Organization of sewerage is a rather complicated process. However, if a person decides to independently engage in its arrangement, then this is quite possible. The main point in this case is the knowledge of the features of the process, which will allow you not to encounter difficulties, of which there are quite a lot.
So, when deciding how to make a sewer in a private house, it is important to pay attention to many details. The first thing to know is that the system in this case can have four versions.
The most primitive option is with a cesspool. This method is quite old, and its practicality at the moment can be considered zero. You should not dwell on this option in detail, since in this case the advantagesthere are no, there are only minuses.
Another option for making a sewer in a private house is a concrete system consisting of a series of overflow wells. This option may not be suitable for many, since its implementation is very difficult. And it is worth noting that this will require digging the entire site, which is not always possible to implement. When using such a system, there is a need to constantly call for vacuum trucks, and for this it will be necessary to provide unobstructed access for their car.
The next option, how to make a sewer in a private house, is to use a plastic, metal or fiberglass septic tank, which is mounted through filtration fields. The disadvantage in this case is the clogging of the filters, which occurs quite regularly, and this leads to a very unpleasant odor in the area.
The best option for how to make a sewer in a private house is called a deep cleaning station. This way is simple and convenient, it is easy to mount such a structure on the site yourself. If the groundwater is low, then it is quite possible to arrange a gravity outlet for purified water. If the passage of groundwater is high, then it will be necessary to organize the withdrawal after cleaning forcibly. In addition to the groundwater level, in this case, the degree of soil permeability in the area should also be taken into account.
How to do it rightsewerage in a private house?
First you need to dig a foundation pit. The deep cleaning station has dimensions of 150150230 centimeters at least. Its location should be such that the receiving pipe enters without any obstacles. When the pit is dug, the station should be lowered into it, and then it should be leveled. The next step is to fill the station with water up to special marks. The entire structure must be sprinkled with sand.
Next, you will need to dig trenches for laying pipelines. For inlet drains, a slope of 2 degrees should be observed. The station requires electrical power to function properly. The cable should be laid in a plastic pipe to provide adequate protection.
So, now you know how to build a sewer in a private house.
