximum pressure at 3.4 bar. In stores, the presented well pump (submersible) is sold at a price of 9 thousand rubles.
Gileks modification parameters
Submersible well pump "Dzhileks" has a wide variety of reviews. Buyers praise it for its practicality and compact dimensions. The stand in this case is made of stainless steel. In this case, the pushers are made entirely of cast iron. It is also important to note that the model has only one piston. In diameter, it is exactly 3.5 cm. For wells of 5 meters, the model fits perfectly. The performance of the modification is at around 210 cubic meters. meters of water per hour. A standard set of keys is required to service the device.
The feed mechanism of the model is made with one holder. Clamps at the rack are able to withstand a large load. The pump of the specified series operates at a frequency of 65 Hz. The camera of the model is of single-channel type. The width of the holder is 2.3 cm. The modification does not have a pumping handle. If necessary, the pressure gauge can be connected via a connector. The pump of this series also does not have a filter. The model costs no more than 10,200 rubles on the shelves.
Reviews on the Divertron 1000
Divertron 1000 well submersible pump is designed for deep wells. The seal in the device is used with overlays. Water supply mechanismmade with one camera. The clutch of the model copes well with overloads. This pump does not have filters. The performance of the modification is no more than 230 cubic meters of water per hour.
For wells of 20 meters, the pump of this series fits perfectly. The pressure gauge may be connected via a contact adapter. To service the modification, it is important to understand the plunger device. The clutch in this case does not need frequent lubrication. Judging by the reviews of experts, the bar is rarely erased. You can find a pump of this series in stores at a price of no more than 11 thousand rubles.
Pump specifications Wilo TWU 3-0115
The specified submersible well pump with automatics is suitable for wells of various depths. The piston in this case is used with a holder. Reviews from users and experts claim that it rarely breaks. The paging mechanism is set to a single-chamber type. The channels in the device are rarely clogged. The model of the indicated series does not have a fitting. The pins are located near the coupling. The length of the plunger is 21 cm. The valves of the model are inside the channel.
The connecting hose is used in the braid. The model is great for wells of 10 meters. The maximum pressure at the pump is 4 bar. The feed mechanism can withstand quite large overloads. The pressure gauge can be connected via an adapter. Experts and owners of the model confirm in their reviews that the stand is well protected. The plunger device is located behind the piston. The expander itself wears out very slowly.
It is important to note separately that the sealingthere is no bushing in the device. The model weighs quite a lot, and transportation may be a problem. The pushers of this pump are connected to the bracket. The rod of the model is made entirely of stainless steel. In service, the device is quite simple. You can buy a model of this series in a specialized store at a price of 8700 rubles.
Modification parameters Wilo TWU 3-0123
The specified submersible well pump is very popular. What are his parameters? Experts note that his stand is made with a high-quality clip. The piston of the modification is used by 2.2 cm. The pushers in the device are installed above the holder. The return spring of the modification is capable of withstanding a pressure of 3 N. Judging by the dissatisfied customer reviews, the model is not suitable for wells of 15 meters. But for wells of 10 meters, it is ideal.
The anti-pumping protection system is applied to the third class. Modification filters are used only with lining. The fitting at the mechanism is installed in the upper part of the structure. The sealing sleeve reliably protects the piston. If we talk about the characteristics of the device, it is important to note that the power of the equipment is 4 kW. Due to this, the performance of the model is high. The rod in the device is made entirely of cast iron. The mass of the indicated submersible pump is 12 kg. There is a modification on the market for about 8300 rubles.
Wilo TWU pump specifications3-0124
The indicated submersible well pumps for water supply are characterized by a large stand. According to customer reviews, the piston is of high quality. The coupling of the modification is used with a handle. The bar in this case is made of cast iron. The piston has a sealing sleeve. In maintenance, the pump of this series is quite simple. For wells of 15 meters, the model fits well.
The pressure gauge can be connected to the device through an adapter. It is located next to the pushers. The connector of the modification is made entirely of stainless steel. The booster valve is designed for a load of 3 bar. The pins of the modification are located near the adapter. The pump of this series costs within 10200 rubles.
Reviews about the model Wilo TWU 3-0136
This submersible well pump has fairly high performance. The power of the unit is at around 5 kW. The device operates at a frequency of 55 Hz. Experts say that the modification is connected quite simply. The coupling in the pump is located near the chamber. The piston of the device is designed for a pressure of 2 bar.
Adapter for a pressure gauge in this case, a contact type is used. The fitting is installed with a protective washer. The performance of the modification is no more than 250 cubic meters of water per hour. The dowel pins wear out very quickly. However, you can easily replace them. The stand directly at the pump of this series has a length of 25 cm. According to many buyers, the chamber rarely gets dirty. Pumping protection is second class. Limit pressure on the plungerdevice equals 2 bar.
The modification's filter is under the camera. The holders in the device are made of cast iron. Their thrusts are not very big. For wells of 20 meters, the modification fits well. The hose in this case is connected to the pipe. The booster valve is located in the chamber. The linings of the presented pump are made of polymer. You can buy a model of this series in our time at a price of 12,300 rubles.
Parameters of the well modification Wilo TWU 3-0138
This submersible well pump (water jet) is produced with two chambers. He uses a piston with a diameter of 3.4 cm. If you trust the reviews of experts, then it wears out slowly. It is also important to note that the pump has a compact stand. The holders themselves are made entirely of cast iron. The modification has no lock. The connecting hose is 12 cm in diameter. The dowel pins have good strength.
The rated power of the pump is 5 kW. An overload of 3 N can not withstand the model. In maintenance, the device can hardly be called simple. First of all, it is important to note that it is problematic to remove pushers. The grease on the plunger mechanism does not hold well. The sealing sleeve sometimes cracks and wears out quickly. The return spring on the pump is not of good quality. The model of this series costs about 10300 rubles.
Grundfos submersible pump specifications
The Grundfos well submersible pump is suitable for wells of 10 meters or more. If atrust the reviews of experts, then his racks are designed for heavy loads. The modification piston itself is set to 3.3 cm. The feed mechanism is located at the bottom of the structure. Filters in this case are of high quality. The camera of the model is not very wide.
The coupling of the presented pump withstands a pressure of 4 bar. According to experts, problems with pushers are rare. The pressure gauge is connected to the modification through a connector. The hose on the model is attached with a diameter of 0.5 cm. The return spring is used with a holder. The plunger device is mounted on a clamp. The maximum overload index of the pump is 2 N. In this case, there is no sealing sleeve above the stand. This submersible pump costs about 12,300 rubles
Reviews on the well submersible model Water Horse
This submersible pump has one piston. Its stand is made of stainless steel. In total, the model has three cast-iron pushers. If you trust the reviews of experts, then the sealing sleeve is able to withstand heavy loads. The width of the adapter is 3.5 cm. The handle in this case is not provided by the manufacturer. There is an expander in front of the adapter.
There is no pressure gauge in the standard kit of the indicated pump. The rod width is 3.4 cm. Two filters are installed to clean the channel. If you trust the reviews of experts, then they are very rarely clogged. The coupling deserves special attention. In this case, it is made with two clamps. There is a model in the areaRUB 11300
Reviews about the model SPERONI SP 50-10
This submersible pump has one piston. Its stand is made of stainless steel. In total, the model has three cast-iron pushers. The sealing sleeve is able to withstand heavy loads. The width of the adapter is 3.5 cm. The handle in this case is not provided by the manufacturer. There is an expander in front of the adapter.
There is no pressure gauge in the standard kit of the indicated pump. The rod width is 3.4 cm. Two filters are installed to clean the channel. Users note that they are very rarely clogged. The coupling deserves special attention. In this case, it is made with two clamps. The model costs around 11,300 rubles.
Parameters of SPERONI SP 50-12 well modification
The borehole pump of this series is produced with a long fitting. Judging by the numerous reviews, the mechanism is set up quite simply. It has a stand with a diameter of 6.7 cm. The pushers are located at the bottom of the chamber. The valve for pumping in the device is able to withstand heavy loads. It is allowed to connect the pressure gauge directly through the connector.
It is also important to note that the modification has a high-quality piston. His move rate is quite high. The impeller deserves special attention in the mechanism. The sealing ring on it does not need frequent lubrication. The height of the pusher is 4.4 cm. The model has wired adapters. This submersible pump operates at a frequency of 65 Hz. You can find the presented goods on the shelves byprice from 12 thousand rubles.
Characteristics of the SPERONI SP 50-14 submersible pump
The specified submersible well pump is in demand. The plunger is small. As the buyers of this model note, the piston stroke reaches a maximum of 22 cm. The adapter for connecting to the pump is installed at the bottom of the structure. The rod in this case is used with a protective washer. The fitting is located directly on the gasket. The power limit indicator of a submersible pump is at a loss of 5 kW.
Modification works at a frequency of 60 Hz. The pumping protection system is applied to the third class. The long stand deserves special attention. The camera is available with one channel. The pushers in the device are arranged in pairs. The pressure gauge is connected to the connector as standard. The presented modification for wells costs around 13,400 rubles.
Reviews on the well model "Baby"
The water pump "Baby" differs from other models in its high stand. The adapter in this case is behind the pushers. It is also important to note that the modification uses a high-quality plunger. His head is made quite wide and holds pressure well. The piston is directly under the chamber, and problems with it are quite rare. The return spring of the model of this series is capable of withstanding an overload of 3 N. It is also important to note that this submersible pump has a clamping flange.
The washer under it is selected not of a very large diameter. Filters near the valves are used with meshoverlay. The pressure gauge is connected to the specified submersible pump without problems. The coupling in this case is fixed on the rack. The power limit indicator for this submersible pump is 7 kW. The mechanism of the specified series works at a frequency of 50 Hz. You can buy a water pump "Kid" in stores at a price of 12 thousand rubles.
Pump totals
Given the characteristics of the above models, the rating of well submersible pumps is as follows:
1. Grundfos.
2. SPERONI SP 50-14.
3. Wilo TWU 3-0124.
4. PEDROLLO 4BLOCKm2/22.
5. SPERONI SP 50-10.
Each model has its own advantages. The choice depends on the expected depth of the well and the desired power of the device.
