Renovation is a big adventure for someone. And at times there are people who are trying in every possible way to avoid it or delay the onset of change. And as soon as the process is launched, various questions begin to meet along the way, which need to be answered. The most common of them is which gypsum plaster is better. After all, without it it is impossible to repair walls, floors and ceilings. Today we will look for the perfect blend of quality and price.
Plaster or not plaster
Walls need to be leveled before wallpapering or simple painting. This is especially necessary if there are large cracks or chips. Here, before many, the question arises, which plaster is better: gypsum or cement? Let's look at the first kind first.
It is worth mentioning right away that this type of mixture is used for plastering small sections of walls. This is due to the fact that it quickly freezes. If this fact does not scare you, then experts advise preparing a solution in a small amount usingconstruction mixer. This process goes like this:
- The required amount of water is poured into the selected container.
- Dry mix added.
- Stir thoroughly until all lumps are completely dissolved.
And then everything is simple:
- The finished solution is sprayed onto the wall with a spatula.
- Spread evenly over the wall.
Pro Tips
If you know which gypsum plaster is best for you, then you should use some recommendations:
- Before each new mixing of the solution, the remnants of the container must be removed and rinsed thoroughly. Solidified particles will adversely affect the quality of mixing the mixture.
- Prepare the solution according to the instructions on each package.
- Choose the right tools for working with gypsum mix. You should have two spatulas prepared: a short one and a long one.
- If you are going to plaster the walls with such a mixture, then make sure that they are not painted with oil paint. If it is not possible to clean the surface from it, then it is necessary to apply notches along the entire wall. They will serve as the perfect bond between the plaster and the surface.
- If you want to achieve a perfectly flat wall, then after applying the plaster, spray it with water from a spray bottle. After this procedure, carefully polish the surface with a long metal spatula, preferably stainless steel.
Producers and prices
If you stopped your attention on the plaster, then you can safely go to the store. And here the eyes begin to diverge from the variety of manufacturers. Among them you can find the following brands:
- Henkel;
- Knauf;
- Ivsil;
- Unis.
Among the well-known foreign brands, you can also meet domestic manufacturers. For example:
- "Volma";
- "Bolars";
- "Founding";
- "Glims".
It is worth mentioning the price of plaster. It comes from the following parameters:
- appointment of the mixture;
- composition;
- Terms of use.
I wonder which gypsum plaster is better: "Knauf" or "Volma"? It is difficult to give a definite answer. This is due to the fact that:
- "Knauf" has a wide range of components and quality additives, although the price will be high;
- "Volma" has the same properties as the German competitor, only at a lower cost.
Dry plaster is sold. Packed in bags of 25 and 50 kg. The cost of one package can be up to 400 rubles. Let's summarize all of the above. Need to treat a small surface? Gypsum plaster is selected. Which is better? See for yourself depending on your financial capabilities and the place of alignment. All of the above manufacturers will answer your main question, which gypsum plaster is best for walls. All of them are approximatelyhave the same composition. The difference will only be in price and brand.
Gypsum versus cement
It is worth considering another representative of dry mixes. These include cement mortar. Widely used for interior and exterior wall decoration. But there is one huge downside to using it. It is not recommended to use in the decoration of residential premises. Therefore, in this case, if you are faced with the question of which plaster is better than gypsum or cement, then the first option is preferred. Although the second applicant has a number of advantages:
- Increased durability.
- High service life.
- The finished coating becomes perfectly even.
- Can be used for wet areas.
It is worth noting that the surface can crack only if you prepared the solution not according to the instructions. And it is worth remembering that the surface should dry on its own without using a building hair dryer.
In construction stores you can find cement plasters with various fillers. Most often, this role is played by sand of different fractions.
Cement mix manufacturers
Modern technologies have stepped far forward. Any mixture can be found in the store, and not prepared independently from improvised materials. You know which gypsum plaster is better, but here is the rating of the most sought-after cement mixture manufacturers:
- "Knauf". Dry mix can be found in packed bags with a volume of 5 to 30 kg. The cost does not exceed 450 rubles per package. You can choose plaster with additives that are suitable for finishing both residential and exterior walls.
- "Bergauf". Produced in bags of 25 kg. The cost of one package is about 270 rubles. Most often used for rough finishing of premises.
- "Founding". Produced in bags of 25 and 30 kg. It differs from all previous types in light weight and economical consumption. The price for one bag is about 195 rubles.
- "Volma Aquaplast". The dry mixture is packaged in bags of 25 kg. The cost of one package is 220-230 rubles. The composition contains not only cement, but also mineral components.
Still, gypsum plaster is suitable for interior decoration. Which is better - you know. And now you know the brands of cement mixtures.
Recommendations
Still, if you are faced with a choice, you can read the advice of experts:
- gypsum mixture - plastic;
- cement mortar will provide surface strength;
- gypsum mixture will dry faster and no finishing will be needed;
- and, of course, gypsum mortar is not suitable for finishing facades.
Third is not superfluous
You know a lot about gypsum and cement mixture. Each of them deserves attention. What do you think, which plaster is better - gypsum or lime? We will tryanswer this question. To begin with, it is worth considering the advantages and disadvantages of the mixture. Let's start with the bad moments:
- After drying, the wall may still be uneven.
- It takes a long time to dry. This takes about two days.
- The plaster is not solid. If a nail is driven into the treated wall, the lime layer may crumble.
Along with all the disadvantages, there are also advantages:
- Cheap and affordable.
- The finished solution does not dry for a long time, so you have the opportunity to dilute it for future use.
- Making lime plaster is easy and simple (compared to cement plaster).
- You can use the mixture for mashing concrete, wood or brick.
But it's not just walls that need good plastering.
Ceiling mix
To answer the question of which gypsum plaster is best for the ceiling, you should learn some professional tricks:
- This blend is perfect for tops with a drop of less than 5 cm.
- Gypsum mix can be used to seal joints between slabs.
- Before applying gypsum plaster, be sure to prime the ceiling and wait until it dries.
It is worth paying attention to two well-known manufacturers of this category of goods:
- The Knauf-Rotband brand remains the unchanging leader. Produced in paper bags of 30 kg. The cost of one package is about 370 rubles.
- Competition to German quality can only be made by our domestic manufacturer, namely "Prospectors". The mixture is packed in bags of 30 kg. The cost is about 300 rubles.
Now you know which gypsum plaster is best not only for walls, but also for ceilings. Among the entire range presented, you can choose a quality mixture that is right for you.
