Plen infrared heater is the latest heating system developed by Russian scientists. It is presented in the form of a film, and its thickness may vary. Depending on this, its parameters may be different. A resistive device is used as a heating element in the film. The Plane systems are installed, as a rule, on the ceiling in the room and secured with a variety of fixing building elements.
In this situation, much depends on the thickness of the ordered film. However, there are precautions in this regard. As experts assure, when installing Plane elements, you can not use any metal objects, as well as mirrors. With the correct installation of the system, only objects will be heated, not air. Refer elements "Plen" to convective heating systems.
Features of "Plen" systems
First of all, it should be noted the high performance of the Plain film. Given the smallelectricity consumption of the system, it pays for itself in about three years. Manufacturers give a good guarantee for this product, and it can last about 50 years. Installation of the above system will be inexpensive and should be taken into account. On average, specialists for the installation of sq. m. ask on the market for 1500 rubles. As you know, these systems do not require maintenance. Using the control unit, you can adjust the power of the device.
Thus, in the absence of people in the house, it is possible to set the system to an economical mode. Since the Plain brand heaters are those that do not heat the air, the walls do not dry out. You can use the system safely in winter without ventilation. Additionally, it should be noted that the emitted infrared rays prevent the appearance of mold on the walls. Thus, the room will always remain dry with a normal level of humidity. Costs an average sq. m. canvas about 1300 rubles.
Main System Features
Productivity as well as power consumption should be attributed to the main characteristics of Plan systems. Additionally, the buyer should take into account the level of efficiency. The limiting temperature of the heating element depends on the thickness of the web. On the surface of the heater, it will be slightly lower. This parameter can also be checked with the manufacturer. The power source of the Plan system is a network with a voltage of 180, 200 or 220 V. The radiation wavelength depends on the size of the heating element. When installingimportant is the thickness, as well as the weight of the square. m. linen.
Plan 1.2 film parameters
This film "Plain" (heating) technical characteristics has the following: the power supply of the heating element is 180 V, and the current consumption is 1 A per square. m. The specific power of the film is 130 kW per sq. m. As the name implies, the thickness of the canvas is 1.2 mm. The average radiation wavelength is 9 µm. The minimum temperature of the heating element reaches 47 degrees. The voltage consumption of the heater is at the level of 200 V. A square meter of linen costs exactly 1,500 rubles.
Reviews about this heating system
The indicated system "Plen" has good reviews from the owners. Many buyers prefer this canvas because it is ideal for a small house. Power consumption is negligible, which is good news. Also, the film "Plan" received good reviews among people because of the high quality of the product and the protection class. Due to this, the canvas is fireproof. The room heats up pretty quickly. It is comfortable to use the control unit.
How to install the canvas?
In order to qualitatively install "Plen" (heating) in the house, do-it-yourself installation should begin with measurements. Before starting work, it is important to take care of the work surface. In this case, the ceiling must be very carefully cleaned. If it has paint on it, then you can use a solvent. If wallpaper was used during the repair, you need to remove everything with a spatula. Next, you needtreat the surface with a primer and completely smooth and level everything.
After that, the length of the canvas is calculated (based on the quadrature of the room). From the edge of the wall, the minimum indent should be at least 2 cm. Then fasteners should be prepared. For a canvas of this thickness, it is more advisable to use plastic studs. In some cases, experts advise using hooks. However, they are a more expensive fastener, this must be taken into account. To fix the canvas, a person will need an assistant.
The second sheet is superimposed on the first one at the edge by about 3 cm. Fastening along the sheet should be carried out every 20 cm. It is very important not to touch the heating elements. Otherwise, the power wires may be damaged. As a result, the integrity of the reflective film will be compromised. It will be impossible to restore the dielectric coating after that. After fixing the system, you should deal with the control unit. In this case, much depends on its type. Basically, manufacturers offer conventional devices with three modes. The unit is installed near the outlet.
To avoid short circuits, before fixing the box, you need to find out about the location of the wiring in the house. This can be done quite simply - using the tester. Further, a special Plane modulator is attached next to the power supply. Connecting the system to the outlet is the last step. Full heating of the element in this case will leave about 40 minutes. If the heater does not work, disconnect the unit from the mains andcheck the integrity of the winding.
Characteristics of the film "Plain 1.4"
This film ("Plen"-heating) has the following technical characteristics: the maximum voltage is 180 V, and the operating current is 3 A. An additional layer of isolon is used as a coating. The thermostat in this model is installed with the marking "TU3". In turn, modulators can be used in a variety of ways. The wiring in this case is PV2. Cable channels are included with a length of 3 meters.
To connect the heater to the network, this is enough. Also, this system is equipped with a special magnetic starter company "Electric". The maximum load is maintained at the level of 30 A. The efficiency of such devices reaches 80%. The peak power of the modulator is 4 kW. The consumption of the system is acceptable. An economical mode of use is provided on the control unit. In this case, approximately 6 kW per hour will be consumed per hour of operation. Worth sq. m. cloth with a thickness of 1.4 mm about 1500 rubles.
What do they say about the Plan 1.4 system?
And this "Plen" system receives positive feedback from the owners. Many buyers praise 1.4mm film for its compactness. When it is installed, the room does not lose anything in size. The installation of the canvas is carried out quite quickly. If you hire skilled workers, then the installation of sq. m. film costs an average of about 1400 rubles. Combustion products are completely absent from the system. This way, the air is always clean.
Directly heating "Plen"-system is carried out evenly. You can use the control unit absolutely under any weather conditions. Among the shortcomings, one should take into account the long time for temperature settling. Thus, it will not be possible to warm up instantly. The limiting temperature of the heating element is not very high, this should be taken into account. Despite the fact that the specified system "Plen" technical characteristics are quite good, in winter it is better to use the film in conjunction with other heating devices.
Mounting Features
Using a 1.4 mm film ("Plan"), you can make a warm floor in the house yourself. The canvas should be fastened with dowels. Before starting work, it is important not to forget to completely clean the surface. sq. m. The canvas weighs 750 g, so you need to fix it on the floor every 20 cm. The indent from the wall should be standard - 2 cm. It is better to adjust the canvas on the sheet based on the quadrature of the room. The minimum distance of the flooring for fixing the film is 3 cm. It is important not to use any metal objects. If there are mirrors on the walls, they must be set aside at a safe distance.
Main parameters of Plan 1.6
This "Plain" system has the following characteristics: the radiation wavelength is 10 microns, and the limiting voltage is 200 V. Electricity consumption is 1 A per square meter. m. The operating frequency of the heater is around 22 Hz. The heating element in this case is resistive. Its maximum power reaches 150 watts per sq. m. On the surface in economy mode, the maximum temperature is 40 degrees.
The efficiency of the heater is at 70%. Thus, its performance is quite high. The density of the material in the system is 7 kg per cubic meter. m. The coating in the production is used lavsan. The thermostat is installed by default three-channel. The electrical panel during installation uses a standard one from the Salyut company with a voltage of 220 V. It can withstand a load of up to 30 A. The modulator in the standard kit is marked PRK20.
Consumer feedback on canvas
This Plan system has exceptionally good reviews from the owners, many buyers purchase the above canvas for greenhouses. It keeps the temperature in the room perfectly, there are no complaints about performance. Also, this system is often chosen for heating various cafes and restaurants. The peculiarity of this heater is that the humidity always remains normal.
Considering the material thickness of 1.6mm, the heating element is quite powerful. Therefore, the heating rate takes little time. As the owners note, the room warms up evenly and the walls always remain dry. Infrared rays, in general, do not adversely affect human he alth. You can stay indoors with the device turned on for a long time without any risk. Worth sq. m. of the specified canvas in a specializedstore about 1700 rubles. If you do not install it yourself, for each sq. m. will have to pay 1,500 rubles to specialists
Can I install it myself?
Reviews say that the installation of "Plen" (heater) can be carried out absolutely independently. In this case, it is very important to responsibly treat the surface primer. This is necessary for a snug fit of the material to the ceiling. Thus, mold will never appear indoors. As fasteners, experts advise using dowels. In this situation, much depends on the material of the walls.
If the house is panel, then the dowels fit perfectly. When it comes to wooden surfaces, you can save on clamps and take, for example, hooks with caps. In a twist, they are a little more complicated, but the owner will spend an order of magnitude less money. Before installing the control unit, the wiring must be checked without fail. Otherwise, you can damage it and short the circuit completely. To avoid any malfunctions, all metal objects must be removed from the film during installation. It is also desirable to get rid of mirrors. The modulator comes with two channels. It is attached to the control unit through two connectors.
Important characteristics of the heater "Plain 1.8"
Power sq. m. canvas is 5 kW, and the operating frequency is 23 Hz. For an hour of continuous operation, the heating element consumes about 6 A per minute. The efficiency is atthe level of 86%. Power is supplied through a network with a voltage of 220 V. The control unit is standard. Economy mode is not provided by the manufacturer. The peak power of the system is capable of reaching up to 6 kW.
In general, the surface of the canvas is fireproof. The density of the material is in the region of 8 kg per cubic meter. m. The wavelength of radiation in this case is 9 microns. By default, the modulator is installed in the MPP 23 series. Binding to the power cable can be done using various fasteners. The electrical panel for this heating system is suitable for the Salyut type. The magnetic starter in this model is provided by the manufacturer. Will cost sq. m. canvases to the buyer for 1550 rubles. At the same time, the installation of sq. m. film costs an average of about 1700 rubles.
Owners' opinions about the system
The specified "Plen" system deserves positive feedback from the owners, because this film can be used in various rooms. It is ideal for brick houses. At the same time, she will also find a place in various workshops. The electric heating element in the canvas is installed resistive. This heating system is very easy to maintain.
If necessary, it can always be cleaned by wiping with a dry cloth. Also, the Plan system has good reviews because of the absolutely silent operation. In winter, infrared rays have a beneficial effect on the skin, and this should be taken into account. Thus, on cloudy days, this film is able to have a positive effect on the human body.
Installing film in the house
Using the fastening elements, you can independently make the installation of "Plen". The heating is regulated by the control unit. In installation, it is quite simple, anyone can switch modes. To fix the film, you need to make all measurements and prepare fasteners. Work should always start from the edge. If the heating element is damaged, the canvas can be thrown away immediately. Thus, the sheets must be fastened very carefully.
Minimum overlay must be done by 5 cm. Hooks in this case are not recommended. Otherwise, after a while, the sheet may sag, and this is undesirable. In this regard, everything is done very quickly with dowels. They are expensive on the market, but such elements are reliable. As a result, you can ignore them for many years.
Plen 2.0 heater parameters
The maximum surface heating temperature is 30 degrees, and the maximum voltage is 200 V. The heater can withstand a load of 30 A. The thermostat in this model is installed in the PP233 series. The connection to the network can be carried out in various ways, and the cable length is 3 meters. As you can see from the name of the heater, the thickness of the web is 2 mm. The radiation wavelength in this case is 9 microns.
The operating power of this heating system is at the level of 5 kW. For an hour of continuous operation, it consumes an average of about 8 kW. The efficiency in this case reaches a maximum of 85%. The density of the material inside is 8 kg percube m. The control unit is powered from a network with a voltage of 200 V. The limiting power of the modulator is exactly 5 kW. Worth sq. m. film in a specialized store about 1800 rubles. Installation in this case will cost the owner about 1600 rubles. per sq. m.
Reviews about the Plan 2.0 system
Most of all, 2.0 mm thick film is suitable for heating various administrative premises. At the same time, it can be installed in a residential building. In operation, it is simple and does not require special attention. The heating of the room is carried out for quite a long time, but this is perhaps the only drawback of this system. In winter, this heater is best used with other heating appliances.
They say that saving on electricity with this film can be quite simple. In this case, it is important to learn how to use the control unit correctly. In damp rooms, this heater can also be used. After a few hours of operation, the humidity returns to normal. Also, many fell in love with this system for a long shelf life. Given the low cost of the goods, this is considered a significant advantage.
How best to fix the film?
In order to qualitatively install Plan (heating) in the house, do-it-yourself installation must be done using only dowels. Power supplies are fixed directly near the sockets. The modulator is also fixed there. To use the heating system safely, the minimum distance from the edge of the wall must be 3 cm.this indent should be at least 4 cm based on the square of the room.
Before work, the wiring must be checked by a tester. Otherwise, situations with a short circuit are possible. The use of metal objects during installation is strictly prohibited. When fixing the film on the surface, glue is also not recommended. It is necessary to pierce the protective layer carefully so as not to damage the heating elements.
Characteristics of the heater "Plen 2.2"
The power of the ceiling "Plen 2.2" is 5 kW, and the operating frequency is 55 Hz. There is only one thermostat installed. Alufom is used as an additional layer. In this case, it significantly improves system performance. The efficiency is at the level of 77%. The wiring in the system is used in the PV3 series with increased thermal insulation. There is electric automatics in the control unit, the modes are set only manually.
A magnetic starter is also installed in the system. The maximum temperature of the resistive heating element reaches 55 degrees. The radiation wavelength is on average 10 µm. The power source of the system is a network with a voltage of 220 V. The peak power of the modulator is at the level of 6 kW. sq. m. canvas weighs exactly 800 g, and the density of the internal material is 8 kg per cubic meter. m.
