If you are interested in the Kaleo brand, you can always purchase underfloor heating from this manufacturer at an affordable price. This system is a versatile film suitable for any type of finish. If you are faced with the task of quickly installing a heating system, then the described option will be the best solution. It is not necessary to start repairs for this, it is possible to lay the underfloor heating where necessary. This may apply to the coolest places in the room. A similar system is also suitable for wooden coatings, it is able to create a uniform and gentle heating. The thickness of the system is 0.42 mm.
Description of underfloor heating film system
Recently, the Kaleo brand has become quite common, the warm floors of this company are a two-layer thermal film, inside which there are carbon heating elements, as well as a copper bus. It is located alongfilms. In the process of connecting to the mains, the coating begins to study anionic particles and far infrared rays. Electricity is supplied by copper wires. But the connection of the thermal film to the network is carried out in a parallel way. An underfloor heating underlay is necessary and is used in order for the heating element to direct the heat flow to the floor covering. The substrate has reflective characteristics. That is why, when laying the system, you can not worry about the fact that the ceiling of the neighbors will also be heated
Positive Features
On sale today you can find products in a wide range of Kaleo brands, warm floors are no exception. Before buying, it is worth considering the main advantages and disadvantages of the described system. Among the former are ease of installation, economy and maximum safety, the latter of which is confirmed when compared with other systems. Any home master will be able to carry out installation work in just 3 hours. Savings are manifested not only in the process of laying, but also during operation. Installation does not involve the arrangement of a screed, as well as the use of all kinds of mastics and glue, which will save money. If you decide to choose a Kaleo product, you can purchase underfloor heating from this manufacturer in the required footage, and then divide the film into a certain number of modules. After the installation has been made, you will be able to save electricity, since when operating suchsystems bills are reduced by 20%.
Quite often, today's consumers are particularly concerned about security. Infrared heaters are a better option in this regard than electric underfloor heating.
Reviews on the durability of the floor infrared heating system
The manufacturer uses patented technologies in the manufacture of the described systems, which allows for almost trouble-free operation for a long time. Consumer reviews serve as confirmation. As practice shows, even with mechanical damage, only individual sections and strips fail. The rest of the system continues to work properly. Consumers emphasize that the film does not corrode. And the manufacturer provides a guarantee for 15 years.
Installation recommendations
Infrared warm floor "Kaleo" you can install yourself. It can be laid under parquet or laminate, but in this case it will be necessary to lay a plastic film, it will protect the system from moisture. Initially, you need to check how durable the rough coating is, after which the master starts laying the reflector, which Izolon can act as. When you install the Kaleo warm floor, the reviews of which were presented above, at the next stage you can proceed to laying the film itself, the next layer will be polyethylene. A laminate or parquet board is laid on top. If you chose linoleum or carpet as a finish, then fiberboard or plywood must be laid on top of the polyethylene, this is done to prevent damage to the thermal film.
Method of laying underfloor heating under linoleum or carpet
Film underfloor heating "Kaleo" will function perfectly under the aforementioned decorative coatings. Initially, it is necessary to check the quality of the rough coating or screed. Next should be a heat-reflecting material, as in the above case. On top of it is a Caleo film, and after that all layers are covered with plastic wrap. This is followed by fiberboard or plywood, and the final coating will be decorative: linoleum or carpet.
The nuances of laying tiles
At the first stage, materials are prepared, namely a set of underfloor heating, as well as film, adhesive tape and fiberboard. Experts especially emphasize that it is forbidden to use materials based on aluminum foil. It is important to determine the surface area on which the warm floor will be located. After that, you can begin to cover the heat-reflecting material. The thermal film is laid out on top without an air gap.
After that, the thermostat is installed. It is also important to remember the need to lay the installation wires, after which the master determines the location of the insulation removal. The next step is to connect the wires and thermal film. It is important to isolate the connections well.
Conclusion
Kaleo warm floors, installationwhich you can carry out on your own, must be connected to a thermostat. The latter is connected to the electrical network. Before completing the work, the system will have to be tested, only after that it is possible to lay a plastic film on top. The final step will be laying the finish flooring. Keep in mind that not every coating can be used for this.
